From: Michael Hennerich <michael.hennerich@xxxxxxxxxx>
This patch adds support for an external amplifier to be connected in a
gain of two configuration.
Signed-off-by: Michael Hennerich <michael.hennerich@xxxxxxxxxx>
Signed-off-by: Nuno Sa <nuno.sa@xxxxxxxxxx>
---
drivers/iio/dac/ad5791.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/iio/dac/ad5791.c b/drivers/iio/dac/ad5791.c
index a4167454da81..75b549827e15 100644
--- a/drivers/iio/dac/ad5791.c
+++ b/drivers/iio/dac/ad5791.c
@@ -345,6 +345,7 @@ static int ad5791_probe(struct spi_device *spi)
struct iio_dev *indio_dev;
struct ad5791_state *st;
int ret, pos_voltage_uv = 0, neg_voltage_uv = 0;
+ bool use_rbuf_gain2;
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
if (!indio_dev)
@@ -379,6 +380,12 @@ static int ad5791_probe(struct spi_device *spi)
st->pwr_down = true;
st->spi = spi;
+ if (pdata)
+ use_rbuf_gain2 = pdata->use_rbuf_gain2;
+ else
+ use_rbuf_gain2 = device_property_read_bool(&spi->dev,
+ "adi,rbuf-gain2-en");
+
if (!IS_ERR(st->reg_vss) && !IS_ERR(st->reg_vdd)) {
st->vref_mv = (pos_voltage_uv + neg_voltage_uv) / 1000;
st->vref_neg_mv = neg_voltage_uv / 1000;
@@ -398,7 +405,7 @@ static int ad5791_probe(struct spi_device *spi)
st->ctrl = AD5761_CTRL_LINCOMP(st->chip_info->get_lin_comp(st->vref_mv))
- | ((pdata && pdata->use_rbuf_gain2) ? 0 : AD5791_CTRL_RBUF) |
+ | (use_rbuf_gain2 ? 0 : AD5791_CTRL_RBUF) |
AD5791_CTRL_BIN2SC;
ret = ad5791_spi_write(st, AD5791_ADDR_CTRL, st->ctrl |
--
2.43.0
