Add binding doc for fault IRQ. The fault IRQ will be
trigger for ECC,DPP,FSM error.
Signed-off-by: Suraj Jaiswal <quic_jsuraj@xxxxxxxxxxx>
---
Documentation/devicetree/bindings/net/qcom,ethqos.yaml | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml
index 7bdb412a0185..e013cb51fb07 100644
--- a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml
+++ b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml
@@ -37,12 +37,14 @@ properties:
items:
- description: Combined signal for various interrupt events
- description: The interrupt that occurs when Rx exits the LPI state
+ - description: The interrupt that occurs when HW fault occurs
interrupt-names:
minItems: 1
items:
- const: macirq
- const: eth_lpi
+ - const: safety
clocks:
maxItems: 4
@@ -89,8 +91,9 @@ examples:
<&gcc GCC_ETH_PTP_CLK>,
<&gcc GCC_ETH_RGMII_CLK>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq", "eth_lpi";
+ <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq", "eth_lpi", "safety";
rx-fifo-depth = <4096>;
tx-fifo-depth = <4096>;
--
2.25.1
