The Milkv Mars is a development board based on the Starfive JH7110 SoC. The board features: - JH7110 SoC - 1/2/4/8 GiB LPDDR4 DRAM - AXP15060 PMIC - 40 pin GPIO header - 3x USB 3.0 host port - 1x USB 2.0 host port - 1x M.2 E-Key - 1x eMMC slot - 1x MicroSD slot - 1x QSPI Flash - 1x 1Gbps Ethernet port - 1x HDMI port - 1x 2-lane DSI and 1x 4-lane DSI - 1x 2-lane CSI patch1 adds 'cpus' label patch2 adds "milkv,mars" board dt-binding patch3 adds the devicetree file describing the currently supported features: Namely PMIC, UART, I2C, GPIO, SD card, QSPI Flash, eMMC and Ethernet. Since v1: - add two new patches which add "cpus" label and board dt-binding - adopt Krzysztof's suggestions, thanks Hi Conor, I see you have sent a patch which moves the timebase-frequency property to soc dtsi, but this series doesn't rebase on that. I can update it once your patch is merged. Thanks Jisheng Zhang (3): riscv: dts: starfive: add 'cpus' label to jh7110 and jh7100 soc dtsi dt-bindings: riscv: starfive: add Milkv Mars board riscv: dts: starfive: add Milkv Mars board device tree .../devicetree/bindings/riscv/starfive.yaml | 1 + arch/riscv/boot/dts/starfive/Makefile | 1 + arch/riscv/boot/dts/starfive/jh7100.dtsi | 2 +- .../boot/dts/starfive/jh7110-milkv-mars.dts | 637 ++++++++++++++++++ arch/riscv/boot/dts/starfive/jh7110.dtsi | 2 +- 5 files changed, 641 insertions(+), 2 deletions(-) create mode 100644 arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts -- 2.42.0
