Re: [PATCH v4 2/2] hwmon: pmbus: Add ltc4286 driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11/9/23 09:27, Guenter Roeck wrote:
On 11/8/23 17:49, Delphine CC Chiu wrote:

+        info->m[PSC_POWER] = temp_setting;
+    } else {
+        info->m[PSC_POWER] = rsense;

I told you before, the default range needs to be set. The range may have been
changed by the BIOS/ROMMON, or someone could have changed it manually with
i2cset or some other application, or some other operating system was loaded
earlier which did its own setting.

I do understand by now that you don't want to do that, but I won't accept
the driver without it, sorry.


As a follow-up on this, it turns out that LTC4287 supports an external EEPROM to
store its configuration as well as "STORE_USER_ALL" and "RESTORE_USER_ALL"
PMBus commands. It is therefore very well possible and even likely that the
voltage range (together with other configurable parameters) was set during
system production.

With that in mind, it seems to me that not only the default (property not present)
case has to be handled, but that a boolean property to reflect the voltage range
is insufficient. I think what is needed instead is a property which specifies
the requested range and which, if not present, explicitly means "use whatever
is currently programmed into the chip".

Thanks,
Guenter





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux