Hello Chen-Yu,
On 12/4/23 10:40, Chen-Yu Tsai wrote:
> Tentacruel and Tentacool are MT8186 based Chromebooks based on the
> Krabby design.
>
> Tentacruel, also known as the ASUS Chromebook CM14 Flip CM1402F, is a
> convertible device with touchscreen and stylus.
>
> Tentacool, also known as the ASUS Chromebook CM14 CM1402C, is a laptop
> device. It does not have a touchscreen or stylus.
>
> The two devices both have two variants. The difference is a second
> source touchpad controller that shares the same address as the original,
> but is incompatible.
>
> The extra SKU IDs for the Tentacruel devices map to different sensor
> components attached to the Embedded Controller. These are not visible
> to the main processor.
>
> Signed-off-by: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
> Acked-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
> ---
> Changes since v2:
> - Picked up Conor's ack
> - Rename touchpad to trackpad
> - Drop pinctrl properties from trackpad in tentacruel/tentacool second
> source trackpad
>
> Changes since v1:
> - Reorder SKU numbers in descending order.
> - Fixed pinconfig node names
> - Moved pinctrl-* properties after interrupts-*
> - Switched to interrupts-extended for external components
> - Marked ADSP as explicitly disabled, with a comment explaining that it
> stalls the system
> - Renamed "touchpad" to "trackpad"
> - Dropped bogus "no-laneswap" property from it6505 node
> - Moved "realtek,jd-src" property to after all the regulator supplies
> - Switched to macros for MT6366 regulator "regulator-allowed-modes"
> - Renamed "vgpu" regulator name to allow coupling, with a comment
> containing the name used in the design
> - Renamed "cr50" node name to "tpm"
> - Moved trackpad_pins reference up to i2c2; workaround for second source
> component resource sharing.
> - Fix copyright year
> - Fixed touchscreen supply name
>
> arch/arm64/boot/dts/mediatek/Makefile | 4 +
> .../dts/mediatek/mt8186-corsola-krabby.dtsi | 129 ++
> .../mt8186-corsola-tentacool-sku327681.dts | 57 +
> .../mt8186-corsola-tentacool-sku327683.dts | 24 +
> .../mt8186-corsola-tentacruel-sku262144.dts | 44 +
> .../mt8186-corsola-tentacruel-sku262148.dts | 26 +
> .../boot/dts/mediatek/mt8186-corsola.dtsi | 1719 +++++++++++++++++
> 7 files changed, 2003 insertions(+)
> create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi
> create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327681.dts
> create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts
> create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts
> create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts
> create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
>
> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> index e6e7592a3645..442af61b1305 100644
> --- a/arch/arm64/boot/dts/mediatek/Makefile
> +++ b/arch/arm64/boot/dts/mediatek/Makefile
> @@ -43,6 +43,10 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku32.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb
> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327681.dtb
> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327683.dtb
> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacruel-sku262144.dtb
> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacruel-sku262148.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-evb.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r1.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r5-sku2.dtb
> diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi
> new file mode 100644
> index 000000000000..9b2b64525961
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi
> @@ -0,0 +1,129 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright 2022 Google LLC
> + */
> +
> +/dts-v1/;
> +#include "mt8186-corsola.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> + aliases {
> + i2c4 = &i2c4;
> + };
> +};
> +
> +&dsi_out {
> + remote-endpoint = <&ps8640_in>;
> +};
> +
> +&i2c0 {
> + clock-frequency = <400000>;
> +
> + ps8640: edp-bridge@8 {
> + compatible = "parade,ps8640";
> + reg = <0x8>;
> + powerdown-gpios = <&pio 96 GPIO_ACTIVE_LOW>;
> + reset-gpios = <&pio 98 GPIO_ACTIVE_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&ps8640_pins>;
> + vdd12-supply = <&mt6366_vrf12_reg>;
> + vdd33-supply = <&mt6366_vcn33_reg>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + ps8640_in: endpoint {
> + remote-endpoint = <&dsi_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + ps8640_out: endpoint {
> + remote-endpoint = <&panel_in>;
> + };
> + };
> + };
> +
> + aux-bus {
> + panel {
> + compatible = "edp-panel";
> + power-supply = <&pp3300_disp_x>;
> + backlight = <&backlight_lcd0>;
> +
> + port {
> + panel_in: endpoint {
> + remote-endpoint = <&ps8640_out>;
> + };
> + };
> + };
> + };
> + };
> +};
> +
> +&i2c1 {
> + i2c-scl-internal-delay-ns = <10000>;
> +
> + touchscreen: touchscreen@10 {
> + compatible = "hid-over-i2c";
> + reg = <0x10>;
> + interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&touchscreen_pins>;
> + post-power-on-delay-ms = <10>;
> + hid-descr-addr = <0x0001>;
> + vdd-supply = <&pp3300_s3>;
> + };
> +};
> +
> +&i2c4 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c4_pins>;
> + clock-frequency = <400000>;
> + status = "okay";
> +
> + proximity@28 {
> + compatible = "semtech,sx9324";
> + reg = <0x28>;
> + interrupts-extended = <&pio 5 IRQ_TYPE_LEVEL_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sar_sensor_pins>;
> + vdd-supply = <&mt6366_vio18_reg>;
> + svdd-supply = <&mt6366_vio18_reg>;
> + #io-channel-cells = <1>;
> + };
> +};
> +
> +&pio {
> + i2c4_pins: i2c4-pins {
> + pins-bus {
> + pinmux = <PINMUX_GPIO136__FUNC_SDA4>,
> + <PINMUX_GPIO135__FUNC_SCL4>;
> + bias-disable;
> + drive-strength = <4>;
> + input-enable;
> + };
> + };
> +
> + ps8640_pins: ps8640-pins {
> + pins-pwrdn-rst {
> + pinmux = <PINMUX_GPIO96__FUNC_GPIO96>,
> + <PINMUX_GPIO98__FUNC_GPIO98>;
> + output-low;
> + };
> + };
> +
> + sar_sensor_pins: sar-sensor-pins {
> + pins-irq {
> + pinmux = <PINMUX_GPIO5__FUNC_GPIO5>;
> + input-enable;
> + bias-pull-up;
> + };
> + };
> +};
> diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327681.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327681.dts
> new file mode 100644
> index 000000000000..9bb64353ca65
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327681.dts
> @@ -0,0 +1,57 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright 2022 Google LLC
> + */
> +
> +/dts-v1/;
> +#include "mt8186-corsola-krabby.dtsi"
> +
> +/ {
> + model = "Google Tentacool board";
> + compatible = "google,tentacruel-sku327681", "google,tentacruel", "mediatek,mt8186";
> + chassis-type = "laptop";
> +};
> +
> +/* Tentacool omits the pen. */
> +&gpio_keys {
> + status = "disabled";
> +};
> +
> +/* Tentacool omits the touchscreen; nothing else is on i2c1. */
> +&i2c1 {
> + status = "disabled";
> +};
> +
> +&keyboard_controller {
> + function-row-physmap = <
> + MATRIX_KEY(0x00, 0x02, 0) /* T1 */
> + MATRIX_KEY(0x03, 0x02, 0) /* T2 */
> + MATRIX_KEY(0x02, 0x02, 0) /* T3 */
> + MATRIX_KEY(0x01, 0x02, 0) /* T4 */
> + MATRIX_KEY(0x03, 0x04, 0) /* T5 */
> + MATRIX_KEY(0x02, 0x04, 0) /* T6 */
> + MATRIX_KEY(0x01, 0x04, 0) /* T7 */
> + MATRIX_KEY(0x02, 0x09, 0) /* T8 */
> + MATRIX_KEY(0x01, 0x09, 0) /* T9 */
> + MATRIX_KEY(0x00, 0x04, 0) /* T10 */
> + >;
> +
> + linux,keymap = <
> + MATRIX_KEY(0x00, 0x02, KEY_BACK)
> + MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
> + MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
> + MATRIX_KEY(0x01, 0x02, KEY_SCALE)
> + MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
> + MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
> + MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
> + MATRIX_KEY(0x02, 0x09, KEY_MUTE)
> + MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
> + MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
> + CROS_STD_MAIN_KEYMAP
> + >;
> +};
> +
> +/* Tentacool omits the touchscreen. */
> +&touchscreen {
> + status = "disabled";
> +};
> diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts
> new file mode 100644
> index 000000000000..c3ae6f9616c8
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacool-sku327683.dts
> @@ -0,0 +1,24 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright 2023 Google LLC
> + */
> +
> +#include "mt8186-corsola-tentacool-sku327681.dts"
> +
> +/ {
> + compatible = "google,tentacruel-sku327683", "google,tentacruel", "mediatek,mt8186";
> +};
> +
> +/* This variant replaces only the trackpad controller. */
> +&i2c2 {
> + /delete-node/ trackpad@15;
> +
> + trackpad@15 {
> + compatible = "hid-over-i2c";
> + reg = <0x15>;
> + interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
> + hid-descr-addr = <0x0001>;
> + vdd-supply = <&pp3300_s3>;
> + wakeup-source;
> + };
> +};
> diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts
> new file mode 100644
> index 000000000000..26d3451a5e47
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts
> @@ -0,0 +1,44 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright 2022 Google LLC
> + */
> +
> +/dts-v1/;
> +#include "mt8186-corsola-krabby.dtsi"
> +
> +/ {
> + model = "Google Tentacruel board";
> + compatible = "google,tentacruel-sku262147", "google,tentacruel-sku262146",
> + "google,tentacruel-sku262145", "google,tentacruel-sku262144",
> + "google,tentacruel", "mediatek,mt8186";
> + chassis-type = "convertible";
> +};
> +
> +&keyboard_controller {
> + function-row-physmap = <
> + MATRIX_KEY(0x00, 0x02, 0) /* T1 */
> + MATRIX_KEY(0x03, 0x02, 0) /* T2 */
> + MATRIX_KEY(0x02, 0x02, 0) /* T3 */
> + MATRIX_KEY(0x01, 0x02, 0) /* T4 */
> + MATRIX_KEY(0x03, 0x04, 0) /* T5 */
> + MATRIX_KEY(0x02, 0x04, 0) /* T6 */
> + MATRIX_KEY(0x01, 0x04, 0) /* T7 */
> + MATRIX_KEY(0x02, 0x09, 0) /* T8 */
> + MATRIX_KEY(0x01, 0x09, 0) /* T9 */
> + MATRIX_KEY(0x00, 0x04, 0) /* T10 */
> + >;
> +
> + linux,keymap = <
> + MATRIX_KEY(0x00, 0x02, KEY_BACK)
> + MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
> + MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
> + MATRIX_KEY(0x01, 0x02, KEY_SCALE)
> + MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
> + MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
> + MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
> + MATRIX_KEY(0x02, 0x09, KEY_MUTE)
> + MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
> + MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
> + CROS_STD_MAIN_KEYMAP
> + >;
> +};
> diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts
> new file mode 100644
> index 000000000000..447b57b12b41
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262148.dts
> @@ -0,0 +1,26 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright 2023 Google LLC
> + */
> +
> +#include "mt8186-corsola-tentacruel-sku262144.dts"
> +
> +/ {
> + compatible = "google,tentacruel-sku262151", "google,tentacruel-sku262150",
> + "google,tentacruel-sku262149", "google,tentacruel-sku262148",
> + "google,tentacruel", "mediatek,mt8186";
> +};
> +
> +/* This variant replaces only the trackpad controller. */
> +&i2c2 {
> + /delete-node/ trackpad@15;
> +
> + trackpad@15 {
> + compatible = "hid-over-i2c";
> + reg = <0x15>;
> + interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
> + hid-descr-addr = <0x0001>;
> + vdd-supply = <&pp3300_s3>;
> + wakeup-source;
> + };
> +};
> diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
> new file mode 100644
> index 000000000000..8726b2916ef1
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola.dtsi
> @@ -0,0 +1,1719 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright (C) 2022 MediaTek Inc.
> + */
> +/dts-v1/;
> +#include "mt8186.dtsi"
> +#include <dt-bindings/pinctrl/mt8186-pinfunc.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/input/gpio-keys.h>
> +#include <dt-bindings/regulator/mediatek,mt6397-regulator.h>
> +
> +/ {
> + aliases {
> + i2c0 = &i2c0;
> + i2c1 = &i2c1;
> + i2c2 = &i2c2;
> + i2c3 = &i2c3;
> + i2c5 = &i2c5;
> + mmc0 = &mmc0;
> + mmc1 = &mmc1;
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + memory@40000000 {
> + device_type = "memory";
> + /* The size should be filled in by the bootloader. */
> + reg = <0 0x40000000 0 0>;
> + };
> +
> + backlight_lcd0: backlight-lcd0 {
> + compatible = "pwm-backlight";
> + pwms = <&pwm0 0 500000>;
> + power-supply = <&ppvar_sys>;
> + enable-gpios = <&pio 152 0>;
> + brightness-levels = <0 1023>;
> + num-interpolated-steps = <1023>;
> + default-brightness-level = <576>;
> + };
> +
> + btsco: bt-sco {
> + compatible = "linux,bt-sco";
> + #sound-dai-cells = <0>;
> + };
> +
> + dmic_codec: dmic-codec {
> + compatible = "dmic-codec";
> + num-channels = <2>;
> + wakeup-delay-ms = <50>;
> + #sound-dai-cells = <0>;
> + };
> +
> + gpio_keys: gpio-keys {
> + compatible = "gpio-keys";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pen_eject>;
> +
> + pen_insert: pen-insert-switch {
> + label = "Pen Insert";
> + /* Insert = low, eject = high */
> + gpios = <&pio 18 GPIO_ACTIVE_LOW>;
> + linux,code = <SW_PEN_INSERTED>;
> + linux,input-type = <EV_SW>;
> + wakeup-event-action = <EV_ACT_DEASSERTED>;
> + wakeup-source;
> + };
> + };
> +
> + pp1800_dpbrdg_dx: regulator-pp1800-dpbrdg-dx {
> + compatible = "regulator-fixed";
> + pinctrl-names = "default";
> + pinctrl-0 = <&en_pp1800_dpbrdg>;
> + regulator-name = "pp1800_dpbrdg_dx";
> + enable-active-high;
> + gpio = <&pio 39 GPIO_ACTIVE_HIGH>;
> + vin-supply = <&mt6366_vio18_reg>;
> + };
> +
> + pp3300_disp_x: regulator-pp3300-disp-x {
> + compatible = "regulator-fixed";
> + regulator-name = "pp3300_disp_x";
> + pinctrl-names = "default";
> + pinctrl-0 = <&edp_panel_fixed_pins>;
> + enable-active-high;
> + regulator-boot-on;
> + gpio = <&pio 153 GPIO_ACTIVE_HIGH>;
> + vin-supply = <&pp3300_z2>;
> + };
> +
> + /* system wide LDO 3.3V power rail */
> + pp3300_z5: regulator-pp3300-ldo-z5 {
> + compatible = "regulator-fixed";
> + regulator-name = "pp3300_ldo_z5";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + vin-supply = <&ppvar_sys>;
> + };
> +
> + /* separately switched 3.3V power rail */
> + pp3300_s3: regulator-pp3300-s3 {
> + compatible = "regulator-fixed";
> + regulator-name = "pp3300_s3";
> + /* automatically sequenced by PMIC EXT_PMIC_EN2 */
> + regulator-always-on;
> + regulator-boot-on;
> + vin-supply = <&pp3300_z2>;
> + };
> +
> + /* system wide 3.3V power rail */
> + pp3300_z2: regulator-pp3300-z2 {
> + compatible = "regulator-fixed";
> + regulator-name = "pp3300_z2";
> + /* EN pin tied to pp4200_z2, which is controlled by EC */
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + vin-supply = <&ppvar_sys>;
> + };
> +
> + /* system wide 4.2V power rail */
> + pp4200_z2: regulator-pp4200-z2 {
> + compatible = "regulator-fixed";
> + regulator-name = "pp4200_z2";
> + /* controlled by EC */
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <4200000>;
> + regulator-max-microvolt = <4200000>;
> + vin-supply = <&ppvar_sys>;
> + };
> +
> + /* system wide switching 5.0V power rail */
> + pp5000_z2: regulator-pp5000-z2 {
> + compatible = "regulator-fixed";
> + regulator-name = "pp5000_z2";
> + /* controlled by EC */
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + vin-supply = <&ppvar_sys>;
> + };
> +
> + /* system wide semi-regulated power rail from battery or USB */
> + ppvar_sys: regulator-ppvar-sys {
> + compatible = "regulator-fixed";
> + regulator-name = "ppvar_sys";
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + reserved_memory: reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + adsp_dma_mem: memory@61000000 {
> + compatible = "shared-dma-pool";
> + reg = <0 0x61000000 0 0x100000>;
> + no-map;
> + };
> +
> + adsp_mem: memory@60000000 {
> + compatible = "shared-dma-pool";
> + reg = <0 0x60000000 0 0xA00000>;
> + no-map;
> + };
> +
> + scp_mem: memory@50000000 {
> + compatible = "shared-dma-pool";
> + reg = <0 0x50000000 0 0x10a0000>;
> + no-map;
> + };
> + };
> +
> + sound: sound {
> + compatible = "mediatek,mt8186-mt6366-rt1019-rt5682s-sound";
> + pinctrl-names = "aud_clk_mosi_off",
> + "aud_clk_mosi_on",
> + "aud_clk_miso_off",
> + "aud_clk_miso_on",
> + "aud_dat_miso_off",
> + "aud_dat_miso_on",
> + "aud_dat_mosi_off",
> + "aud_dat_mosi_on",
> + "aud_gpio_i2s0_off",
> + "aud_gpio_i2s0_on",
> + "aud_gpio_i2s1_off",
> + "aud_gpio_i2s1_on",
> + "aud_gpio_i2s2_off",
> + "aud_gpio_i2s2_on",
> + "aud_gpio_i2s3_off",
> + "aud_gpio_i2s3_on",
> + "aud_gpio_tdm_off",
> + "aud_gpio_tdm_on",
> + "aud_gpio_pcm_off",
> + "aud_gpio_pcm_on",
> + "aud_gpio_dmic_sec";
> + pinctrl-0 = <&aud_clk_mosi_off>;
> + pinctrl-1 = <&aud_clk_mosi_on>;
> + pinctrl-2 = <&aud_clk_miso_off>;
> + pinctrl-3 = <&aud_clk_miso_on>;
> + pinctrl-4 = <&aud_dat_miso_off>;
> + pinctrl-5 = <&aud_dat_miso_on>;
> + pinctrl-6 = <&aud_dat_mosi_off>;
> + pinctrl-7 = <&aud_dat_mosi_on>;
> + pinctrl-8 = <&aud_gpio_i2s0_off>;
> + pinctrl-9 = <&aud_gpio_i2s0_on>;
> + pinctrl-10 = <&aud_gpio_i2s1_off>;
> + pinctrl-11 = <&aud_gpio_i2s1_on>;
> + pinctrl-12 = <&aud_gpio_i2s2_off>;
> + pinctrl-13 = <&aud_gpio_i2s2_on>;
> + pinctrl-14 = <&aud_gpio_i2s3_off>;
> + pinctrl-15 = <&aud_gpio_i2s3_on>;
> + pinctrl-16 = <&aud_gpio_tdm_off>;
> + pinctrl-17 = <&aud_gpio_tdm_on>;
These two above bring errors, as discussed
> + pinctrl-18 = <&aud_gpio_pcm_off>;
> + pinctrl-19 = <&aud_gpio_pcm_on>;
> + pinctrl-20 = <&aud_gpio_dmic_sec>;
> + mediatek,adsp = <&adsp>;
> + mediatek,platform = <&afe>;
> +
> + playback-codecs {
> + sound-dai = <&it6505dptx>, <&rt1019p>;
> + };
> +
> + headset-codec {
> + sound-dai = <&rt5682s 0>;
> + };
> + };
> +
> + rt1019p: speaker-codec {
> + compatible = "realtek,rt1019p";
> + pinctrl-names = "default";
> + pinctrl-0 = <&rt1019p_pins_default>;
> + sdb-gpios = <&pio 150 GPIO_ACTIVE_HIGH>;
> + #sound-dai-cells = <0>;
> + };
> +
> + usb_p1_vbus: regulator-usb-p1-vbus {
> + compatible = "regulator-fixed";
> + regulator-name = "vbus1";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + enable-active-high;
> + gpio = <&pio 148 GPIO_ACTIVE_HIGH>;
> + vin-supply = <&pp5000_z2>;
> + };
> +
> + wifi_pwrseq: wifi-pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + pinctrl-names = "default";
> + pinctrl-0 = <&wifi_enable_pin>;
> + post-power-on-delay-ms = <50>;
> + reset-gpios = <&pio 54 GPIO_ACTIVE_LOW>;
> + };
> +
> + wifi_wakeup: wifi-wakeup {
> + compatible = "gpio-keys";
> + pinctrl-names = "default";
> + pinctrl-0 = <&wifi_wakeup_pin>;
> +
> + wowlan-event {
> + label = "Wake on WiFi";
> + gpios = <&pio 7 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_WAKEUP>;
> + wakeup-source;
> + };
> + };
> +};
> +
> +&adsp {
> + memory-region = <&adsp_dma_mem>, <&adsp_mem>;
> + status = "disabled"; /* causes stall */
> +};
> +
> +&afe {
> + i2s0-share = "I2S1";
> + i2s3-share = "I2S2";
These i2sX-share are not documented.
> + status = "okay";
> +};
> +
> +&cci {
> + proc-supply = <&mt6366_vproc12_reg>;
> +};
> +
> +&cpu0 {
> + proc-supply = <&mt6366_vproc12_reg>;
> +};
> +
> +&cpu1 {
> + proc-supply = <&mt6366_vproc12_reg>;
> +};
> +
> +&cpu2 {
> + proc-supply = <&mt6366_vproc12_reg>;
> +};
> +
> +&cpu3 {
> + proc-supply = <&mt6366_vproc12_reg>;
> +};
> +
> +&cpu4 {
> + proc-supply = <&mt6366_vproc12_reg>;
> +};
> +
> +&cpu5 {
> + proc-supply = <&mt6366_vproc12_reg>;
> +};
> +
> +&cpu6 {
> + proc-supply = <&mt6366_vproc11_reg>;
> +};
> +
> +&cpu7 {
> + proc-supply = <&mt6366_vproc11_reg>;
> +};
> +
> +&dpi {
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&dpi_pins_default>;
> + pinctrl-1 = <&dpi_pins_sleep>;
> + status = "okay";
> +};
> +
> +&dpi_out {
> + remote-endpoint = <&it6505_in>;
> +};
> +
> +&dsi0 {
> + status = "okay";
> +};
> +
> +&gic {
> + mediatek,broken-save-restore-fw;
> +};
> +
> +&gpu {
> + mali-supply = <&mt6366_vgpu_reg>;
> + status = "okay";
> +};
> +
> +&i2c0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c0_pins>;
> + status = "okay";
> +};
> +
> +&i2c1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c1_pins>;
> + clock-frequency = <400000>;
> + i2c-scl-internal-delay-ns = <8000>;
> + status = "okay";
> +};
> +
> +&i2c2 {
> + pinctrl-names = "default";
> + /*
> + * Trackpad pin put here to work around second source components
> + * sharing the pinmux in steelix designs.
> + */
> + pinctrl-0 = <&i2c2_pins>, <&trackpad_pin>;
While this makes things better, it's not correct. The i2c2 bus does not use the
trackpad pin. I would believe a better way is to have a node that holds both
trackpads and claims the pin for both at once. And that node not being the i2c bus
as there could be more devices on the bus and the pin would be taken regardless of
any trackpad probing , which is not right.
Another option is to disable parallel probing for the trackpads, such that when one
fails to probe, the pin is released and can be taken by the other one.
> + clock-frequency = <400000>;
> + i2c-scl-internal-delay-ns = <10000>;
> + status = "okay";
> +
> + trackpad@15 {
> + compatible = "elan,ekth3000";
> + reg = <0x15>;
> + interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
> + vcc-supply = <&pp3300_s3>;
> + wakeup-source;
> + };
> +};
> +
> +&i2c3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c3_pins>;
> + clock-frequency = <100000>;
> + status = "okay";
> +
> + it6505dptx: dp-bridge@5c {
> + compatible = "ite,it6505";
> + reg = <0x5c>;
> + interrupts-extended = <&pio 8 IRQ_TYPE_LEVEL_LOW>;
> + ovdd-supply = <&mt6366_vsim2_reg>;
> + pwr18-supply = <&pp1800_dpbrdg_dx>;
> + reset-gpios = <&pio 177 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&it6505_pins>;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #sound-dai-cells = <0>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + it6505_in: endpoint {
> + link-frequencies = /bits/ 64 <150000000>;
> + remote-endpoint = <&dpi_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + };
> + };
> + };
> +};
> +
> +&i2c5 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c5_pins>;
> + status = "okay";
> +
> + rt5682s: codec@1a {
> + compatible = "realtek,rt5682s";
> + reg = <0x1a>;
> + interrupts-extended = <&pio 17 IRQ_TYPE_EDGE_BOTH>;
> + AVDD-supply = <&mt6366_vio18_reg>;
> + DBVDD-supply = <&mt6366_vio18_reg>;
> + LDO1-IN-supply = <&mt6366_vio18_reg>;
> + MICVDD-supply = <&pp3300_z2>;
> + realtek,jd-src = <1>;
> + #sound-dai-cells = <1>;
> + };
> +};
> +
> +&mfg0 {
> + domain-supply = <&mt6366_vsram_gpu_reg>;
> +};
> +
> +&mfg1 {
> + domain-supply = <&mt6366_vgpu_reg>;
> +};
> +
> +&mipi_tx0 {
> + status = "okay";
> +};
> +
> +&mmc0 {
> + pinctrl-names = "default", "state_uhs";
> + pinctrl-0 = <&mmc0_pins_default>;
> + pinctrl-1 = <&mmc0_pins_uhs>;
> + bus-width = <8>;
> + max-frequency = <200000000>;
> + non-removable;
> + cap-mmc-highspeed;
> + mmc-hs200-1_8v;
> + mmc-hs400-1_8v;
> + supports-cqe;
> + no-sd;
> + no-sdio;
> + cap-mmc-hw-reset;
> + hs400-ds-delay = <0x11814>;
> + mediatek,hs400-ds-dly3 = <0x14>;
> + vmmc-supply = <&mt6366_vemc_reg>;
> + vqmmc-supply = <&mt6366_vio18_reg>;
> + status = "okay";
> +};
> +
> +&mmc1 {
> + pinctrl-names = "default", "state_uhs", "state_eint";
> + pinctrl-0 = <&mmc1_pins_default>;
> + pinctrl-1 = <&mmc1_pins_uhs>;
> + pinctrl-2 = <&mmc1_pins_eint>;
> + /delete-property/ interrupts;
> + interrupt-names = "msdc", "sdio_wakeup";
> + interrupts-extended = <&gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH 0>,
> + <&pio 87 IRQ_TYPE_LEVEL_LOW>;
> + bus-width = <4>;
> + max-frequency = <200000000>;
> + cap-sd-highspeed;
> + sd-uhs-sdr104;
> + sd-uhs-sdr50;
> + keep-power-in-suspend;
> + wakeup-source;
> + cap-sdio-irq;
> + no-mmc;
> + no-sd;
> + non-removable;
> + vmmc-supply = <&pp3300_s3>;
> + vqmmc-supply = <&mt6366_vio18_reg>;
> + mmc-pwrseq = <&wifi_pwrseq>;
> + status = "okay";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + bluetooth@2 {
> + compatible = "mediatek,mt7921s-bluetooth";
> + reg = <2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&bt_pins_reset>;
> + reset-gpios = <&pio 155 GPIO_ACTIVE_LOW>;
> + };
> +};
> +
> +&nor_flash {
> + pinctrl-names = "default";
> + pinctrl-0 = <&nor_pins_default>;
> + assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D7_D4>;
> + status = "okay";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + flash@0 {
> + compatible = "jedec,spi-nor";
> + reg = <0>;
> + spi-max-frequency = <39000000>;
> + };
> +};
> +
> +&pio {
> + /* 185 lines */
> + gpio-line-names = "TP",
> + "TP",
> + "TP",
> + "I2S0_HP_DI",
> + "I2S3_DP_SPKR_DO",
> + "SAR_INT_ODL",
> + "BT_WAKE_AP_ODL",
> + "WIFI_INT_ODL",
> + "DPBRDG_INT_ODL",
> + "EDPBRDG_INT_ODL",
> + "EC_AP_HPD_OD",
> + "TCHPAD_INT_ODL",
> + "TCHSCR_INT_1V8_ODL",
> + "EC_AP_INT_ODL",
> + "EC_IN_RW_ODL",
> + "GSC_AP_INT_ODL",
> + /* AP_FLASH_WP_L is crossystem ABI. Rev1 schematics call it AP_WP_ODL. */
> + "AP_FLASH_WP_L",
> + "HP_INT_ODL",
> + "PEN_EJECT_OD",
> + "WCAM_PWDN_L",
> + "WCAM_RST_L",
> + "UCAM_SEN_EN",
> + "UCAM_RST_L",
> + "LTE_RESET_L",
> + "LTE_SAR_DETECT_L",
> + "I2S2_DP_SPK_MCK",
> + "I2S2_DP_SPKR_BCK",
> + "I2S2_DP_SPKR_LRCK",
> + "I2S2_DP_SPKR_DI (TP)",
> + "EN_PP1000_EDPBRDG",
> + "EN_PP1800_EDPBRDG",
> + "EN_PP3300_EDPBRDG",
> + "UART_GSC_TX_AP_RX",
> + "UART_AP_TX_GSC_RX",
> + "UART_DBGCON_TX_ADSP_RX",
> + "UART_ADSP_TX_DBGCON_RX",
> + "EN_PP1000_DPBRDG",
> + "TCHSCR_REPORT_DISABLE",
> + "EN_PP3300_DPBRDG",
> + "EN_PP1800_DPBRDG",
> + "SPI_AP_CLK_EC",
> + "SPI_AP_CS_EC_L",
> + "SPI_AP_DO_EC_DI",
> + "SPI_AP_DI_EC_DO",
> + "SPI_AP_CLK_GSC",
> + "SPI_AP_CS_GSC_L",
> + "SPI_AP_DO_GSC_DI",
> + "SPI_AP_DI_GSC_DO",
> + "UART_DBGCON_TX_SCP_RX",
> + "UART_SCP_TX_DBGCON_RX",
> + "EN_PP1200_CAM_X",
> + "EN_PP2800A_VCM_X",
> + "EN_PP2800A_UCAM_X",
> + "EN_PP2800A_WCAM_X",
> + "WLAN_MODULE_RST_L",
> + "EN_PP1200_UCAM_X",
> + "I2S1_HP_DO",
> + "I2S1_HP_BCK",
> + "I2S1_HP_LRCK",
> + "I2S1_HP_MCK",
> + "TCHSCR_RST_1V8_L",
> + "SPI_AP_CLK_ROM",
> + "SPI_AP_CS_ROM_L",
> + "SPI_AP_DO_ROM_DI",
> + "SPI_AP_DI_ROM_DO",
> + "NC",
> + "NC",
> + "EMMC_STRB",
> + "EMMC_CLK",
> + "EMMC_CMD",
> + "EMMC_RST_L",
> + "EMMC_DATA0",
> + "EMMC_DATA1",
> + "EMMC_DATA2",
> + "EMMC_DATA3",
> + "EMMC_DATA4",
> + "EMMC_DATA5",
> + "EMMC_DATA6",
> + "EMMC_DATA7",
> + "AP_KPCOL0",
> + "NC",
> + "NC",
> + "NC",
> + "TP",
> + "SDIO_CLK",
> + "SDIO_CMD",
> + "SDIO_DATA0",
> + "SDIO_DATA1",
> + "SDIO_DATA2",
> + "SDIO_DATA3",
> + "NC",
> + "NC",
> + "NC",
> + "NC",
> + "NC",
> + "NC",
> + "EDPBRDG_PWREN",
> + "BL_PWM_1V8",
> + "EDPBRDG_RST_L",
> + "MIPI_DPI_CLK",
> + "MIPI_DPI_VSYNC",
> + "MIPI_DPI_HSYNC",
> + "MIPI_DPI_DE",
> + "MIPI_DPI_D0",
> + "MIPI_DPI_D1",
> + "MIPI_DPI_D2",
> + "MIPI_DPI_D3",
> + "MIPI_DPI_D4",
> + "MIPI_DPI_D5",
> + "MIPI_DPI_D6",
> + "MIPI_DPI_DA7",
> + "MIPI_DPI_D8",
> + "MIPI_DPI_D9",
> + "MIPI_DPI_D10",
> + "MIPI_DPI_D11",
> + "PCM_BT_CLK",
> + "PCM_BT_SYNC",
> + "PCM_BT_DI",
> + "PCM_BT_DO",
> + "JTAG_TMS_TP",
> + "JTAG_TCK_TP",
> + "JTAG_TDI_TP",
> + "JTAG_TDO_TP",
> + "JTAG_TRSTN_TP",
> + "CLK_24M_WCAM",
> + "CLK_24M_UCAM",
> + "UCAM_DET_ODL",
> + "AP_I2C_EDPBRDG_SCL_1V8",
> + "AP_I2C_EDPBRDG_SDA_1V8",
> + "AP_I2C_TCHSCR_SCL_1V8",
> + "AP_I2C_TCHSCR_SDA_1V8",
> + "AP_I2C_TCHPAD_SCL_1V8",
> + "AP_I2C_TCHPAD_SDA_1V8",
> + "AP_I2C_DPBRDG_SCL_1V8",
> + "AP_I2C_DPBRDG_SDA_1V8",
> + "AP_I2C_WLAN_SCL_1V8",
> + "AP_I2C_WLAN_SDA_1V8",
> + "AP_I2C_AUD_SCL_1V8",
> + "AP_I2C_AUD_SDA_1V8",
> + "AP_I2C_TPM_SCL_1V8",
> + "AP_I2C_UCAM_SDA_1V8",
> + "AP_I2C_UCAM_SCL_1V8",
> + "AP_I2C_UCAM_SDA_1V8",
> + "AP_I2C_WCAM_SCL_1V8",
> + "AP_I2C_WCAM_SDA_1V8",
> + "SCP_I2C_SENSOR_SCL_1V8",
> + "SCP_I2C_SENSOR_SDA_1V8",
> + "AP_EC_WARM_RST_REQ",
> + "AP_XHCI_INIT_DONE",
> + "USB3_HUB_RST_L",
> + "EN_SPKR",
> + "BEEP_ON",
> + "AP_EDP_BKLTEN",
> + "EN_PP3300_DISP_X",
> + "EN_PP3300_SDBRDG_X",
> + "BT_KILL_1V8_L",
> + "WIFI_KILL_1V8_L",
> + "PWRAP_SPI0_CSN",
> + "PWRAP_SPI0_CK",
> + "PWRAP_SPI0_MO",
> + "PWRAP_SPI0_MI",
> + "SRCLKENA0",
> + "SRCLKENA1",
> + "SCP_VREQ_VAO",
> + "AP_RTC_CLK32K",
> + "AP_PMIC_WDTRST_L",
> + "AUD_CLK_MOSI",
> + "AUD_SYNC_MOSI",
> + "AUD_DAT_MOSI0",
> + "AUD_DAT_MOSI1",
> + "AUD_CLK_MISO",
> + "AUD_SYNC_MISO",
> + "AUD_DAT_MISO0",
> + "AUD_DAT_MISO1",
> + "NC",
> + "NC",
> + "DPBRDG_PWREN",
> + "DPBRDG_RST_L",
> + "LTE_W_DISABLE_L",
> + "LTE_SAR_DETECT_L",
> + "EN_PP3300_LTE_X",
> + "LTE_PWR_OFF_L",
> + "LTE_RESET_L",
> + "TP",
> + "TP";
> +
> + aud_clk_mosi_off: aud-clk-mosi-off-pins {
> + pins-clk-sync {
> + pinmux = <PINMUX_GPIO166__FUNC_GPIO166>,
> + <PINMUX_GPIO167__FUNC_GPIO167>;
> + input-enable;
> + bias-pull-down;
> + };
> + };
> +
> + aud_clk_mosi_on: aud-clk-mosi-on-pins {
> + pins-clk-sync {
> + pinmux = <PINMUX_GPIO166__FUNC_AUD_CLK_MOSI>,
> + <PINMUX_GPIO167__FUNC_AUD_SYNC_MOSI>;
> + };
> + };
> +
> + aud_clk_miso_off: aud-clk-miso-off-pins {
> + pins-clk-sync {
> + pinmux = <PINMUX_GPIO170__FUNC_GPIO170>,
> + <PINMUX_GPIO171__FUNC_GPIO171>;
> + input-enable;
> + bias-pull-down;
> + };
> + };
> +
> + aud_clk_miso_on: aud-clk-miso-on-pins {
> + pins-clk-sync {
> + pinmux = <PINMUX_GPIO170__FUNC_AUD_CLK_MISO>,
> + <PINMUX_GPIO171__FUNC_AUD_SYNC_MISO>;
> + };
> + };
> +
> + aud_dat_mosi_off: aud-dat-mosi-off-pins {
> + pins-dat {
> + pinmux = <PINMUX_GPIO168__FUNC_GPIO168>,
> + <PINMUX_GPIO169__FUNC_GPIO169>;
> + input-enable;
> + bias-pull-down;
> + };
> + };
> +
> + aud_dat_mosi_on: aud-dat-mosi-on-pins {
> + pins-dat {
> + pinmux = <PINMUX_GPIO168__FUNC_AUD_DAT_MOSI0>,
> + <PINMUX_GPIO169__FUNC_AUD_DAT_MOSI1>;
> + };
> + };
> +
> + aud_dat_miso_off: aud-dat-miso-off-pins {
> + pins-dat {
> + pinmux = <PINMUX_GPIO172__FUNC_GPIO172>,
> + <PINMUX_GPIO173__FUNC_GPIO173>;
> + input-enable;
> + bias-pull-down;
> + };
> + };
> +
> + aud_dat_miso_on: aud-dat-miso-on-pins {
> + pins-dat {
> + pinmux = <PINMUX_GPIO172__FUNC_AUD_DAT_MISO0>,
> + <PINMUX_GPIO173__FUNC_AUD_DAT_MISO1>;
> + input-schmitt-enable;
> + bias-disable;
> + };
> + };
> +
> + aud_gpio_i2s0_off: aud-gpio-i2s0-off-pins {
> + pins-sdata {
> + pinmux = <PINMUX_GPIO3__FUNC_GPIO3>;
> + };
> + };
> +
> + aud_gpio_i2s0_on: aud-gpio-i2s0-on-pins {
> + pins-sdata {
> + pinmux = <PINMUX_GPIO3__FUNC_I2S0_DI>;
> + };
> + };
> +
> + aud_gpio_i2s1_off: aud-gpio-i2s-off-pins {
> + pins-clk-sdata {
> + pinmux = <PINMUX_GPIO56__FUNC_GPIO56>,
> + <PINMUX_GPIO57__FUNC_GPIO57>,
> + <PINMUX_GPIO58__FUNC_GPIO58>,
> + <PINMUX_GPIO59__FUNC_GPIO59>;
> + output-low;
> + };
> + };
> +
> + aud_gpio_i2s1_on: aud-gpio-i2s1-on-pins {
> + pins-clk-sdata {
> + pinmux = <PINMUX_GPIO56__FUNC_I2S1_DO>,
> + <PINMUX_GPIO57__FUNC_I2S1_BCK>,
> + <PINMUX_GPIO58__FUNC_I2S1_LRCK>,
> + <PINMUX_GPIO59__FUNC_I2S1_MCK>;
> + };
> + };
> +
> + aud_gpio_i2s2_off: aud-gpio-i2s2-off-pins {
> + pins-cmd-dat {
> + pinmux = <PINMUX_GPIO26__FUNC_GPIO26>,
> + <PINMUX_GPIO27__FUNC_GPIO27>;
> + output-low;
> + };
> + };
> +
> + aud_gpio_i2s2_on: aud-gpio-i2s2-on-pins {
> + pins-clk {
> + pinmux = <PINMUX_GPIO26__FUNC_I2S2_BCK>,
> + <PINMUX_GPIO27__FUNC_I2S2_LRCK>;
> + drive-strength = <4>;
> + };
> + };
> +
> + aud_gpio_i2s3_off: aud-gpio-i2s3-off-pins {
> + pins-sdata {
> + pinmux = <PINMUX_GPIO4__FUNC_GPIO4>;
> + output-low;
> + };
> + };
> +
> + aud_gpio_i2s3_on: aud-gpio-i2s3-on-pins {
> + pins-sdata {
> + pinmux = <PINMUX_GPIO4__FUNC_I2S3_DO>;
> + drive-strength = <4>;
> + };
> + };
> +
> + aud_gpio_tdm_off: aud-gpio-tdm-off-pins { };
> +
> + aud_gpio_tdm_on: aud-gpio-tdm-on-pins { };
Guess have to remove these two empty pinctrls.
> +
> + aud_gpio_pcm_off: aud-gpio-pcm-off-pins {
> + pins-clk-sdata {
> + pinmux = <PINMUX_GPIO115__FUNC_GPIO115>,
> + <PINMUX_GPIO116__FUNC_GPIO116>,
> + <PINMUX_GPIO117__FUNC_GPIO117>,
> + <PINMUX_GPIO118__FUNC_GPIO118>;
> + output-low;
> + };
> + };
> +
> + aud_gpio_pcm_on: aud-gpio-pcm-on-pins {
> + pins-clk-sdata {
> + pinmux = <PINMUX_GPIO115__FUNC_PCM_CLK>,
> + <PINMUX_GPIO116__FUNC_PCM_SYNC>,
> + <PINMUX_GPIO117__FUNC_PCM_DI>,
> + <PINMUX_GPIO118__FUNC_PCM_DO>;
> + };
> + };
> +
> + aud_gpio_dmic_sec: aud-gpio-dmic-sec-pins {
> + pins {
> + pinmux = <PINMUX_GPIO23__FUNC_GPIO23>;
> + output-low;
> + };
> + };
> +
> + bt_pins_reset: bt-reset-pins {
> + pins-bt-reset {
> + pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
> + output-high;
> + };
> + };
> +
> + dpi_pins_sleep: dpi-sleep-pins {
> + pins-cmd-dat {
> + pinmux = <PINMUX_GPIO103__FUNC_GPIO103>,
> + <PINMUX_GPIO104__FUNC_GPIO104>,
> + <PINMUX_GPIO105__FUNC_GPIO105>,
> + <PINMUX_GPIO106__FUNC_GPIO106>,
> + <PINMUX_GPIO107__FUNC_GPIO107>,
> + <PINMUX_GPIO108__FUNC_GPIO108>,
> + <PINMUX_GPIO109__FUNC_GPIO109>,
> + <PINMUX_GPIO110__FUNC_GPIO110>,
> + <PINMUX_GPIO111__FUNC_GPIO111>,
> + <PINMUX_GPIO112__FUNC_GPIO112>,
> + <PINMUX_GPIO113__FUNC_GPIO113>,
> + <PINMUX_GPIO114__FUNC_GPIO114>,
> + <PINMUX_GPIO101__FUNC_GPIO101>,
> + <PINMUX_GPIO100__FUNC_GPIO100>,
> + <PINMUX_GPIO102__FUNC_GPIO102>,
> + <PINMUX_GPIO99__FUNC_GPIO99>;
> + drive-strength = <10>;
> + output-low;
> + };
> + };
> +
> + dpi_pins_default: dpi-default-pins {
> + pins-cmd-dat {
> + pinmux = <PINMUX_GPIO103__FUNC_DPI_DATA0>,
> + <PINMUX_GPIO104__FUNC_DPI_DATA1>,
> + <PINMUX_GPIO105__FUNC_DPI_DATA2>,
> + <PINMUX_GPIO106__FUNC_DPI_DATA3>,
> + <PINMUX_GPIO107__FUNC_DPI_DATA4>,
> + <PINMUX_GPIO108__FUNC_DPI_DATA5>,
> + <PINMUX_GPIO109__FUNC_DPI_DATA6>,
> + <PINMUX_GPIO110__FUNC_DPI_DATA7>,
> + <PINMUX_GPIO111__FUNC_DPI_DATA8>,
> + <PINMUX_GPIO112__FUNC_DPI_DATA9>,
> + <PINMUX_GPIO113__FUNC_DPI_DATA10>,
> + <PINMUX_GPIO114__FUNC_DPI_DATA11>,
> + <PINMUX_GPIO101__FUNC_DPI_HSYNC>,
> + <PINMUX_GPIO100__FUNC_DPI_VSYNC>,
> + <PINMUX_GPIO102__FUNC_DPI_DE>,
> + <PINMUX_GPIO99__FUNC_DPI_PCLK>;
> + drive-strength = <10>;
> + };
> + };
> +
> + ec_ap_int: cros-ec-int-pins {
> + pins-ec-ap-int-odl {
> + pinmux = <PINMUX_GPIO13__FUNC_GPIO13>;
> + input-enable;
> + };
> + };
> +
> + edp_panel_fixed_pins: edp-panel-fixed-pins {
> + pins-vreg-en {
> + pinmux = <PINMUX_GPIO153__FUNC_GPIO153>;
> + output-high;
> + };
> + };
> +
> + en_pp1800_dpbrdg: en-pp1800-dpbrdg-pins {
> + pins-vreg-en {
> + pinmux = <PINMUX_GPIO39__FUNC_GPIO39>;
> + output-low;
> + };
> + };
> +
> + gsc_int: gsc-int-pins {
> + pins-gsc-ap-int-odl {
> + pinmux = <PINMUX_GPIO15__FUNC_GPIO15>;
> + input-enable;
> + };
> + };
> +
> + i2c0_pins: i2c0-pins {
> + pins-bus {
> + pinmux = <PINMUX_GPIO128__FUNC_SDA0>,
> + <PINMUX_GPIO127__FUNC_SCL0>;
> + bias-disable;
> + drive-strength = <4>;
> + input-enable;
> + };
> + };
> +
> + i2c1_pins: i2c1-pins {
> + pins-bus {
> + pinmux = <PINMUX_GPIO130__FUNC_SDA1>,
> + <PINMUX_GPIO129__FUNC_SCL1>;
> + bias-disable;
> + drive-strength = <4>;
> + input-enable;
> + };
> + };
> +
> + i2c2_pins: i2c2-pins {
> + pins-bus {
> + pinmux = <PINMUX_GPIO132__FUNC_SDA2>,
> + <PINMUX_GPIO131__FUNC_SCL2>;
> + bias-disable;
> + drive-strength = <4>;
> + input-enable;
> + };
> + };
> +
> + i2c3_pins: i2c3-pins {
> + pins-bus {
> + pinmux = <PINMUX_GPIO134__FUNC_SDA3>,
> + <PINMUX_GPIO133__FUNC_SCL3>;
> + bias-disable;
> + drive-strength = <4>;
> + input-enable;
> + };
> + };
> +
> + i2c5_pins: i2c5-pins {
> + pins-bus {
> + pinmux = <PINMUX_GPIO138__FUNC_SDA5>,
> + <PINMUX_GPIO137__FUNC_SCL5>;
> + bias-disable;
> + drive-strength = <4>;
> + input-enable;
> + };
> + };
> +
> + it6505_pins: it6505-pins {
> + pins-hpd {
> + pinmux = <PINMUX_GPIO10__FUNC_GPIO10>;
> + input-enable;
> + bias-pull-up;
> + };
> +
> + pins-int {
> + pinmux = <PINMUX_GPIO8__FUNC_GPIO8>;
> + input-enable;
> + bias-pull-up;
> + };
> +
> + pins-reset {
> + pinmux = <PINMUX_GPIO177__FUNC_GPIO177>;
> + output-low;
> + bias-pull-up;
> + };
> + };
> +
> + mmc0_pins_default: mmc0-default-pins {
> + pins-clk {
> + pinmux = <PINMUX_GPIO68__FUNC_MSDC0_CLK>;
> + bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
> + };
> +
> + pins-cmd-dat {
> + pinmux = <PINMUX_GPIO71__FUNC_MSDC0_DAT0>,
> + <PINMUX_GPIO72__FUNC_MSDC0_DAT1>,
> + <PINMUX_GPIO73__FUNC_MSDC0_DAT2>,
> + <PINMUX_GPIO74__FUNC_MSDC0_DAT3>,
> + <PINMUX_GPIO75__FUNC_MSDC0_DAT4>,
> + <PINMUX_GPIO76__FUNC_MSDC0_DAT5>,
> + <PINMUX_GPIO77__FUNC_MSDC0_DAT6>,
> + <PINMUX_GPIO78__FUNC_MSDC0_DAT7>,
> + <PINMUX_GPIO69__FUNC_MSDC0_CMD>;
> + input-enable;
> + bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
> + };
> +
> + pins-rst {
> + pinmux = <PINMUX_GPIO70__FUNC_MSDC0_RSTB>;
> + bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
> + };
> + };
> +
> + mmc0_pins_uhs: mmc0-uhs-pins {
> + pins-clk {
> + pinmux = <PINMUX_GPIO68__FUNC_MSDC0_CLK>;
> + drive-strength = <6>;
> + bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
> + };
> +
> + pins-cmd-dat {
> + pinmux = <PINMUX_GPIO71__FUNC_MSDC0_DAT0>,
> + <PINMUX_GPIO72__FUNC_MSDC0_DAT1>,
> + <PINMUX_GPIO73__FUNC_MSDC0_DAT2>,
> + <PINMUX_GPIO74__FUNC_MSDC0_DAT3>,
> + <PINMUX_GPIO75__FUNC_MSDC0_DAT4>,
> + <PINMUX_GPIO76__FUNC_MSDC0_DAT5>,
> + <PINMUX_GPIO77__FUNC_MSDC0_DAT6>,
> + <PINMUX_GPIO78__FUNC_MSDC0_DAT7>,
> + <PINMUX_GPIO69__FUNC_MSDC0_CMD>;
> + input-enable;
> + drive-strength = <6>;
> + bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
> + };
> +
> + pins-ds {
> + pinmux = <PINMUX_GPIO67__FUNC_MSDC0_DSL>;
> + drive-strength = <6>;
> + bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
> + };
> +
> + pins-rst {
> + pinmux = <PINMUX_GPIO70__FUNC_MSDC0_RSTB>;
> + bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
> + };
> + };
> +
> + mmc1_pins_default: mmc1-default-pins {
> + pins-clk {
> + pinmux = <PINMUX_GPIO84__FUNC_MSDC1_CLK>;
> + drive-strength = <6>;
> + bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
> + };
> +
> + pins-cmd-dat {
> + pinmux = <PINMUX_GPIO86__FUNC_MSDC1_DAT0>,
> + <PINMUX_GPIO87__FUNC_MSDC1_DAT1>,
> + <PINMUX_GPIO88__FUNC_MSDC1_DAT2>,
> + <PINMUX_GPIO89__FUNC_MSDC1_DAT3>,
> + <PINMUX_GPIO85__FUNC_MSDC1_CMD>;
> + input-enable;
> + drive-strength = <6>;
> + bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
> + };
> + };
> +
> + mmc1_pins_uhs: mmc1-uhs-pins {
> + pins-clk {
> + pinmux = <PINMUX_GPIO84__FUNC_MSDC1_CLK>;
> + drive-strength = <6>;
> + bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
> + };
> +
> + pins-cmd-dat {
> + pinmux = <PINMUX_GPIO86__FUNC_MSDC1_DAT0>,
> + <PINMUX_GPIO87__FUNC_MSDC1_DAT1>,
> + <PINMUX_GPIO88__FUNC_MSDC1_DAT2>,
> + <PINMUX_GPIO89__FUNC_MSDC1_DAT3>,
> + <PINMUX_GPIO85__FUNC_MSDC1_CMD>;
> + input-enable;
> + drive-strength = <8>;
> + bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
> + };
> + };
> +
> + mmc1_pins_eint: mmc1-eint-pins {
> + pins-dat1 {
> + pinmux = <PINMUX_GPIO87__FUNC_GPIO87>;
> + input-enable;
> + bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
> + };
> + };
> +
> + nor_pins_default: nor-default-pins {
> + pins-clk-dat {
> + pinmux = <PINMUX_GPIO63__FUNC_SPINOR_IO0>,
> + <PINMUX_GPIO61__FUNC_SPINOR_CK>,
> + <PINMUX_GPIO64__FUNC_SPINOR_IO1>;
> + drive-strength = <6>;
> + bias-pull-down;
> + };
> +
> + pins-cs-dat {
> + pinmux = <PINMUX_GPIO62__FUNC_SPINOR_CS>,
> + <PINMUX_GPIO65__FUNC_SPINOR_IO2>,
> + <PINMUX_GPIO66__FUNC_SPINOR_IO3>;
> + drive-strength = <6>;
> + bias-pull-up;
> + };
> + };
> +
> + pen_eject: pen-eject-pins {
> + pins {
> + pinmux = <PINMUX_GPIO18__FUNC_GPIO18>;
> + input-enable;
> + /* External pull-up. */
> + bias-disable;
> + };
> + };
> +
> + pwm0_pin: disp-pwm-pins {
> + pins {
> + pinmux = <PINMUX_GPIO97__FUNC_DISP_PWM>;
> + output-high;
> + };
> + };
> +
> + rt1019p_pins_default: rt1019p-default-pins {
> + pins-sdb {
> + pinmux = <PINMUX_GPIO150__FUNC_GPIO150>;
> + output-low;
> + };
> + };
> +
> + scp_pins: scp-default-pins {
> + pins-scp-uart {
> + pinmux = <PINMUX_GPIO48__FUNC_TP_URXD2_AO>,
> + <PINMUX_GPIO49__FUNC_TP_UTXD2_AO>;
> + };
> + };
> +
> + spi1_pins: spi1-pins {
> + pins-bus {
> + pinmux = <PINMUX_GPIO40__FUNC_SPI1_CLK_A>,
> + <PINMUX_GPIO41__FUNC_SPI1_CSB_A>,
> + <PINMUX_GPIO42__FUNC_SPI1_MO_A>,
> + <PINMUX_GPIO43__FUNC_SPI1_MI_A>;
> + bias-disable;
> + input-enable;
> + };
> + };
> +
> + spi2_pins: spi2-pins {
> + pins-bus {
> + pinmux = <PINMUX_GPIO44__FUNC_SPI2_CLK_A>,
> + <PINMUX_GPIO45__FUNC_GPIO45>,
> + <PINMUX_GPIO46__FUNC_SPI2_MO_A>,
> + <PINMUX_GPIO47__FUNC_SPI2_MI_A>;
> + bias-disable;
> + input-enable;
> + };
> + };
> +
> + spmi_pins: spmi-pins {
> + pins-bus {
> + pinmux = <PINMUX_GPIO183__FUNC_SPMI_SCL>,
> + <PINMUX_GPIO184__FUNC_SPMI_SDA>;
> + };
> + };
> +
> + touchscreen_pins: touchscreen-pins {
> + pins-irq {
> + pinmux = <PINMUX_GPIO12__FUNC_GPIO12>;
> + input-enable;
> + bias-pull-up;
> + };
> +
> + pins-reset {
> + pinmux = <PINMUX_GPIO60__FUNC_GPIO60>;
> + output-high;
> + };
> +
> + pins-report-sw {
> + pinmux = <PINMUX_GPIO37__FUNC_GPIO37>;
> + output-low;
> + };
> + };
> +
> + trackpad_pin: trackpad-default-pins {
> + pins-int-n {
> + pinmux = <PINMUX_GPIO11__FUNC_GPIO11>;
> + input-enable;
> + bias-disable; /* pulled externally */
> + };
> + };
> +
> + wifi_enable_pin: wifi-enable-pins {
> + pins-wifi-enable {
> + pinmux = <PINMUX_GPIO54__FUNC_GPIO54>;
> + };
> + };
> +
> + wifi_wakeup_pin: wifi-wakeup-pins {
> + pins-wifi-wakeup {
> + pinmux = <PINMUX_GPIO7__FUNC_GPIO7>;
> + input-enable;
> + };
> + };
> +};
> +
> +&pwm0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pwm0_pin>;
> + status = "okay";
> +};
> +
> +&pwrap {
> + pmic {
> + compatible = "mediatek,mt6366", "mediatek,mt6358";
> + interrupt-controller;
> + interrupts-extended = <&pio 201 IRQ_TYPE_LEVEL_HIGH>;
> + #interrupt-cells = <2>;
> +
> + mt6366codec: codec {
> + compatible = "mediatek,mt6366-sound", "mediatek,mt6358-sound";
> + Avdd-supply = <&mt6366_vaud28_reg>;
> + mediatek,dmic-mode = <1>; /* one-wire */
> + };
> +
> + mt6366_regulators: regulators {
> + compatible = "mediatek,mt6366-regulator", "mediatek,mt6358-regulator";
> + vsys-ldo1-supply = <&pp4200_z2>;
> + vsys-ldo2-supply = <&pp4200_z2>;
> + vsys-ldo3-supply = <&pp4200_z2>;
> + vsys-vcore-supply = <&pp4200_z2>;
> + vsys-vdram1-supply = <&pp4200_z2>;
> + vsys-vgpu-supply = <&pp4200_z2>;
> + vsys-vmodem-supply = <&pp4200_z2>;
> + vsys-vpa-supply = <&pp4200_z2>;
> + vsys-vproc11-supply = <&pp4200_z2>;
> + vsys-vproc12-supply = <&pp4200_z2>;
> + vsys-vs1-supply = <&pp4200_z2>;
> + vsys-vs2-supply = <&pp4200_z2>;
> + vs1-ldo1-supply = <&mt6366_vs1_reg>;
> + vs2-ldo1-supply = <&mt6366_vdram1_reg>;
> + vs2-ldo2-supply = <&mt6366_vs2_reg>;
> + vs2-ldo3-supply = <&mt6366_vs2_reg>;
> +
> + vcore {
> + regulator-name = "pp0750_dvdd_core";
> + regulator-min-microvolt = <550000>;
> + regulator-max-microvolt = <800000>;
> + regulator-ramp-delay = <6250>;
> + regulator-enable-ramp-delay = <200>;
> + regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO
> + MT6397_BUCK_MODE_FORCE_PWM>;
> + regulator-always-on;
> + };
> +
> + mt6366_vdram1_reg: vdram1 {
> + regulator-name = "pp1125_emi_vdd2";
> + regulator-min-microvolt = <1125000>;
> + regulator-max-microvolt = <1125000>;
> + regulator-ramp-delay = <12500>;
> + regulator-enable-ramp-delay = <0>;
> + regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO
> + MT6397_BUCK_MODE_FORCE_PWM>;
> + regulator-always-on;
> + };
> +
> + mt6366_vgpu_reg: vgpu {
> + /*
> + * Called "ppvar_dvdd_gpu" in the schematic.
> + * Called "ppvar_dvdd_vgpu" here to match
> + * regulator coupling requirements.
> + */
> + regulator-name = "ppvar_dvdd_vgpu";
> + regulator-min-microvolt = <600000>;
> + regulator-max-microvolt = <950000>;
> + regulator-ramp-delay = <6250>;
> + regulator-enable-ramp-delay = <200>;
> + regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO
> + MT6397_BUCK_MODE_FORCE_PWM>;
> + regulator-coupled-with = <&mt6366_vsram_gpu_reg>;
> + regulator-coupled-max-spread = <10000>;
> + };
> +
> + mt6366_vproc11_reg: vproc11 {
> + regulator-name = "ppvar_dvdd_proc_bc_mt6366";
> + regulator-min-microvolt = <600000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-ramp-delay = <6250>;
> + regulator-enable-ramp-delay = <200>;
> + regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO
> + MT6397_BUCK_MODE_FORCE_PWM>;
> + regulator-always-on;
> + };
> +
> + mt6366_vproc12_reg: vproc12 {
> + regulator-name = "ppvar_dvdd_proc_lc";
> + regulator-min-microvolt = <600000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-ramp-delay = <6250>;
> + regulator-enable-ramp-delay = <200>;
> + regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO
> + MT6397_BUCK_MODE_FORCE_PWM>;
> + regulator-always-on;
> + };
> +
> + mt6366_vs1_reg: vs1 {
> + regulator-name = "pp2000_vs1";
> + regulator-min-microvolt = <2000000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-ramp-delay = <12500>;
> + regulator-enable-ramp-delay = <0>;
> + regulator-always-on;
> + };
> +
> + mt6366_vs2_reg: vs2 {
> + regulator-name = "pp1350_vs2";
> + regulator-min-microvolt = <1350000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-ramp-delay = <12500>;
> + regulator-enable-ramp-delay = <0>;
> + regulator-always-on;
> + };
> +
> + va12 {
> + regulator-name = "pp1200_va12";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-enable-ramp-delay = <270>;
> + regulator-always-on;
> + };
> +
> + mt6366_vaud28_reg: vaud28 {
> + regulator-name = "pp2800_vaud28";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-enable-ramp-delay = <270>;
> + };
> +
> + mt6366_vaux18_reg: vaux18 {
> + regulator-name = "pp1840_vaux18";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1840000>;
> + regulator-enable-ramp-delay = <270>;
> + };
> +
> + mt6366_vbif28_reg: vbif28 {
> + regulator-name = "pp2800_vbif28";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-enable-ramp-delay = <270>;
> + };
> +
> + mt6366_vcn18_reg: vcn18 {
> + regulator-name = "pp1800_vcn18_x";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-enable-ramp-delay = <270>;
> + };
> +
> + mt6366_vcn28_reg: vcn28 {
> + regulator-name = "pp2800_vcn28_x";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-enable-ramp-delay = <270>;
> + };
> +
> + mt6366_vefuse_reg: vefuse {
> + regulator-name = "pp1800_vefuse";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-enable-ramp-delay = <270>;
> + };
> +
> + mt6366_vfe28_reg: vfe28 {
> + regulator-name = "pp2800_vfe28_x";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-enable-ramp-delay = <270>;
> + };
> +
> + mt6366_vemc_reg: vemc {
> + regulator-name = "pp3000_vemc";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-enable-ramp-delay = <60>;
> + };
> +
> + mt6366_vibr_reg: vibr {
> + regulator-name = "pp2800_vibr_x";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-enable-ramp-delay = <60>;
> + };
> +
> + mt6366_vio18_reg: vio18 {
> + regulator-name = "pp1800_vio18_s3";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-enable-ramp-delay = <2700>;
> + regulator-always-on;
> + };
> +
> + mt6366_vio28_reg: vio28 {
> + regulator-name = "pp2800_vio28_x";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-enable-ramp-delay = <270>;
> + };
> +
> + mt6366_vm18_reg: vm18 {
> + regulator-name = "pp1800_emi_vdd1";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1840000>;
> + regulator-enable-ramp-delay = <325>;
> + regulator-always-on;
> + };
> +
> + mt6366_vmc_reg: vmc {
> + regulator-name = "pp3000_vmc";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-enable-ramp-delay = <60>;
> + };
> +
> + mt6366_vmddr_reg: vmddr {
> + regulator-name = "pm0750_emi_vmddr";
> + regulator-min-microvolt = <700000>;
> + regulator-max-microvolt = <750000>;
> + regulator-enable-ramp-delay = <325>;
> + regulator-always-on;
> + };
> +
> + mt6366_vmch_reg: vmch {
> + regulator-name = "pp3000_vmch";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-enable-ramp-delay = <60>;
> + };
> +
> + mt6366_vcn33_reg: vcn33 {
> + regulator-name = "pp3300_vcn33_x";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-enable-ramp-delay = <270>;
> + };
> +
> + vdram2 {
> + regulator-name = "pp0600_emi_vddq";
> + regulator-min-microvolt = <600000>;
> + regulator-max-microvolt = <600000>;
> + regulator-enable-ramp-delay = <3300>;
> + regulator-always-on;
> + };
> +
> + mt6366_vrf12_reg: vrf12 {
> + regulator-name = "pp1200_vrf12_x";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-enable-ramp-delay = <120>;
> + };
> +
> + mt6366_vrf18_reg: vrf18 {
> + regulator-name = "pp1800_vrf18_x";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-enable-ramp-delay = <120>;
> + };
> +
> + vsim1 {
> + regulator-name = "pp1860_vsim1_x";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1860000>;
> + regulator-enable-ramp-delay = <540>;
> + };
> +
> + mt6366_vsim2_reg: vsim2 {
> + regulator-name = "pp2760_vsim2_x";
> + regulator-min-microvolt = <2700000>;
> + regulator-max-microvolt = <2760000>;
> + regulator-enable-ramp-delay = <540>;
> + };
> +
> + mt6366_vsram_gpu_reg: vsram-gpu {
> + regulator-name = "pp0900_dvdd_sram_gpu";
> + regulator-min-microvolt = <850000>;
> + regulator-max-microvolt = <1050000>;
> + regulator-ramp-delay = <6250>;
> + regulator-enable-ramp-delay = <240>;
> + regulator-coupled-with = <&mt6366_vgpu_reg>;
> + regulator-coupled-max-spread = <10000>;
> + };
> +
> + mt6366_vsram_others_reg: vsram-others {
> + regulator-name = "pp0900_dvdd_sram_core";
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <900000>;
> + regulator-ramp-delay = <6250>;
> + regulator-enable-ramp-delay = <240>;
> + regulator-always-on;
> + };
> +
> + mt6366_vsram_proc11_reg: vsram-proc11 {
> + regulator-name = "pp0900_dvdd_sram_bc";
> + regulator-min-microvolt = <850000>;
> + regulator-max-microvolt = <1120000>;
> + regulator-ramp-delay = <6250>;
> + regulator-enable-ramp-delay = <240>;
> + regulator-always-on;
> + };
> +
> + mt6366_vsram_proc12_reg: vsram-proc12 {
> + regulator-name = "pp0900_dvdd_sram_lc";
> + regulator-min-microvolt = <850000>;
> + regulator-max-microvolt = <1120000>;
> + regulator-ramp-delay = <6250>;
> + regulator-enable-ramp-delay = <240>;
> + regulator-always-on;
> + };
> +
> + vusb {
> + regulator-name = "pp3070_vusb";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3070000>;
> + regulator-enable-ramp-delay = <270>;
> + regulator-always-on;
> + };
> +
> + vxo22 {
> + regulator-name = "pp2240_vxo22";
> + regulator-min-microvolt = <2200000>;
> + regulator-max-microvolt = <2240000>;
> + regulator-enable-ramp-delay = <120>;
> + /* Feeds DCXO internally */
> + regulator-always-on;
> + };
> + };
> +
> + rtc {
> + compatible = "mediatek,mt6366-rtc", "mediatek,mt6358-rtc";
> + };
> + };
> +};
> +
> +&scp {
> + pinctrl-names = "default";
> + pinctrl-0 = <&scp_pins>;
> + firmware-name = "mediatek/mt8186/scp.img";
> + memory-region = <&scp_mem>;
> + status = "okay";
> +
> + cros-ec-rpmsg {
> + compatible = "google,cros-ec-rpmsg";
> + mediatek,rpmsg-name = "cros-ec-rpmsg";
> + };
> +};
> +
> +&spi1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&spi1_pins>;
> + mediatek,pad-select = <0>;
> + status = "okay";
> +
> + cros_ec: ec@0 {
> + compatible = "google,cros-ec-spi";
> + reg = <0>;
> + spi-max-frequency = <1000000>;
> + interrupts-extended = <&pio 13 IRQ_TYPE_LEVEL_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&ec_ap_int>;
> +
> + i2c_tunnel: i2c-tunnel {
> + compatible = "google,cros-ec-i2c-tunnel";
> + google,remote-bus = <1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + typec {
> + compatible = "google,cros-ec-typec";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + usb_c0: connector@0 {
> + compatible = "usb-c-connector";
> + reg = <0>;
> + label = "left";
> + power-role = "dual";
> + data-role = "host";
> + try-power-role = "source";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@1 {
> + reg = <1>;
> +
> + typec_port0: endpoint { };
> + };
> + };
> + };
> +
> + usb_c1: connector@1 {
> + compatible = "usb-c-connector";
> + reg = <1>;
> + label = "right";
> + power-role = "dual";
> + data-role = "host";
> + try-power-role = "source";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@1 {
> + reg = <1>;
> +
> + typec_port1: endpoint { };
> + };
> + };
> + };
> + };
> + };
> +};
> +
> +&spi2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&spi2_pins>;
> + cs-gpios = <&pio 45 GPIO_ACTIVE_LOW>;
> + mediatek,pad-select = <0>;
> + status = "okay";
> +
> + tpm@0 {
> + compatible = "google,cr50";
> + reg = <0>;
> + spi-max-frequency = <1000000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&gsc_int>;
> + interrupt-parent = <&pio>;
> + interrupts = <15 IRQ_TYPE_EDGE_RISING>;
> + };
> +};
> +
> +&ssusb0 {
> + status = "okay";
> +};
> +
> +&ssusb1 {
> + status = "okay";
> +};
> +
> +&u3phy0 {
> + status = "okay";
> +};
> +
> +&u3phy1 {
> + status = "okay";
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> +
> +&usb_host0 {
> + vbus-supply = <&pp3300_s3>;
> + status = "okay";
> +};
> +
> +&usb_host1 {
> + vbus-supply = <&usb_p1_vbus>;
> + status = "okay";
> + #address-cells = <2>;
> + #size-cells = <2>;
> +};
> +
> +&watchdog {
> + mediatek,reset-by-toprgu;
> +};
> +
> +#include <arm/cros-ec-keyboard.dtsi>
> +#include <arm/cros-ec-sbs.dtsi>
