Re: [PATCH 15/16] arm64: dts: qcom: sm8550-aim300: add pmic glink port/endpoints

[Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>]

On 17/11/2023 12:18, Tengfei Fan wrote:
> Add nodes to support Type-C USB/DP functionality.
>
> On this platform, a Type-C redriver is added to the SuperSpeed graph.
>
> Signed-off-by: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
> ---
>   arch/arm64/boot/dts/qcom/sm8550-aim300.dts | 88 +++++++++++++++++++++-
>   1 file changed, 87 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8550-aim300.dts b/arch/arm64/boot/dts/qcom/sm8550-aim300.dts
> index 6dc3040b9f76..f3c558dd40f1 100644
> --- a/arch/arm64/boot/dts/qcom/sm8550-aim300.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8550-aim300.dts
> @@ -100,7 +100,15 @@
>   					reg = <1>;
>   
>   					pmic_glink_ss_in: endpoint {
> -						remote-endpoint = <&usb_1_dwc3_ss>;
> +						remote-endpoint = <&redriver_ss_out>;
> +					};
> +				};
> +
> +				port@2 {
> +					reg = <2>;
> +
> +					pmic_glink_sbu: endpoint {
> +						remote-endpoint = <&fsa4480_sbu_mux>;
>   					};
>   				};
>   			};
> @@ -519,6 +527,62 @@
>   	};
>   };
>   
> +&i2c_master_hub_0 {
> +	status = "okay";
> +};
> +
> +&i2c_hub_2 {
> +	status = "okay";
> +
> +	typec-mux@42 {
> +		compatible = "fcs,fsa4480";
> +		reg = <0x42>;
> +
> +		vcc-supply = <&vreg_bob1>;
> +
> +		mode-switch;
> +		orientation-switch;
> +
> +		port {
> +			fsa4480_sbu_mux: endpoint {
> +				remote-endpoint = <&pmic_glink_sbu>;
> +			};
> +		};
> +	};
> +
> +	typec-retimer@1c {
> +		compatible = "onnn,nb7vpq904m";
> +		reg = <0x1c>;
> +
> +		vcc-supply = <&vreg_l15b_1p8>;
> +
> +		orientation-switch;
> +		retimer-switch;
> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port@0 {
> +				reg = <0>;
> +
> +				redriver_ss_out: endpoint {
> +					remote-endpoint = <&pmic_glink_ss_in>;
> +				};
> +			};
> +
> +			port@1 {
> +				reg = <1>;
> +
> +				redriver_ss_in: endpoint {
> +					data-lanes = <3 2 1 0>;
> +					remote-endpoint = <&usb_dp_qmpphy_out>;
> +				};
> +			};
> +		};
> +	};
> +};
> +
>   &gcc {
>   	clocks = <&bi_tcxo_div2>, <&sleep_clk>,
>   		 <&pcie0_phy>,
> @@ -552,6 +616,16 @@
>   	status = "okay";
>   };
>   
> +&mdss_dp0 {
> +	status = "okay";
> +};
> +
> +&mdss_dp0_out {
> +	data-lanes = <0 1>;

Why? Are you really limited to two lanes for DP by the hardware?

> +	remote-endpoint = <&usb_dp_qmpphy_dp_in>;
> +};
> +
> +
>   &mdss_dsi0 {
>   	vdda-supply = <&vreg_l3e_1p2>;
>   	status = "okay";
> @@ -861,6 +935,18 @@
>   	status = "okay";
>   };
>   
> +&usb_dp_qmpphy_dp_in {
> +	remote-endpoint = <&mdss_dp0_out>;
> +};
> +
> +&usb_dp_qmpphy_out {
> +	remote-endpoint = <&redriver_ss_in>;
> +};
> +
> +&usb_dp_qmpphy_usb_ss_in {
> +	remote-endpoint = <&usb_1_dwc3_ss>;
> +};
> +
>   &xo_board {
>   	clock-frequency = <76800000>;
>   };

--
With best wishes
Dmitry