From: Martin Botka <martin.botka@xxxxxxxxxxxxxx>
This controller is similar to the H6, but covers four sensors and uses
slightly different calibration methods.
Also the H616 requires to poke a bit in the SYS_CFG register range for
correct operation, so add a "syscon" phandle property to point there.
Signed-off-by: Martin Botka <martin.botka@xxxxxxxxxxxxxx>
Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx>
---
.../thermal/allwinner,sun8i-a83t-ths.yaml | 30 ++++++++++++-------
1 file changed, 20 insertions(+), 10 deletions(-)
diff --git a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
index fbd4212285e28..95a6ab9a5889b 100644
--- a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
+++ b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
@@ -20,6 +20,7 @@ properties:
- allwinner,sun50i-a100-ths
- allwinner,sun50i-h5-ths
- allwinner,sun50i-h6-ths
+ - allwinner,sun50i-h616-ths
clocks:
minItems: 1
@@ -63,6 +64,7 @@ allOf:
enum:
- allwinner,sun50i-a100-ths
- allwinner,sun50i-h6-ths
+ - allwinner,sun50i-h616-ths
then:
properties:
@@ -80,6 +82,18 @@ allOf:
clock-names:
minItems: 2
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: allwinner,sun50i-h616-ths
+
+ then:
+ properties:
+ syscon:
+ maxItems: 1
+ description: phandle to syscon device allowing access to SYS_CFG registers
+
- if:
properties:
compatible:
@@ -97,16 +111,12 @@ allOf:
const: 1
- if:
- properties:
- compatible:
- contains:
- enum:
- - allwinner,sun8i-h3-ths
- - allwinner,sun8i-r40-ths
- - allwinner,sun50i-a64-ths
- - allwinner,sun50i-a100-ths
- - allwinner,sun50i-h5-ths
- - allwinner,sun50i-h6-ths
+ not:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - allwinner,sun8i-a83t-ths
then:
required:
--
2.35.8
