Re: [PATCH V2 4/4] arm64: dts: rockchip: add Powkiddy RK2023

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 09/11/2023 22:50, Chris Morgan wrote:
> From: Chris Morgan <macromorgan@xxxxxxxxxxx>
> 
> Add support for the Powkiddy RK2023. The Powkiddy RK2023 is a handheld
> gaming device with a 3.5 inch screen powered by the Rockchip RK3566
> SoC. The device is almost identical to the Anbernic RG353P except it
> lacks eMMC, a function button, a touch screen, no UART headers on the
> board, and the panel has slightly different timings.
> 
> Signed-off-by: Chris Morgan <macromorgan@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/rockchip/Makefile         |   1 +
>  .../dts/rockchip/rk3566-powkiddy-rk2023.dts   | 161 ++++++++++++++++++
>  2 files changed, 162 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dts
> 
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index a18f33bf0c0e..f969618da352 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -78,6 +78,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg503.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-rgb30.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-rk2023.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-radxa-cm3-io.dtb
> diff --git a/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dts b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dts
> new file mode 100644
> index 000000000000..5740412f6b2b
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dts
> @@ -0,0 +1,161 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/pinctrl/rockchip.h>
> +#include "rk3566-anbernic-rg353x.dtsi"
> +
> +/ {
> +	model = "RK2023";
> +	compatible = "powkiddy,rk2023", "rockchip,rk3566";
> +
> +	aliases {
> +		mmc1 = &sdmmc0;
> +		mmc2 = &sdmmc1;
> +		mmc3 = &sdmmc2;
> +	};
> +
> +	battery: battery {
> +		compatible = "simple-battery";
> +		charge-full-design-microamp-hours = <3151000>;
> +		charge-term-current-microamp = <300000>;
> +		constant-charge-current-max-microamp = <2000000>;
> +		constant-charge-voltage-max-microvolt = <4250000>;
> +		factory-internal-resistance-micro-ohms = <117000>;
> +		voltage-max-design-microvolt = <4172000>;
> +		voltage-min-design-microvolt = <3400000>;
> +
> +		ocv-capacity-celsius = <20>;
> +		ocv-capacity-table-0 =  <4172000 100>, <4092000 95>, <4035000 90>, <3990000 85>,
> +					<3939000 80>, <3895000 75>, <3852000 70>, <3807000 65>,
> +					<3762000 60>, <3713000 55>, <3672000 50>, <3647000 45>,
> +					<3629000 40>, <3613000 35>, <3598000 30>, <3578000 25>,
> +					<3550000 20>, <3519000 15>, <3479000 10>, <3438000 5>,
> +					<3400000 0>;
> +	};
> +
> +	/* Channels reversed for headphones. */
> +	sound {
> +		compatible = "simple-audio-card";
> +		simple-audio-card,name = "rk817_int";
> +		simple-audio-card,format = "i2s";
> +		simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
> +		simple-audio-card,mclk-fs = <256>;
> +		simple-audio-card,widgets =
> +			"Microphone", "Mic Jack",
> +			"Headphone", "Headphones",
> +			"Speaker", "Internal Speakers";
> +		simple-audio-card,routing =
> +			"MICL", "Mic Jack",
> +			"Headphones", "HPOL",
> +			"Headphones", "HPOR",
> +			"Internal Speakers", "SPKO";
> +
> +		simple-audio-card,codec {
> +			sound-dai = <&rk817>;
> +		};
> +
> +		simple-audio-card,cpu {
> +			sound-dai = <&i2s1_8ch>;
> +		};
> +	};
> +
> +};
> +
> +/delete-node/ &adc_keys;
> +
> +&chosen {
> +	/delete-property/ stdout-path;
> +};

If you have to delete so many nodes and properties, this means your
common DTSI is not that common.

Common DTSI means there is shared hardware. If you take shared hardware
and put it into another board, pieces of the shared hardware do not
disappear.


Best regards,
Krzysztof





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux