On 28/11/2023 07:11, Jacky Huang wrote:
> From: Jacky Huang <ychuang3@xxxxxxxxxxx>
>
...
>
> sys: system-management@40460000 {
> - compatible = "nuvoton,ma35d1-reset";
> + compatible = "nuvoton,ma35d1-reset", "syscon";
> reg = <0x0 0x40460000 0x0 0x200>;
> #reset-cells = <1>;
> };
> @@ -95,6 +96,162 @@ clk: clock-controller@40460200 {
> clocks = <&clk_hxt>;
> };
>
> + pinctrl: pinctrl@40040000 {
> + compatible = "nuvoton,ma35d1-pinctrl";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + nuvoton,sys = <&sys>;
> + ranges = <0x0 0x0 0x40040000 0xc00>;
> +
> + gpioa: gpio@40040000 {
> + reg = <0x0 0x40>;
Your unit address does not match reg.
You must test your DTS with `dtbs_check W=1`.
> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk GPA_GATE>;
> + gpio-controller;
> + #gpio-cells = <2>;
Best regards,
Krzysztof
