Re: [PATCH v5 15/20] watchdog: s3c2410_wdt: Add support for WTCON register DBGACK_MASK bit

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Dec 1, 2023 at 10:11 AM Peter Griffin <peter.griffin@xxxxxxxxxx> wrote:
>
> The WDT uses the CPU core signal DBGACK to determine whether the SoC
> is running in debug mode or not. If the DBGACK signal is asserted and
> DBGACK_MASK bit is enabled, then WDT output and interrupt is masked
> (disabled).
>
> Presence of the DBGACK_MASK bit is determined by adding a new
> QUIRK_HAS_DBGACK_BIT quirk.
>
> Signed-off-by: Peter Griffin <peter.griffin@xxxxxxxxxx>
> ---
>  drivers/watchdog/s3c2410_wdt.c | 27 ++++++++++++++++++++++++---
>  1 file changed, 24 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
> index 0b4bd883ff28..39f3489e41d6 100644
> --- a/drivers/watchdog/s3c2410_wdt.c
> +++ b/drivers/watchdog/s3c2410_wdt.c
> @@ -34,9 +34,10 @@
>
>  #define S3C2410_WTCNT_MAXCNT   0xffff
>
> -#define S3C2410_WTCON_RSTEN    (1 << 0)
> -#define S3C2410_WTCON_INTEN    (1 << 2)
> -#define S3C2410_WTCON_ENABLE   (1 << 5)
> +#define S3C2410_WTCON_RSTEN            (1 << 0)
> +#define S3C2410_WTCON_INTEN            (1 << 2)
> +#define S3C2410_WTCON_ENABLE           (1 << 5)
> +#define S3C2410_WTCON_DBGACK_MASK      (1 << 16)

Suggest using BIT() macro. Btw, checkpatch with --strict option
suggests it too :)

>
>  #define S3C2410_WTCON_DIV16    (0 << 3)
>  #define S3C2410_WTCON_DIV32    (1 << 3)
> @@ -100,12 +101,17 @@
>   * %QUIRK_HAS_PMU_CNT_EN: PMU block has some register (e.g. CLUSTERx_NONCPU_OUT)
>   * with "watchdog counter enable" bit. That bit should be set to make watchdog
>   * counter running.
> + *
> + * %QUIRK_HAS_DBGACK_BIT: WTCON register has DBGACK_MASK bit. Setting the
> + * DBGACK_MASK bit disables the watchdog outputs when the SoC is in debug mode.
> + * Debug mode is determined by the DBGACK CPU signal.
>   */
>  #define QUIRK_HAS_WTCLRINT_REG                 (1 << 0)
>  #define QUIRK_HAS_PMU_MASK_RESET               (1 << 1)
>  #define QUIRK_HAS_PMU_RST_STAT                 (1 << 2)
>  #define QUIRK_HAS_PMU_AUTO_DISABLE             (1 << 3)
>  #define QUIRK_HAS_PMU_CNT_EN                   (1 << 4)
> +#define QUIRK_HAS_DBGACK_BIT                   (1 << 5)
>
>  /* These quirks require that we have a PMU register map */
>  #define QUIRKS_HAVE_PMUREG \
> @@ -375,6 +381,19 @@ static int s3c2410wdt_enable(struct s3c2410_wdt *wdt, bool en)
>         return 0;
>  }
>
> +static void s3c2410wdt_mask_dbgack(struct s3c2410_wdt *wdt)
> +{
> +       unsigned long wtcon;
> +
> +       if (!(wdt->drv_data->quirks & QUIRK_HAS_DBGACK_BIT))
> +               return;
> +
> +       /*  disable watchdog outputs if CPU is in debug mode */

Double whitespace in the comment. Also, I'd move this comment up to
the function declaration.

Other than that:

Reviewed-by: Sam Protsenko <semen.protsenko@xxxxxxxxxx>

> +       wtcon = readl(wdt->reg_base + S3C2410_WTCON);
> +       wtcon |= S3C2410_WTCON_DBGACK_MASK;
> +       writel(wtcon, wdt->reg_base + S3C2410_WTCON);
> +}
> +
>  static int s3c2410wdt_keepalive(struct watchdog_device *wdd)
>  {
>         struct s3c2410_wdt *wdt = watchdog_get_drvdata(wdd);
> @@ -700,6 +719,8 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
>         wdt->wdt_device.bootstatus = s3c2410wdt_get_bootstatus(wdt);
>         wdt->wdt_device.parent = dev;
>
> +       s3c2410wdt_mask_dbgack(wdt);
> +
>         /*
>          * If "tmr_atboot" param is non-zero, start the watchdog right now. Also
>          * set WDOG_HW_RUNNING bit, so that watchdog core can kick the watchdog.
> --
> 2.43.0.rc2.451.g8631bc7472-goog
>





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux