Re: [PATCH v2 06/17] iommu: Add iommu_fwspec_alloc/dealloc()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Nov 19, 2023 at 06:19:43PM +0900, Hector Martin wrote:
> >> +static int iommu_fwspec_assign_iommu(struct iommu_fwspec *fwspec,
> >> +				     struct device *dev,
> >> +				     struct fwnode_handle *iommu_fwnode)
> >> +{
> >> +	const struct iommu_ops *ops;
> >> +
> >> +	if (fwspec->iommu_fwnode) {
> >> +		/*
> >> +		 * fwspec->iommu_fwnode is the first iommu's fwnode. In the rare
> >> +		 * case of multiple iommus for one device they must point to the
> >> +		 * same driver, checked via same ops.
> >> +		 */
> >> +		ops = iommu_ops_from_fwnode(iommu_fwnode);
> > 
> > This carries over a related bug from the original code: If a device has
> > two IOMMUs and the first one probes but the second one defers, ops will
> > be NULL here and the check will fail with EINVAL.
> > 
> > Adding a check for that case here fixes it:
> > 
> > 		if (!ops)
> > 			return driver_deferred_probe_check_state(dev);

Yes!

> > With that, for the whole series:
> > 
> > Tested-by: Hector Martin <marcan@xxxxxxxxx>
> > 
> > I can't specifically test for the probe races the series intends to fix
> > though, since that bug we only hit extremely rarely. I'm just testing
> > that nothing breaks.
> 
> Actually no, this fix is not sufficient. If the first IOMMU is ready
> then the xlate path allocates dev->iommu, which then
> __iommu_probe_device takes as a sign that all IOMMUs are ready and does
> the device init.

It doesn't.. The code there is:

	if (!fwspec && dev->iommu)
		fwspec = dev->iommu->fwspec;
	if (fwspec)
		ops = fwspec->ops;
	else
		ops = dev->bus->iommu_ops;
	if (!ops) {
		ret = -ENODEV;
		goto out_unlock;
	}

Which is sensitive only to !NULL fwspec, and if EPROBE_DEFER is
returned fwspec will be freed and dev->iommu->fwspec will be NULL
here.

In the NULL case it does a 'bus probe' with a NULL fwspec and all the
fwspec drivers return immediately from their probe functions.

Did I miss something?

> Then when the xlate comes along again after suceeding
> with the second IOMMU, __iommu_probe_device sees the device is already
> in a group and never initializes the second IOMMU, leaving the device
> with only one IOMMU.

This should be fixed by the first hunk to check every iommu and fail?

BTW, do you have a systems with same device attached to multiple
iommus?

I've noticed another bug here, many drivers don't actually support
differing iommu instances and nothing seems to check it..

Thanks,
Jason




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux