Hello,
On Tue, Jan 13, 2015 at 06:14:17PM -0800, Ray Jui wrote:
> >> + irq = platform_get_irq(pdev, 0);
> >> + if (irq < 0) {
> > irq == 0 should be handled as error, too.
> >
> Ah. I thought zero is a valid global interrupt number, and I see other
> drivers checking against < 0 as well. Is my understanding incorrect?
These are wrong, too. 0 should never be a valid interrupt number. There
are some exceptions but mostly for historic reasons. The right handling
is used for example in drivers/i2c/busses/i2c-efm32.c.
> >> + dev_err(dev->device, "no irq resource\n");
> >> + return irq;
> >> + }
> [...]
> >> +static int bcm_iproc_i2c_remove(struct platform_device *pdev)
> >> +{
> >> + struct bcm_iproc_i2c_dev *dev = platform_get_drvdata(pdev);
> >> +
> >> + i2c_del_adapter(&dev->adapter);
> >> + bcm_iproc_i2c_disable(dev);
> > I think you have a problem here if bcm_iproc_i2c_remove is called while
> > an irq is still being serviced. I'm not sure how to prevent this
> > properly for a shared interrupt.
> >
> Can I grab i2c_lock_adapter to ensure the bus is locked (so there's no
> outstanding transactions or IRQs by the time we remove the adapter)? But
> I see no I2C bus driver does this in their remove function...
The problem I pointed out is the reason for some driver authors not to
use devm_request_irq. If you use plain request_irq and the matching
free_irq in the .remove callback you can be sure that the irq isn't
running any more as soon as free_irq returns.
BTW, if you use vim, you can add
set cinoptions=(,:
if has("autocmd")
filetype plugin indent on
endif
to your .vimrc. Then while typing vim does the indention right and
consistent, and with the = command you can reindent.
Best regards
Uwe
--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
