Re: [PATCH 9/9] arm64: dts: qcom: qcm6490-fairphone-fp5: Enable WiFi

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon Nov 13, 2023 at 1:22 PM CET, Kalle Valo wrote:
> (adding ath11k list)
>
> Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> writes:
>
> > [Added Kalle to the CC list]
> >
> > On Tue, 31 Oct 2023 at 12:31, Luca Weiss <luca.weiss@xxxxxxxxxxxxx> wrote:
> >>
> >> On Mon Oct 30, 2023 at 8:26 PM CET, Konrad Dybcio wrote:
> >> > On 27.10.2023 16:20, Luca Weiss wrote:
> >> > > Now that the WPSS remoteproc is enabled, enable wifi so we can use it.
> >> > >
> >> > > Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
> >> > > ---
> >> > >  arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts | 4 ++++
> >> > >  1 file changed, 4 insertions(+)
> >> > >
> >> > > diff --git a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
> >> > > index d65eef30091b..e7e20f73cbe6 100644
> >> > > --- a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
> >> > > +++ b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
> >> > > @@ -713,3 +713,7 @@ &venus {
> >> > >     firmware-name = "qcom/qcm6490/fairphone5/venus.mbn";
> >> > >     status = "okay";
> >> > >  };
> >> > > +
> >> > > +&wifi {
> >> > > +   status = "okay";
> >> > qcom,ath11k-calibration-variant?
> >>
> >> What value would I put there for my device? Based on existing usages
> >> (mostly for ath10k) I'd say "Fairphone_5"?
> >
> > I think this is fine.
>
> From style point of view I would prefer lower case and dashes, for
> example "fairphone-5" but I'm just nitpicking, uppercase and underscores
> work fine as well.

I really don't mind, but I used "Fairphone_5" in v2 now, but I can
change it for v3 if that happens if you wish.

>
> If you have different SKUs or similar which need different ath11k board
> files being more specific like "fairphone-5-eu" and "fairphone-5-us" is
> one option. But I'm sure Luca knows best what is needed for Fairphone,
> just throwing out ideas here.

As far as I am aware, there's only one hardware variant, so nothing
extra should be needed there. (We also only really sell in Europe, apart
from a small rollout in Taiwan and a trial in the US, but same HW there)

Regards
Luca

>
> >> And you mean I should add this property in dts before even looking into
> >> the firmware/calibration side of it?
> >
> > From my experience some (most?) of the device manufacturers do the
> > wrong thing here. They do not program a sensible board_id, leaving it
> > as 0xff or some other semi-random value. The calibration variant is
> > the only way for the kernel to distinguish between such poor devices.
> >
> > The kernel will do a smart thing though. If the device-specific
> > calibration data is not present, it will try to fall back to the
> > generic data.
>
> You are correct, just to be specific it's ath11k which will choose which
> board file to use. I recommend always setting
> qcom,ath11k-calibration-variant in DTS if you can.
>
> Back in the day I have tried to push for the firmware team to improve
> the board file selection but no success. So the only practical solution
> we have is qcom,ath11k-calibration-variant in DTS.






[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux