On 16/11/2023 15:01, Kory Maincent wrote:
> Add a new driver for the PD692x0 I2C Power Sourcing Equipment controller.
> This driver only support i2c communication for now.
>
> Signed-off-by: Kory Maincent <kory.maincent@xxxxxxxxxxx>
> ---
> MAINTAINERS | 1 +
> drivers/net/pse-pd/Kconfig | 11 +
> drivers/net/pse-pd/Makefile | 1 +
> drivers/net/pse-pd/pd692x0.c | 1049 ++++++++++++++++++++++++++++++++++++++++++
> 4 files changed, 1062 insertions(+)
....
> +
> +err_fw_unregister:
> + firmware_upload_unregister(priv->fwl);
> + return ret;
> +}
> +
> +static void pd692x0_i2c_remove(struct i2c_client *client)
> +{
> + struct pd692x0_priv *priv = i2c_get_clientdata(client);
> +
> + firmware_upload_unregister(priv->fwl);
> +}
> +
> +static const struct i2c_device_id pd692x0_id[] = {
> + { PD692X0_PSE_NAME, 0 },
> + { },
> +};
> +MODULE_DEVICE_TABLE(i2c, pd692x0_id);
> +
> +static const struct of_device_id pd692x0_of_match[] = {
> + { .compatible = "microchip,pd69200", },
> + { .compatible = "microchip,pd69210", },
> + { .compatible = "microchip,pd69220", },
So they are the same from driver point of view.
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, pd692x0_of_match);
> +
> +static struct i2c_driver pd692x0_driver = {
> + .probe = pd692x0_i2c_probe,
> + .remove = pd692x0_i2c_remove,
> + .id_table = pd692x0_id,
> + .driver = {
> + .name = PD692X0_PSE_NAME,
> + .of_match_table = of_match_ptr(pd692x0_of_match),
Drop of_match_ptr, leads to warnings.
Best regards,
Krzysztof
