Re: [PATCH 1/2] riscv: dts: cv1800b: add pinctrl node for cv1800b

[Chen Wang <unicorn_wang@xxxxxxxxxxx>]

On 2023/11/13 8:57, Jisheng Zhang wrote:
> Add the reset device tree node to cv1800b SoC reusing the
> pinctrl-single driver.
>
> Signed-off-by: Jisheng Zhang <jszhang@xxxxxxxxxx>
> ---
>   arch/riscv/boot/dts/sophgo/cv-pinctrl.h | 19 +++++++++++++++++++
>   arch/riscv/boot/dts/sophgo/cv1800b.dtsi | 10 ++++++++++
>   2 files changed, 29 insertions(+)
>   create mode 100644 arch/riscv/boot/dts/sophgo/cv-pinctrl.h


I'm afraid there will not be more cv* chip in coming days. So I would 
suggest you use "cv1800b-pinctrl.h" first here. If we see more cv* 
coming, and if they will reuse the definition here, we can consider 
optimize the filename, what do you think?

BTW, how about defining the file name as "cv1800b.h" and I'm not sure if 
you will have more macro const definition for other modules?

> diff --git a/arch/riscv/boot/dts/sophgo/cv-pinctrl.h b/arch/riscv/boot/dts/sophgo/cv-pinctrl.h
> new file mode 100644
> index 000000000000..ed78b6fb3142
> --- /dev/null
> +++ b/arch/riscv/boot/dts/sophgo/cv-pinctrl.h
> @@ -0,0 +1,19 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * This header provides constants for pinctrl bindings for Sophgo CV* SoC.
> + *
> + * Copyright (C) 2023 Jisheng Zhang <jszhang@xxxxxxxxxx>
> + */
> +#ifndef _DTS_RISCV_SOPHGO_CV_PINCTRL_H
> +#define _DTS_RISCV_SOPHGO_CV_PINCTRL_H
> +
> +#define MUX_M0		0
> +#define MUX_M1		1
> +#define MUX_M2		2
> +#define MUX_M3		3
> +#define MUX_M4		4
> +#define MUX_M5		5
> +#define MUX_M6		6
> +#define MUX_M7		7
> +
> +#endif
> diff --git a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
> index e04df04a91c0..7a44d8e8672b 100644
> --- a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
> +++ b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
> @@ -6,6 +6,8 @@
>   #include <dt-bindings/interrupt-controller/irq.h>
>   #include <dt-bindings/reset/sophgo,cv1800b-reset.h>
>   
> +#include "cv-pinctrl.h"
> +
>   / {
>   	compatible = "sophgo,cv1800b";
>   	#address-cells = <1>;
> @@ -55,6 +57,14 @@ soc {
>   		dma-noncoherent;
>   		ranges;
>   
> +		pinctrl0: pinctrl@3001000 {
> +			compatible = "pinctrl-single";
> +			reg = <0x3001000 0x130>;
> +			#pinctrl-cells = <1>;
> +			pinctrl-single,register-width = <32>;
> +			pinctrl-single,function-mask = <0x00000007>;
> +		};
> +
>   		rst: reset-controller@3003000 {
>   			compatible = "sophgo,cv1800b-reset";
>   			reg = <0x03003000 0x1000>;