On Fri, Dec 1, 2023 at 10:11 AM Peter Griffin <peter.griffin@xxxxxxxxxx> wrote:
>
> Google gs101 SoC is ARMv8 mobile SoC found in the Pixel 6,
> (oriole) Pixel 6a (bluejay) and Pixel 6 pro (raven) mobile
> phones. It features:
> * 4xA55 little cluster
> * 2xA76 Mid cluster
> * 2xX1 Big cluster
>
> This commit adds the basic device tree for gs101 (SoC).
> Further platform support will be added over time.
>
> Signed-off-by: Peter Griffin <peter.griffin@xxxxxxxxxx>
> ---
> .../boot/dts/exynos/google/gs101-pinctrl.dtsi | 1250 +++++++++++++++++
> .../boot/dts/exynos/google/gs101-pinctrl.h | 33 +
> arch/arm64/boot/dts/exynos/google/gs101.dtsi | 476 +++++++
> 3 files changed, 1759 insertions(+)
> create mode 100644 arch/arm64/boot/dts/exynos/google/gs101-pinctrl.dtsi
> create mode 100644 arch/arm64/boot/dts/exynos/google/gs101-pinctrl.h
> create mode 100644 arch/arm64/boot/dts/exynos/google/gs101.dtsi
>
> diff --git a/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.dtsi
> new file mode 100644
> index 000000000000..8c0f0cf75edb
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.dtsi
> @@ -0,0 +1,1250 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * GS101 SoC pin-mux and pin-config device tree source
> + *
> + * Copyright 2019-2023 Google LLC
> + * Copyright 2023 Linaro Ltd - <peter.griffin@xxxxxxxxxx>
> + */
> +
> +#include "gs101-pinctrl.h"
> +
> +&pinctrl_gpio_alive {
> + gpa0: gpa0-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>;
> + };
> +
> + gpa1: gpa1-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH 0>;
> + };
> +
> + gpa2: gpa2-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>;
> + };
> +
> + gpa3: gpa3-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
> + };
> +
> + gpa4: gpa4-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>;
> + };
> +
> + gpa5: gpa5-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH 0>;
> + };
> +
> + gpa9: gpa9-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH 0>;
> + };
> +
> + gpa10: gpa10-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>;
> + };
> +
> + uart15_bus: uart15-bus-pins {
> + samsung,pins = "gpa2-3", "gpa2-4";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + };
> +
> + uart16_bus: uart16-bus-pins {
> + samsung,pins = "gpa3-0", "gpa3-1", "gpa3-2", "gpa3-3";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + };
> +
> + uart17_bus: uart17-bus-pins {
> + samsung,pins = "gpa4-0", "gpa4-1", "gpa4-2", "gpa4-3";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + };
> +
> + spi15_bus: spi15-bus-pins {
> + samsung,pins = "gpa4-0", "gpa4-1", "gpa4-2";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + spi15_cs: spi15-cs-pins {
> + samsung,pins = "gpa4-3";
> + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +};
> +
> +&pinctrl_far_alive {
> + gpa6: gpa6-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH 0>;
> + };
> +
> + gpa7: gpa7-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH 0>;
> + };
> +
> + gpa8: gpa8-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH 0>;
> + };
> +
> + gpa11: gpa11-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH 0>;
> + };
> +};
> +
> +&pinctrl_gsacore {
> + gps0: gps0-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gps1: gps1-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gps2: gps2-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +};
> +
> +&pinctrl_gsactrl {
> + gps3: gps3-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +};
> +
> +&pinctrl_hsi1 {
> + gph0: gph0-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gph1: gph1-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + pcie0_clkreq: pcie0-clkreq-pins{
> + samsung,pins = "gph0-1";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_UP>;
> + samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
> + samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
> + samsung,pin-pud-pdn = <GS101_PIN_PULL_UP>;
> + };
> +
> + pcie0_perst: pcie0-perst-pins {
> + samsung,pins = "gph0-0";
> + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> + samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
> + samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
> + };
> +};
> +
> +&pinctrl_hsi2 {
> + gph2: gph2-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gph3: gph3-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gph4: gph4-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + sd2_clk: sd2-clk-pins {
> + samsung,pins = "gph4-0";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
> + };
> +
> + sd2_cmd: sd2-cmd-pins {
> + samsung,pins = "gph4-1";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_UP>;
> + samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
> + };
> +
> + sd2_bus1: sd2-bus-width1-pins {
> + samsung,pins = "gph4-2";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_UP>;
> + samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
> + };
> +
> + sd2_bus4: sd2-bus-width4-pins {
> + samsung,pins = "gph4-3", "gph4-4", "gph4-5";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_UP>;
> + samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
> + };
> +
> + sd2_clk_fast_slew_rate_1x: sd2-clk-fast-slew-rate-1x-pins {
> + samsung,pins = "gph4-0";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + sd2_clk_fast_slew_rate_2x: sd2-clk-fast-slew-rate-2x-pins {
> + samsung,pins = "gph4-0";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> + };
> +
> + sd2_clk_fast_slew_rate_3x: sd2-clk-fast-slew-rate-3x-pins {
> + samsung,pins = "gph4-0";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>;
> + };
> +
> + sd2_clk_fast_slew_rate_4x: sd2-clk-fast-slew-rate-4x-pins {
> + samsung,pins = "gph4-0";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
> + };
> +
> + ufs_rst_n: ufs-rst-n-pins {
> + samsung,pins = "gph3-1";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
> + samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>;
> + };
> +
> + ufs_refclk_out: ufs-refclk-out-pins {
> + samsung,pins = "gph3-0";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
> + samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>;
> + };
> +
> + pcie1_clkreq: pcie1-clkreq-pins {
> + samsung,pins = "gph2-1";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_UP>;
> + samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
> + samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
> + samsung,pin-pud-pdn = <GS101_PIN_PULL_UP>;
> + };
> +
> + pcie1_perst: pcie1-perst-pins {
> + samsung,pins = "gph2-0";
> + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> + samsung,pin-drv = <GS101_PIN_DRV_10_MA>;
> + samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
> + };
> +};
> +
> +&pinctrl_peric0 {
> + gpp0: gpp0-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpp1: gpp1-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpp2: gpp2-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpp3: gpp3-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpp4: gpp4-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpp5: gpp5-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpp6: gpp6-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpp7: gpp7-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpp8: gpp8-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpp9: gpp9-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpp10: gpp10-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpp11: gpp11-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpp12: gpp12-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpp13: gpp13-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpp14: gpp14-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpp15: gpp15-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpp16: gpp16-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpp17: gpp17-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpp18: gpp18-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpp19: gpp19-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + /* USI_PERIC0_UART_DBG */
> + uart0_bus: uart0-bus-pins {
> + samsung,pins = "gpp1-2", "gpp1-3";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + };
> +
> + disp_te_pri_on: disp-te-pri-on-pins {
> + samsung,pins = "gpp0-3";
> + samsung,pin-function = <GS101_PIN_FUNC_EINT>;
> + };
> +
> + disp_te_pri_off: disp-te-pri-off-pins {
> + samsung,pins = "gpp0-3";
> + samsung,pin-function = <GS101_PIN_FUNC_INPUT>;
> + };
> +
> + disp_te_sec_on: disp-te-sec-on-pins {
> + samsung,pins = "gpp0-4";
> + samsung,pin-function = <GS101_PIN_FUNC_EINT>;
> + };
> +
> + disp_te_sec_off: disp-te-sec-off-pins {
> + samsung,pins = "gpp0-4";
> + samsung,pin-function = <GS101_PIN_FUNC_INPUT>;
> + };
> +
> + sensor_mclk1_out: sensor-mclk1-out-pins {
> + samsung,pins = "gpp3-0";
> + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
> + samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> + };
> +
> + sensor_mclk1_fn: sensor-mclk1-fn-pins {
> + samsung,pins = "gpp3-0";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> + };
> +
> + sensor_mclk2_out: sensor-mclk2-out-pins {
> + samsung,pins = "gpp5-0";
> + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
> + samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> + };
> +
> + sensor_mclk2_fn: sensor-mclk2-fn-pins {
> + samsung,pins = "gpp5-0";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> + };
> +
> + sensor_mclk3_out: sensor-mclk3-out-pins {
> + samsung,pins = "gpp7-0";
> + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
> + samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> + };
> +
> + sensor_mclk3_fn: sensor-mclk3-fn-pins {
> + samsung,pins = "gpp7-0";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> + };
> +
> + sensor_mclk4_out: sensor-mclk4-out-pins {
> + samsung,pins = "gpp9-0";
> + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
> + samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> + };
> +
> + sensor_mclk4_fn: sensor-mclk4-fn-pins {
> + samsung,pins = "gpp9-0";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> + };
> +
> + sensor_mclk5_out: sensor-mclk5-out-pins {
> + samsung,pins = "gpp11-0";
> + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
> + samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> + };
> +
> + sensor_mclk5_fn: sensor-mclk5-fn-pins {
> + samsung,pins = "gpp11-0";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> + };
> +
> + sensor_mclk6_out: sensor-mclk6-out-pins {
> + samsung,pins = "gpp13-0";
> + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
> + samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> + };
> +
> + sensor_mclk6_fn: sensor-mclk6-fn-pins {
> + samsung,pins = "gpp13-0";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> + };
> +
> + sensor_mclk7_out: sensor-mclk7-out-pins {
> + samsung,pins = "gpp15-0";
> + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
> + samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> + };
> +
> + sensor_mclk7_fn: sensor-mclk7-fn-pins {
> + samsung,pins = "gpp15-0";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> + };
> +
> + sensor_mclk8_out: sensor-mclk8-out-pins {
> + samsung,pins = "gpp17-0";
> + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <GS101_PIN_PULL_DOWN>;
> + samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> + };
> +
> + sensor_mclk8_fn: sensor-mclk8-fn-pins {
> + samsung,pins = "gpp17-0";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_5_MA>;
> + };
> +
> + hsi2c14_bus: hsi2c14-bus-pins {
> + samsung,pins = "gpp18-0", "gpp18-1";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + uart14_bus_single: uart14-bus-pins {
> + samsung,pins = "gpp18-0", "gpp18-1",
> + "gpp18-2", "gpp18-3";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + };
> +
> + spi14_bus: spi14-bus-pins {
> + samsung,pins = "gpp18-0", "gpp18-1", "gpp18-2";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + spi14_cs: spi14-cs-pins {
> + samsung,pins = "gpp18-3";
> + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + spi14_cs_func: spi14-cs-func-pins {
> + samsung,pins = "gpp18-3";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + hsi2c8_bus: hsi2c8-bus-pins {
> + samsung,pins = "gpp16-0", "gpp16-1";
> + samsung,pin-function = <GS101_PIN_FUNC_3>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + samsung,pin-pud-pdn = <GS101_PIN_PDN_OUT0>;
> + };
> +
> + uart8_bus_single: uart8-bus-pins {
> + samsung,pins = "gpp16-0", "gpp16-1", "gpp16-2",
> + "gpp16-3";
> + samsung,pin-function = <GS101_PIN_FUNC_3>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + };
> +
> + spi8_bus: spi8-bus-pins {
> + samsung,pins = "gpp16-0", "gpp16-1", "gpp16-2";
> + samsung,pin-function = <GS101_PIN_FUNC_3>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + spi8_cs: spi8-cs-pins {
> + samsung,pins = "gpp16-3";
> + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + spi8_cs_func: spi8-cs-func-pins {
> + samsung,pins = "gpp16-3";
> + samsung,pin-function = <GS101_PIN_FUNC_3>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + hsi2c7_bus: hsi2c7-bus-pins {
> + samsung,pins = "gpp14-0", "gpp14-1";
> + samsung,pin-function = <GS101_PIN_FUNC_3>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + uart7_bus_single: uart7-bus-pins {
> + samsung,pins = "gpp14-0", "gpp14-1",
> + "gpp14-2", "gpp14-3";
> + samsung,pin-function = <GS101_PIN_FUNC_3>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + };
> +
> + spi7_bus: spi7-bus-pins {
> + samsung,pins = "gpp14-0", "gpp14-1", "gpp14-2";
> + samsung,pin-function = <GS101_PIN_FUNC_3>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + spi7_cs: spi7-cs-pins {
> + samsung,pins = "gpp14-3";
> + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + spi7_cs_func: spi7-cs-func-pins {
> + samsung,pins = "gpp14-3";
> + samsung,pin-function = <GS101_PIN_FUNC_3>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + hsi2c6_bus: hsi2c6-bus-pins {
> + samsung,pins = "gpp12-0", "gpp12-1";
> + samsung,pin-function = <GS101_PIN_FUNC_3>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + uart6_bus_single: uart6-bus-pins {
> + samsung,pins = "gpp12-0", "gpp12-1",
> + "gpp12-2", "gpp12-3";
> + samsung,pin-function = <GS101_PIN_FUNC_3>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + };
> +
> + spi6_bus: spi6-bus-pins {
> + samsung,pins = "gpp12-0", "gpp12-1", "gpp12-2";
> + samsung,pin-function = <GS101_PIN_FUNC_3>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + spi6_cs: spi6-cs-pins {
> + samsung,pins = "gpp12-3";
> + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + spi6_cs_func: spi6-cs-func-pins {
> + samsung,pins = "gpp12-3";
> + samsung,pin-function = <GS101_PIN_FUNC_3>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + hsi2c5_bus: hsi2c5-bus-pins {
> + samsung,pins = "gpp10-0", "gpp10-1";
> + samsung,pin-function = <GS101_PIN_FUNC_3>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + uart5_bus_single: uart5-bus-pins {
> + samsung,pins = "gpp10-0", "gpp10-1",
> + "gpp10-2", "gpp10-3";
> + samsung,pin-function = <GS101_PIN_FUNC_3>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + };
> +
> + spi5_bus: spi5-bus-pins {
> + samsung,pins = "gpp10-0", "gpp10-1", "gpp10-2";
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + samsung,pin-function = <GS101_PIN_FUNC_3>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
> + samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>;
> + };
> +
> + spi5_cs_func: spi5-cs-func-pins {
> + samsung,pins = "gpp10-3";
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + samsung,pin-function = <GS101_PIN_FUNC_3>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>;
> + samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>;
> + };
> +
> + hsi2c4_bus: hsi2c4-bus-pins {
> + samsung,pins = "gpp8-0", "gpp8-1";
> + samsung,pin-function = <GS101_PIN_FUNC_3>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + uart4_bus_single: uart4-bus-pins {
> + samsung,pins = "gpp8-0", "gpp8-1",
> + "gpp8-2", "gpp8-3";
> + samsung,pin-function = <GS101_PIN_FUNC_3>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + };
> +
> + spi4_bus: spi4-bus-pins {
> + samsung,pins = "gpp8-0", "gpp8-1", "gpp8-2";
> + samsung,pin-function = <GS101_PIN_FUNC_3>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + spi4_cs: spi4-cs-pins {
> + samsung,pins = "gpp8-3";
> + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + spi4_cs_func: spi4-cs-func-pins {
> + samsung,pins = "gpp8-3";
> + samsung,pin-function = <GS101_PIN_FUNC_3>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + hsi2c3_bus: hsi2c3-bus-pins {
> + samsung,pins = "gpp6-0", "gpp6-1";
> + samsung,pin-function = <GS101_PIN_FUNC_3>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + uart3_bus_single: uart3-bus-pins {
> + samsung,pins = "gpp6-0", "gpp6-1",
> + "gpp6-2", "gpp6-3";
> + samsung,pin-function = <GS101_PIN_FUNC_3>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + };
> +
> + spi3_bus: spi3-bus-pins {
> + samsung,pins = "gpp6-0", "gpp6-1", "gpp6-2";
> + samsung,pin-function = <GS101_PIN_FUNC_3>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + spi3_cs: spi3-cs-pins {
> + samsung,pins = "gpp6-3";
> + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + spi3_cs_func: spi3-cs-func-pins {
> + samsung,pins = "gpp6-3";
> + samsung,pin-function = <GS101_PIN_FUNC_3>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + hsi2c2_bus: hsi2c2-bus-pins {
> + samsung,pins = "gpp4-0", "gpp4-1";
> + samsung,pin-function = <GS101_PIN_FUNC_3>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + uart2_bus_single: uart2-bus-pins {
> + samsung,pins = "gpp4-0", "gpp4-1",
> + "gpp4-2", "gpp4-3";
> + samsung,pin-function = <GS101_PIN_FUNC_3>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + };
> +
> + spi2_bus: spi2-bus-pins {
> + samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2";
> + samsung,pin-function = <GS101_PIN_FUNC_3>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + spi2_cs: spi2-cs-pins {
> + samsung,pins = "gpp4-3";
> + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + spi2_cs_func: spi2-cs-func-pins {
> + samsung,pins = "gpp4-3";
> + samsung,pin-function = <GS101_PIN_FUNC_3>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + hsi2c1_bus: hsi2c1-bus-pins {
> + samsung,pins = "gpp2-0", "gpp2-1";
> + samsung,pin-function = <GS101_PIN_FUNC_3>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + uart1_bus_single: uart1-bus-pins {
> + samsung,pins = "gpp2-0", "gpp2-1",
> + "gpp2-2", "gpp2-3";
> + samsung,pin-function = <GS101_PIN_FUNC_3>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + };
> +
> + spi1_bus: spi1-bus-pins {
> + samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2";
> + samsung,pin-function = <GS101_PIN_FUNC_3>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + spi1_cs: spi1-cs-pins {
> + samsung,pins = "gpp2-3";
> + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + spi1_cs_func: spi1-cs-func-pins {
> + samsung,pins = "gpp2-3";
> + samsung,pin-function = <GS101_PIN_FUNC_3>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +};
> +
> +&pinctrl_peric1 {
> + gpp20: gpp20-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpp21: gpp21-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpp22: gpp22-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpp23: gpp23-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpp24: gpp24-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpp25: gpp25-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpp26: gpp26-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + gpp27: gpp27-gpio-bank {
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + hsi2c13_bus: hsi2c13-bus-pins {
> + samsung,pins = "gpp25-0", "gpp25-1";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + uart13_bus_single: uart13-bus-pins {
> + samsung,pins = "gpp25-0", "gpp25-1",
> + "gpp25-2", "gpp25-3";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + };
> +
> + spi13_bus: spi13-bus-pins {
> + samsung,pins = "gpp25-0", "gpp25-1", "gpp25-2";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + spi13_cs: spi13-cs-pins {
> + samsung,pins = "gpp25-3";
> + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + spi13_cs_func: spi13-cs-func-pins {
> + samsung,pins = "gpp25-3";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + hsi2c12_bus: hsi2c12-bus-pins {
> + samsung,pins = "gpp23-4", "gpp23-5";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + uart12_bus_single: uart12-bus-pins {
> + samsung,pins = "gpp23-4", "gpp23-5",
> + "gpp23-6", "gpp23-7";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + };
> +
> + spi12_bus: spi12-bus-pins {
> + samsung,pins = "gpp23-4", "gpp23-5", "gpp23-6";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + spi14_cs2: spi14-cs2-pins {
> + samsung,pins = "gpp23-6";
> + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + spi12_cs: spi12-cs-pins {
> + samsung,pins = "gpp23-7";
> + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + spi12_cs_func: spi12-cs-func-pins {
> + samsung,pins = "gpp23-7";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + hsi2c11_bus: hsi2c11-bus-pins {
> + samsung,pins = "gpp23-0", "gpp23-1";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + uart11_bus_single: uart11-bus-pins {
> + samsung,pins = "gpp23-0", "gpp23-1",
> + "gpp23-2", "gpp23-3";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + };
> +
> + spi11_bus: spi11-bus-pins {
> + samsung,pins = "gpp23-0", "gpp23-1", "gpp23-2";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + spi11_cs: spi11-cs-pins {
> + samsung,pins = "gpp23-3";
> + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + spi11_cs_func: spi11-cs-func-pins {
> + samsung,pins = "gpp23-3";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + hsi2c10_bus: hsi2c10-bus-pins {
> + samsung,pins = "gpp21-0", "gpp21-1";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + uart10_bus_single: uart10-bus-pins {
> + samsung,pins = "gpp21-0", "gpp21-1",
> + "gpp21-2", "gpp21-3";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + };
> +
> + spi10_bus: spi10-bus-pins {
> + samsung,pins = "gpp21-0", "gpp21-1", "gpp21-2";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + spi10_cs: spi10-cs-pins {
> + samsung,pins = "gpp21-3";
> + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + spi10_cs_func: spi10-cs-func-pins {
> + samsung,pins = "gpp21-3";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + hsi2c9_bus: hsi2c9-bus-pins {
> + samsung,pins = "gpp20-4", "gpp20-5";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + uart9_bus_single: uart9-bus-pins {
> + samsung,pins = "gpp20-4", "gpp20-5",
> + "gpp20-6", "gpp20-7";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + };
> +
> + spi9_bus: spi9-bus-pins {
> + samsung,pins = "gpp20-4", "gpp20-5", "gpp20-6";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + spi9_cs: spi9-cs-pins {
> + samsung,pins = "gpp20-7";
> + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + spi9_cs_func: spi9-cs-func-pins {
> + samsung,pins = "gpp20-7";
> + samsung,pin-function = <GS101_PIN_FUNC_2>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + hsi2c0_bus: hsi2c0-bus-pins {
> + samsung,pins = "gpp20-0", "gpp20-1";
> + samsung,pin-function = <GS101_PIN_FUNC_3>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + uart0_bus_single: uart0-bus-pins {
> + samsung,pins = "gpp20-0", "gpp20-1",
> + "gpp20-2", "gpp20-3";
> + samsung,pin-function = <GS101_PIN_FUNC_3>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + };
> +
> + spi0_bus: spi0-bus-pins {
> + samsung,pins = "gpp20-0", "gpp20-1", "gpp20-2";
> + samsung,pin-function = <GS101_PIN_FUNC_3>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + spi0_cs: spi0-cs-pins {
> + samsung,pins = "gpp20-3";
> + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + spi0_cs_func: spi0-cs-func-pins {
> + samsung,pins = "gpp20-3";
> + samsung,pin-function = <GS101_PIN_FUNC_3>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +};
> +
Nitpick: this empty line is not needed.
> diff --git a/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.h b/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.h
> new file mode 100644
> index 000000000000..853505e45b60
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.h
> @@ -0,0 +1,33 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Pinctrl binding constants for GS101
> + *
> + * Copyright (c) 2020-2023 Google, LLC.
> + */
> +
> +#ifndef __DT_BINDINGS_PINCTRL_GS101_H__
> +#define __DT_BINDINGS_PINCTRL_GS101_H__
> +
> +#define GS101_PIN_PULL_NONE 0
> +#define GS101_PIN_PULL_DOWN 1
> +#define GS101_PIN_PULL_UP 3
> +
> +/* Pin function in power down mode */
> +#define GS101_PIN_PDN_OUT0 0
> +#define GS101_PIN_PDN_OUT1 1
> +#define GS101_PIN_PDN_INPUT 2
> +#define GS101_PIN_PDN_PREV 3
> +
> +/* GS101 drive strengths */
> +#define GS101_PIN_DRV_2_5_MA 0
> +#define GS101_PIN_DRV_5_MA 1
> +#define GS101_PIN_DRV_7_5_MA 2
> +#define GS101_PIN_DRV_10_MA 3
> +
> +#define GS101_PIN_FUNC_INPUT 0
> +#define GS101_PIN_FUNC_OUTPUT 1
> +#define GS101_PIN_FUNC_2 2
> +#define GS101_PIN_FUNC_3 3
> +#define GS101_PIN_FUNC_EINT 0xf
> +
Still feels fishy to me that it was decided to have this file instead
of re-using existing Exynos constants. For example, in Exynos850 I
used common constants and it was ok, but it's not ok for this SoC,
althought they look *identical* in a sense of pinctrl. And all those
constants already exist, also identical. So I wonder why something
like this shouldn't be done for Exynos850 as well. But ok.
> +#endif /* __DT_BINDINGS_PINCTRL_GS101_H__ */
> diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
> new file mode 100644
> index 000000000000..40f6654a23f2
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
> @@ -0,0 +1,476 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * GS101 SoC
> + *
> + * Copyright 2019-2023 Google LLC
> + * Copyright 2023 Linaro Ltd - <peter.griffin@xxxxxxxxxx>
> + */
> +
> +#include <dt-bindings/clock/google,gs101.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/soc/samsung,exynos-usi.h>
> +
> +/ {
> + compatible = "google,gs101";
> + #address-cells = <2>;
> + #size-cells = <1>;
> +
> + interrupt-parent = <&gic>;
> +
> + aliases {
> + pinctrl0 = &pinctrl_gpio_alive;
> + pinctrl1 = &pinctrl_far_alive;
> + pinctrl2 = &pinctrl_gsacore;
> + pinctrl3 = &pinctrl_gsactrl;
> + pinctrl4 = &pinctrl_peric0;
> + pinctrl5 = &pinctrl_peric1;
> + pinctrl6 = &pinctrl_hsi1;
> + pinctrl7 = &pinctrl_hsi2;
> + serial0 = &serial_0;
Please check commit f4324583cd4d ("arm64: dts: exynos: move aliases to
board in Exynos850"). At least for Exynos850 the serial alias was
moved to the board dts by Krzysztof.
> + };
> +
> + pmu-0 {
> + compatible = "arm,cortex-a55-pmu";
> + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>;
> + };
> +
> + pmu-1 {
> + compatible = "arm,cortex-a76-pmu";
> + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>;
> + };
> +
> + pmu-2 {
> + compatible = "arm,cortex-x1-pmu";
> + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster2>;
> + };
> +
> + pmu-3 {
> + compatible = "arm,dsu-pmu";
> + interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH 0>;
> + cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>,
> + <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
> + };
> +
> + /* TODO replace with CCF clock */
> + dummy_clk: oscillator {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <12345>;
> + clock-output-names = "pclk";
> + };
Don't you already have real USI/UART clocks implemented in your clock driver?
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu-map {
> + cluster0 {
> + core0 {
> + cpu = <&cpu0>;
> + };
> + core1 {
> + cpu = <&cpu1>;
> + };
> + core2 {
> + cpu = <&cpu2>;
> + };
> + core3 {
> + cpu = <&cpu3>;
> + };
> + };
> +
> + cluster1 {
> + core0 {
> + cpu = <&cpu4>;
> + };
> + core1 {
> + cpu = <&cpu5>;
> + };
> + };
> +
> + cluster2 {
> + core0 {
> + cpu = <&cpu6>;
> + };
> + core1 {
> + cpu = <&cpu7>;
> + };
> + };
> + };
> +
> + cpu0: cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a55";
> + reg = <0x0000>;
> + enable-method = "psci";
> + cpu-idle-states = <&ANANKE_CPU_SLEEP>;
> + capacity-dmips-mhz = <250>;
> + dynamic-power-coefficient = <70>;
> + };
> +
> + cpu1: cpu@100 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a55";
> + reg = <0x0100>;
> + enable-method = "psci";
> + cpu-idle-states = <&ANANKE_CPU_SLEEP>;
> + capacity-dmips-mhz = <250>;
> + dynamic-power-coefficient = <70>;
> + };
> +
> + cpu2: cpu@200 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a55";
> + reg = <0x0200>;
> + enable-method = "psci";
> + cpu-idle-states = <&ANANKE_CPU_SLEEP>;
> + capacity-dmips-mhz = <250>;
> + dynamic-power-coefficient = <70>;
> + };
> +
> + cpu3: cpu@300 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a55";
> + reg = <0x0300>;
> + enable-method = "psci";
> + cpu-idle-states = <&ANANKE_CPU_SLEEP>;
> + capacity-dmips-mhz = <250>;
> + dynamic-power-coefficient = <70>;
> + };
> +
> + cpu4: cpu@400 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a76";
> + reg = <0x0400>;
> + enable-method = "psci";
> + cpu-idle-states = <&ENYO_CPU_SLEEP>;
> + capacity-dmips-mhz = <620>;
> + dynamic-power-coefficient = <284>;
> + };
> +
> + cpu5: cpu@500 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a76";
> + reg = <0x0500>;
> + enable-method = "psci";
> + cpu-idle-states = <&ENYO_CPU_SLEEP>;
> + capacity-dmips-mhz = <620>;
> + dynamic-power-coefficient = <284>;
> + };
> +
> + cpu6: cpu@600 {
> + device_type = "cpu";
> + compatible = "arm,cortex-x1";
> + reg = <0x0600>;
> + enable-method = "psci";
> + cpu-idle-states = <&HERA_CPU_SLEEP>;
> + capacity-dmips-mhz = <1024>;
> + dynamic-power-coefficient = <650>;
> + };
> +
> + cpu7: cpu@700 {
> + device_type = "cpu";
> + compatible = "arm,cortex-x1";
> + reg = <0x0700>;
> + enable-method = "psci";
> + cpu-idle-states = <&HERA_CPU_SLEEP>;
> + capacity-dmips-mhz = <1024>;
> + dynamic-power-coefficient = <650>;
> + };
> +
> + idle-states {
> + entry-method = "psci";
> +
> + ANANKE_CPU_SLEEP: cpu-ananke-sleep {
> + idle-state-name = "c2";
> + compatible = "arm,idle-state";
