@Andrew getting warning as part of below check . Need to explore more why this is coming .
below warning is coming becuase of " interrupt-names = "macirq", "eth_lpi", "safety";" safety added here . If I remove safety they warning gone.
Looks like we have to define property "safety" somewhere else as well . I have already added safety in "interrupt-names:" list but still no help .
# make DT_CHECKER_FLAGS=-m DT_SCHEMA_FILES=net/qcom,ethqos.yaml dt_binding_check
LINT Documentation/devicetree/bindings
invalid config: unknown option "required" for rule "quoted-strings"
xargs: /usr/bin/yamllint: exited with status 255; aborting
CHKDT Documentation/devicetree/bindings/processed-schema.json
SCHEMA Documentation/devicetree/bindings/processed-schema.json
DTEX Documentation/devicetree/bindings/net/qcom,ethqos.example.dts
DTC_CHK Documentation/devicetree/bindings/net/qcom,ethqos.example.dtb
/local/mnt/workspace/andrew/linux-next/Documentation/devicetree/bindings/net/qcom,ethqos.example.dtb: ethernet@7a80000: interrupt-names:2: 'eth_lpi' was expected
from schema $id: http://devicetree.org/schemas/net/qcom,ethqos.yaml#
/local/mnt/workspace/andrew/linux-next/Documentation/devicetree/bindings/net/qcom,ethqos.example.dtb: ethernet@7a80000: Unevaluated properties are not allowed ('mdio', 'phy-handle', 'phy-mode', 'rx-fifo-depth', 'snps,reset-active-low', 'snps,reset-delays-us', 'snps,reset-gpio', 'snps,tso', 'tx-fifo-depth' were unexpected)
from schema $id: http://devicetree.org/schemas/net/qcom,ethqos.yaml#
On 11/23/2023 5:23 PM, Suraj Jaiswal wrote:
> Add binding doc for fault IRQ. The fault IRQ will be
> triggered for ECC, DPP, FSM error.
>
> Signed-off-by: Suraj Jaiswal <quic_jsuraj@xxxxxxxxxxx>
> ---
> Documentation/devicetree/bindings/net/qcom,ethqos.yaml | 7 +++++--
> 1 file changed, 5 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml
> index 7bdb412a0185..e013cb51fb07 100644
> --- a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml
> +++ b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml
> @@ -37,12 +37,14 @@ properties:
> items:
> - description: Combined signal for various interrupt events
> - description: The interrupt that occurs when Rx exits the LPI state
> + - description: The interrupt that occurs when HW fault occurs
>
> interrupt-names:
> minItems: 1
> items:
> - const: macirq
> - const: eth_lpi
> + - const: safety
>
> clocks:
> maxItems: 4
> @@ -89,8 +91,9 @@ examples:
> <&gcc GCC_ETH_PTP_CLK>,
> <&gcc GCC_ETH_RGMII_CLK>;
> interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-names = "macirq", "eth_lpi";
> + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "macirq", "eth_lpi", "safety";
>
> rx-fifo-depth = <4096>;
> tx-fifo-depth = <4096>;
