On Sun, Oct 22, 2023 at 11:19:10AM -0500, Adam Ford wrote: > The NPU is based on the Vivante GC8000 and its power-domain > is controlled my pgc_mlmix. Since the power-domain uses > some of these clocks, setup the clock parent and rates > inside the power-domain, and add the NPU node. > > The data sheet states the CLK_ML_AHB should be 300MHz for > nominal, but 800MHz clock will divide down to 266 instead. > Boards which operate in over-drive mode should update the > clocks on their boards accordingly. When the driver loads, > the NPU numerates as: > > etnaviv-gpu 38500000.npu: model: GC8000, revision: 8002 > > Signed-off-by: Adam Ford <aford173@xxxxxxxxx> Applied, thanks!
