This patchset contains the initial I2C support for Broadcom iProc family of SoCs. The iProc I2C controller has separate internal TX and RX FIFOs, each has a size of 64 bytes. The iProc I2C controller supports two bus speeds including standard mode (100 kHz) and fast mode (400 kHz) Changes from v2: - Have the I2C driver default to y so it does not need to be selected from ARCH_BCM_IPROC. This also helps to get rid of one patch. The driver still depends on ARCH_BCM_IPROC - Get rid of redundant check on resource returned by platform_get_resource Changes from v1: - Fix function argument parenthesis - Get rid of redundant driver owner field Ray Jui (3): i2c: iProc: define Broadcom iProc I2C binding i2c: iproc: Add Broadcom iProc I2C Driver ARM: dts: add I2C device nodes for Broadcom Cygnus .../devicetree/bindings/i2c/brcm,iproc-i2c.txt | 37 ++ arch/arm/boot/dts/bcm-cygnus.dtsi | 20 + drivers/i2c/busses/Kconfig | 10 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-bcm-iproc.c | 500 ++++++++++++++++++++ 5 files changed, 568 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt create mode 100644 drivers/i2c/busses/i2c-bcm-iproc.c -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html