Add support for a DSI output on VDOSYS0. Luckily, there is a new
feature to support dynamic selections of the output (connector).
Use it to add support for a DSI output.
Apart from that, this is pretty straghtforward by just adding new
compatibles and add the correct DSI nodes to the SoC dtsi.
This was tested with a Toshiba TC358775 DSI-to-LVDS bridge and
three different panels. Please note, that the driver for this
bridge doesn't work well and needs a more or less complete rework,
which will be posted on a separate series.
Michael Walle (4):
dt-bindings: display: mediatek: dsi: add compatible for MediaTek
MT8195
dt-bindings: phy: add compatible for Mediatek MT8195
arm64: dts: mediatek: mt8195: add DSI and MIPI DPHY nodes
drm/mediatek: support the DSI0 output on the MT8195 VDOSYS0
.../display/mediatek/mediatek,dsi.yaml | 4 ++
.../bindings/phy/mediatek,dsi-phy.yaml | 1 +
arch/arm64/boot/dts/mediatek/mt8195.dtsi | 48 +++++++++++++++++++
drivers/gpu/drm/mediatek/mtk_drm_drv.c | 8 +++-
4 files changed, 60 insertions(+), 1 deletion(-)
--
2.39.2