> + arm,psci-suspend-param = <0x0010000>;
> + entry-latency-us = <70>;
> + exit-latency-us = <160>;
> + min-residency-us = <2000>;
> + };
> +
> + ENYO_CPU_SLEEP: cpu-enyo-sleep {
> + idle-state-name = "c2";
> + compatible = "arm,idle-state";
> + arm,psci-suspend-param = <0x0010000>;
> + entry-latency-us = <150>;
> + exit-latency-us = <190>;
> + min-residency-us = <2500>;
> + };
> +
> + HERA_CPU_SLEEP: cpu-hera-sleep {
> + idle-state-name = "c2";
> + compatible = "arm,idle-state";
> + arm,psci-suspend-param = <0x0010000>;
> + entry-latency-us = <235>;
> + exit-latency-us = <220>;
> + min-residency-us = <3500>;
> + };
> + };
> + };
> +
> + /* ect node is required to be present by bootloader */
> + ect {
> + };
> +
> + ext_24_5m: clock-1 {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-output-names = "oscclk";
> + };
> +
> + ext_200m: clock-2 {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-output-names = "ext-200m";
> + };
> +
> + psci {
> + compatible = "arm,psci-1.0";
> + method = "smc";
> + };
> +
> + reserved_memory: reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <1>;
> + ranges;
> +
> + gsa_reserved_protected: gsa@90200000 {
> + reg = <0x0 0x90200000 0x400000>;
> + no-map;
> + };
> +
> + tpu_fw_reserved: tpu-fw@93000000 {
> + reg = <0x0 0x93000000 0x1000000>;
> + no-map;
> + };
> +
> + aoc_reserve: aoc@94000000 {
> + reg = <0x0 0x94000000 0x03000000>;
> + no-map;
> + };
> +
> + abl_reserved: abl@f8800000 {
> + reg = <0x0 0xf8800000 0x02000000>;
> + no-map;
> + };
> +
> + dss_log_reserved: dss-log-reserved@fd3f0000 {
> + reg = <0x0 0xfd3f0000 0x0000e000>;
> + no-map;
> + };
> +
> + debug_kinfo_reserved: debug-kinfo-reserved@fd3fe000 {
> + reg = <0x0 0xfd3fe000 0x00001000>;
> + no-map;
> + };
> +
> + bldr_log_reserved: bldr-log-reserved@fd800000 {
> + reg = <0x0 0xfd800000 0x00100000>;
> + no-map;
> + };
> +
> + bldr_log_hist_reserved: bldr-log-hist-reserved@fd900000 {
> + reg = <0x0 0xfd900000 0x00002000>;
> + no-map;
> + };
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts =
> + <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>;
> + clock-frequency = <24576000>;
> + };
> +
> + soc: soc@0 {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x0 0x0 0x40000000>;
> +
> + cmu_misc: clock-controller@10010000 {
> + compatible = "google,gs101-cmu-misc";
> + reg = <0x10010000 0x8000>;
> + #clock-cells = <1>;
> + clocks = <&ext_24_5m>, <&cmu_top CLK_DOUT_MISC_BUS>;
> + clock-names = "oscclk", "dout_cmu_misc_bus";
> + };
> +
> + watchdog_cl0: watchdog@10060000 {
> + compatible = "google,gs101-wdt";
> + reg = <0x10060000 0x100>;
> + interrupts = <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH 0>;
> + clocks =
> + <&cmu_misc CLK_GOUT_MISC_WDT_CLUSTER0_IPCLKPORT_PCLK>,
> + <&ext_24_5m>;
> + clock-names = "watchdog", "watchdog_src";
> + samsung,syscon-phandle = <&pmu_system_controller>;
> + samsung,cluster-index = <0>;
> + status = "disabled";
> + };
Krzysztof, can you please advice which scheme is preferred right now:
sorting by name or by address? I saw your patch for dts style doc, but
just want to know the current state of affairs.
> +
> + watchdog_cl1: watchdog@10070000 {
> + compatible = "google,gs101-wdt";
> + reg = <0x10070000 0x100>;
> + interrupts = <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH 0>;
> + clocks =
> + <&cmu_misc CLK_GOUT_MISC_WDT_CLUSTER1_IPCLKPORT_PCLK>,
> + <&ext_24_5m>;
> + clock-names = "watchdog", "watchdog_src";
> + samsung,syscon-phandle = <&pmu_system_controller>;
> + samsung,cluster-index = <1>;
> + status = "disabled";
> + };
> +
> + gic: interrupt-controller@10400000 {
> + compatible = "arm,gic-v3";
> + #interrupt-cells = <4>;
> + interrupt-controller;
> + reg = <0x10400000 0x10000>, /* GICD */
> + <0x10440000 0x100000>;/* GICR * 8 */
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
> +
> + ppi-partitions {
> + ppi_cluster0: interrupt-partition-0 {
> + affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
> + };
> +
> + ppi_cluster1: interrupt-partition-1 {
> + affinity = <&cpu4 &cpu5>;
> + };
> +
> + ppi_cluster2: interrupt-partition-2 {
> + affinity = <&cpu6 &cpu7>;
> + };
> + };
> + };
> +
> + sysreg_peric0: syscon@10820000 {
> + compatible = "google,gs101-peric0-sysreg", "syscon";
> + reg = <0x10820000 0x10000>;
> + };
> +
> + pinctrl_peric0: pinctrl@10840000 {
> + compatible = "google,gs101-pinctrl";
> + reg = <0x10840000 0x00001000>;
> + interrupts = <GIC_SPI 625 IRQ_TYPE_LEVEL_HIGH 0>;
> + };
> +
> + usi_uart: usi@10a000c0 {
> + compatible = "google,gs101-usi",
I can't see this compatible in USI driver. Does it make sense to add it there?
> + "samsung,exynos850-usi";
> + reg = <0x10a000c0 0x20>;
> + samsung,sysreg = <&sysreg_peric0 0x1020>;
> + samsung,mode = <USI_V2_UART>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> + clocks = <&dummy_clk>, <&dummy_clk>;
The same concern as above. I think I saw those clocks already
implemented in gs101 clock driver.
> + clock-names = "pclk", "ipclk";
> + status = "disabled";
> +
> + serial_0: serial@10a00000 {
> + compatible = "google,gs101-uart";
> + reg = <0x10a00000 0xc0>;
> + reg-io-width = <4>;
> + samsung,uart-fifosize = <256>;
> + interrupts = <GIC_SPI 634
> + IRQ_TYPE_LEVEL_HIGH 0>;
> + clocks = <&dummy_clk 0>, <&dummy_clk 0>;
Ditto.
> + clock-names = "uart", "clk_uart_baud0";
> + status = "disabled";
> + };
> + };
> +
> + pinctrl_peric1: pinctrl@10c40000 {
> + compatible = "google,gs101-pinctrl";
> + reg = <0x10C40000 0x00001000>;
> + interrupts = <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH 0>;
> + };
> +
> + sysreg_peric1: syscon@10c20000 {
> + compatible = "google,gs101-peric1-sysreg", "syscon";
> + reg = <0x10C20000 0x10000>;
> + };
> +
> + pinctrl_hsi1: pinctrl@11840000 {
> + compatible = "google,gs101-pinctrl";
> + reg = <0x11840000 0x00001000>;
> + interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH 0>;
> + };
> +
> + pinctrl_hsi2: pinctrl@14440000 {
> + compatible = "google,gs101-pinctrl";
> + reg = <0x14440000 0x00001000>;
> + interrupts = <GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH 0>;
> + };
> +
> + cmu_apm: clock-controller@17400000 {
> + compatible = "google,gs101-cmu-apm";
> + reg = <0x17400000 0x8000>;
> + #clock-cells = <1>;
> +
> + clocks = <&ext_24_5m>;
> + clock-names = "oscclk";
Doesn't CMU_APM take any clocks from CMU_TOP?
> + };
> +
> + sysreg_apm: syscon@174204e0 {
> + compatible = "google,gs101-apm-sysreg", "syscon";
> + reg = <0x174204e0 0x1000>;
> + };
> +
> + pmu_system_controller: system-controller@17460000 {
> + compatible = "google,gs101-pmu", "syscon";
> + reg = <0x17460000 0x10000>;
> + };
Just a suggestion: it might be relatively simple to add syscon-reboot
node in pmu_system_controller, and it might just work. One more
feature for free! :)
> +
> + pinctrl_gpio_alive: pinctrl@174d0000 {
> + compatible = "google,gs101-pinctrl";
> + reg = <0x174d0000 0x00001000>;
> +
> + wakeup-interrupt-controller {
> + compatible = "google,gs101-wakeup-eint",
> + "samsung,exynos850-wakeup-eint",
> + "samsung,exynos7-wakeup-eint";
> + };
> + };
> +
> + pinctrl_far_alive: pinctrl@174e0000 {
> + compatible = "google,gs101-pinctrl";
> + reg = <0x174e0000 0x00001000>;
> +
> + wakeup-interrupt-controller {
> + compatible = "google,gs101-wakeup-eint",
> + "samsung,exynos850-wakeup-eint",
> + "samsung,exynos7-wakeup-eint";
> + };
> + };
> +
> + pinctrl_gsactrl: pinctrl@17940000 {
> + compatible = "google,gs101-pinctrl";
> + reg = <0x17940000 0x00001000>;
> + };
> +
> + pinctrl_gsacore: pinctrl@17a80000 {
> + compatible = "google,gs101-pinctrl";
> + reg = <0x17a80000 0x00001000>;
> + };
> +
> + cmu_top: clock-controller@1e080000 {
> + compatible = "google,gs101-cmu-top";
> + reg = <0x1e080000 0x8000>;
> + #clock-cells = <1>;
> +
> + clocks = <&ext_24_5m>;
> + clock-names = "oscclk";
> + };
> + };
> +};
> +
> +#include "gs101-pinctrl.dtsi"
> --
> 2.43.0.rc2.451.g8631bc7472-goog
>
