Hi Cyril,
Am 27.11.23 um 14:02 schrieb Cyril Brulebois:
Stefan Wahren <wahrenst@xxxxxxx> (2023-11-27):
Could you please provide the following information:
- settings of config.txt
Here you go:
arm_64bit=1
enable_uart=1
upstream_kernel=1
kernel=vmlinuz-6.6.0+
initramfs initrd.img-6.6.0+
enable_jtag_gpio=1
force_turbo=1
- VC firmware version
This is pieeprom-2023-01-11.bin
I know there's pieeprom-2023-05-11.bin as well, but I've been keeping
the former as a constant throughout the PCIe patch series testing once
I realized how critical it was (old beta EEPROM versions found in some
CM4s made everything much harder initially).
Sorry, i was a little bit unspecific. This the first level bootloader
stored in the EEPROM. I meant the VC firmware version from the SD card
which is logged in dmesg:
raspberrypi-firmware soc:firmware: Attached to firmware from ...
In case the config matters:
[all]
BOOT_UART=0
WAKE_ON_GPIO=1
POWER_OFF_ON_HALT=0
BOOT_ORDER=0xf25641
ENABLE_SELF_UPDATE=1
- did you use arm64/defconfig or something special?
I'm using a “distribution config”, starting from the latest arm64 config
found in Debian unstable (6.5.10-1), and applying `make oldconfig`.
You'll find it attached.
Thanks
Cheers,
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
