Il 04/12/23 09:40, Chen-Yu Tsai ha scritto:
Tentacruel and Tentacool are MT8186 based Chromebooks based on the
Krabby design.
Tentacruel, also known as the ASUS Chromebook CM14 Flip CM1402F, is a
convertible device with touchscreen and stylus.
Tentacool, also known as the ASUS Chromebook CM14 CM1402C, is a laptop
device. It does not have a touchscreen or stylus.
The two devices both have two variants. The difference is a second
source touchpad controller that shares the same address as the original,
but is incompatible.
The extra SKU IDs for the Tentacruel devices map to different sensor
components attached to the Embedded Controller. These are not visible
to the main processor.
Signed-off-by: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
Acked-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
---
Changes since v2:
- Picked up Conor's ack
- Rename touchpad to trackpad
- Drop pinctrl properties from trackpad in tentacruel/tentacool second
source trackpad
Changes since v1:
- Reorder SKU numbers in descending order.
- Fixed pinconfig node names
- Moved pinctrl-* properties after interrupts-*
- Switched to interrupts-extended for external components
- Marked ADSP as explicitly disabled, with a comment explaining that it
stalls the system
- Renamed "touchpad" to "trackpad"
- Dropped bogus "no-laneswap" property from it6505 node
- Moved "realtek,jd-src" property to after all the regulator supplies
- Switched to macros for MT6366 regulator "regulator-allowed-modes"
- Renamed "vgpu" regulator name to allow coupling, with a comment
containing the name used in the design
- Renamed "cr50" node name to "tpm"
- Moved trackpad_pins reference up to i2c2; workaround for second source
component resource sharing.
- Fix copyright year
- Fixed touchscreen supply name
arch/arm64/boot/dts/mediatek/Makefile | 4 +
.../dts/mediatek/mt8186-corsola-krabby.dtsi | 129 ++
.../mt8186-corsola-tentacool-sku327681.dts | 57 +
.../mt8186-corsola-tentacool-sku327683.dts | 24 +
.../mt8186-corsola-tentacruel-sku262144.dts | 44 +
.../mt8186-corsola-tentacruel-sku262148.dts | 26 +
.../boot/dts/mediatek/mt8186-corsola.dtsi | 1719 +++++++++++++++++
7 files changed, 2003 insertions(+)
create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi
create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327681.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index e6e7592a3645..442af61b1305 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -43,6 +43,10 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku32.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327681.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327683.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacruel-sku262144.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacruel-sku262148.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r1.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r5-sku2.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi
new file mode 100644
index 000000000000..9b2b64525961
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ aliases {
+ i2c4 = &i2c4;
+ };
+};
+
+&dsi_out {
+ remote-endpoint = <&ps8640_in>;
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+
+ ps8640: edp-bridge@8 {
+ compatible = "parade,ps8640";
+ reg = <0x8>;
+ powerdown-gpios = <&pio 96 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&pio 98 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ps8640_pins>;
+ vdd12-supply = <&mt6366_vrf12_reg>;
+ vdd33-supply = <&mt6366_vcn33_reg>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ ps8640_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ ps8640_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+
+ aux-bus {
+ panel {
+ compatible = "edp-panel";
+ power-supply = <&pp3300_disp_x>;
+ backlight = <&backlight_lcd0>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&ps8640_out>;
+ };
+ };
+ };
+ };
+ };
+};
+
+&i2c1 {
+ i2c-scl-internal-delay-ns = <10000>;
+
+ touchscreen: touchscreen@10 {
+ compatible = "hid-over-i2c";
+ reg = <0x10>;
+ interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&touchscreen_pins>;
+ post-power-on-delay-ms = <10>;
+ hid-descr-addr = <0x0001>;
+ vdd-supply = <&pp3300_s3>;
+ };
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins>;
+ clock-frequency = <400000>;
+ status = "okay";
+
+ proximity@28 {
+ compatible = "semtech,sx9324";
+ reg = <0x28>;
+ interrupts-extended = <&pio 5 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sar_sensor_pins>;
+ vdd-supply = <&mt6366_vio18_reg>;
+ svdd-supply = <&mt6366_vio18_reg>;
+ #io-channel-cells = <1>;
From the newest DTS coding style document:
The following order of properties in device nodes is preferred:
1. compatible
2. reg
3. ranges
4. Standard/common properties (defined by common bindings, e.g. without
vendor-prefixes)
5. Vendor-specific properties
6. status (if applicable)
7. Child nodes, where each node is preceded with a blank line
The "status" property is by default "okay", thus it can be omitted.
The above-described ordering follows this approach:
1. Most important properties start the node: compatible then bus addressing to
match unit address.
2. Each node will have common properties in similar place.
3. Status is the last information to annotate that device node is or is not
finished (board resources are needed).
#io-channel-cells goes after `reg` (same for the other instances) :-)
+ };
+};
+
+&pio {
+ i2c4_pins: i2c4-pins {
+ pins-bus {
+ pinmux = <PINMUX_GPIO136__FUNC_SDA4>,
+ <PINMUX_GPIO135__FUNC_SCL4>;
+ bias-disable;
+ drive-strength = <4>;
+ input-enable;
+ };
+ };
+
+ ps8640_pins: ps8640-pins {
+ pins-pwrdn-rst {
+ pinmux = <PINMUX_GPIO96__FUNC_GPIO96>,
+ <PINMUX_GPIO98__FUNC_GPIO98>;
+ output-low;
+ };
+ };
+
+ sar_sensor_pins: sar-sensor-pins {
+ pins-irq {
+ pinmux = <PINMUX_GPIO5__FUNC_GPIO5>;
+ input-enable;
+ bias-pull-up;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327681.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327681.dts
new file mode 100644
index 000000000000..9bb64353ca65
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327681.dts
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-krabby.dtsi"
+
+/ {
+ model = "Google Tentacool board";
+ compatible = "google,tentacruel-sku327681", "google,tentacruel", "mediatek,mt8186";
+ chassis-type = "laptop";
+};
+
+/* Tentacool omits the pen. */
+&gpio_keys {
+ status = "disabled";
+};
+
+/* Tentacool omits the touchscreen; nothing else is on i2c1. */
+&i2c1 {
+ status = "disabled";
+};
+
+&keyboard_controller {
+ function-row-physmap = <
+ MATRIX_KEY(0x00, 0x02, 0) /* T1 */
+ MATRIX_KEY(0x03, 0x02, 0) /* T2 */
+ MATRIX_KEY(0x02, 0x02, 0) /* T3 */
+ MATRIX_KEY(0x01, 0x02, 0) /* T4 */
+ MATRIX_KEY(0x03, 0x04, 0) /* T5 */
+ MATRIX_KEY(0x02, 0x04, 0) /* T6 */
+ MATRIX_KEY(0x01, 0x04, 0) /* T7 */
+ MATRIX_KEY(0x02, 0x09, 0) /* T8 */
+ MATRIX_KEY(0x01, 0x09, 0) /* T9 */
+ MATRIX_KEY(0x00, 0x04, 0) /* T10 */
+ >;
+
+ linux,keymap = <
+ MATRIX_KEY(0x00, 0x02, KEY_BACK)
+ MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+ MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+ MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+ MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+ MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+ MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+ MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+ MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+ MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+ CROS_STD_MAIN_KEYMAP
+ >;
+};
+
+/* Tentacool omits the touchscreen. */
+&touchscreen {
+ status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts
new file mode 100644
index 000000000000..c3ae6f9616c8
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+#include "mt8186-corsola-tentacool-sku327681.dts"
+
+/ {
+ compatible = "google,tentacruel-sku327683", "google,tentacruel", "mediatek,mt8186";
+};
+
+/* This variant replaces only the trackpad controller. */
+&i2c2 {
+ /delete-node/ trackpad@15;
Why are you deleting the trackpad@15 node?
You can simply override the compatible, or actually omit the compatible string
in the *.dtsi file, and set just that in each board *.dts.
dtsi:
trackpad_a: trackpad@15 {
/* Compatible is set in each board dts */
reg, interrupts, others
}
dts:
&trackpad_a {
compatible = "elan,ekth3000";
};
other dts:
&trackpad_a {
compatible = "hid-over-i2c";
};
+
+ trackpad@15 {
+ compatible = "hid-over-i2c";
+ reg = <0x15>;
+ interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
+ hid-descr-addr = <0x0001>;
+ vdd-supply = <&pp3300_s3>;
+ wakeup-source;
+ };
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts
new file mode 100644
index 000000000000..26d3451a5e47
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2022 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8186-corsola-krabby.dtsi"
+
+/ {
+ model = "Google Tentacruel board";
+ compatible = "google,tentacruel-sku262147", "google,tentacruel-sku262146",
+ "google,tentacruel-sku262145", "google,tentacruel-sku262144",
+ "google,tentacruel", "mediatek,mt8186";
+ chassis-type = "convertible";
+};
+
+&keyboard_controller {
+ function-row-physmap = <
+ MATRIX_KEY(0x00, 0x02, 0) /* T1 */
+ MATRIX_KEY(0x03, 0x02, 0) /* T2 */
+ MATRIX_KEY(0x02, 0x02, 0) /* T3 */
+ MATRIX_KEY(0x01, 0x02, 0) /* T4 */
+ MATRIX_KEY(0x03, 0x04, 0) /* T5 */
+ MATRIX_KEY(0x02, 0x04, 0) /* T6 */
+ MATRIX_KEY(0x01, 0x04, 0) /* T7 */
+ MATRIX_KEY(0x02, 0x09, 0) /* T8 */
+ MATRIX_KEY(0x01, 0x09, 0) /* T9 */
+ MATRIX_KEY(0x00, 0x04, 0) /* T10 */
+ >;
+
+ linux,keymap = <
+ MATRIX_KEY(0x00, 0x02, KEY_BACK)
+ MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+ MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+ MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+ MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+ MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+ MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+ MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+ MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+ MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+ CROS_STD_MAIN_KEYMAP
+ >;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts
new file mode 100644
index 000000000000..447b57b12b41
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2023 Google LLC
+ */
+
+#include "mt8186-corsola-tentacruel-sku262144.dts"
+
+/ {
+ compatible = "google,tentacruel-sku262151", "google,tentacruel-sku262150",
+ "google,tentacruel-sku262149", "google,tentacruel-sku262148",
+ "google,tentacruel", "mediatek,mt8186";
+};
+
+/* This variant replaces only the trackpad controller. */
+&i2c2 {
+ /delete-node/ trackpad@15;
+
+ trackpad@15 {
+ compatible = "hid-over-i2c";
+ reg = <0x15>;
+ interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
+ hid-descr-addr = <0x0001>;
+ vdd-supply = <&pp3300_s3>;
+ wakeup-source;
+ };
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
new file mode 100644
index 000000000000..8726b2916ef1
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
@@ -0,0 +1,1719 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2022 MediaTek Inc.
+ */
+/dts-v1/;
+#include "mt8186.dtsi"
+#include <dt-bindings/pinctrl/mt8186-pinfunc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/regulator/mediatek,mt6397-regulator.h>
+
+/ {
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c5 = &i2c5;
+ mmc0 = &mmc0;
+ mmc1 = &mmc1;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ /* The size should be filled in by the bootloader. */
+ reg = <0 0x40000000 0 0>;
+ };
+
+ backlight_lcd0: backlight-lcd0 {
+ compatible = "pwm-backlight";
+ pwms = <&pwm0 0 500000>;
+ power-supply = <&ppvar_sys>;
+ enable-gpios = <&pio 152 0>;
+ brightness-levels = <0 1023>;
+ num-interpolated-steps = <1023>;
+ default-brightness-level = <576>;
+ };
+
+ btsco: bt-sco {
Do you really need the phandle to bt-sco?
Also, this node describes a codec, so: "bt-sco-codec" please!
+ compatible = "linux,bt-sco";
+ #sound-dai-cells = <0>;
+ };
+
+ dmic_codec: dmic-codec {
This phandle is unused...
..snip..
+
+&adsp {
+ memory-region = <&adsp_dma_mem>, <&adsp_mem>;
+ status = "disabled"; /* causes stall */
This is a firmware issue: once the correct firmware is uploaded to linux-firmware
the dsp node can get enabled... so it we make sure that this happens before this
devicetree gets picked, we can avoid a second commit enabling audio.
After all, since we *want to* use the Xtensa DSP for audio, without it booted
sound won't work *anyway*.... so having the firmware in place can also be seen
as a direct dependency of the entire audio functionality.
P.S.: The FW that is distributed with ChromeOS works just fine!
+};
+
+&afe {
+ i2s0-share = "I2S1";
+ i2s3-share = "I2S2";
+ status = "okay";
+};
+
..snip..
+&i2c2 {
+ pinctrl-names = "default";
+ /*
+ * Trackpad pin put here to work around second source components
+ * sharing the pinmux in steelix designs.
+ */
+ pinctrl-0 = <&i2c2_pins>, <&trackpad_pin>;
There's no choice for now... even if this is not beautiful to see... but it's still
ok for me because we can revisit this later when the HW Prober mechanism will be
upstreamed.
+ clock-frequency = <400000>;
+ i2c-scl-internal-delay-ns = <10000>;
+ status = "okay";
+
+ trackpad@15 {
+ compatible = "elan,ekth3000";
+ reg = <0x15>;
+ interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
+ vcc-supply = <&pp3300_s3>;
+ wakeup-source;
+ };
+};
+
Thanks,
Angelo
