This series adds support to provide refclk to endpoint even in low
power states.
Due to some platform specific issues with CLKREQ signal, it is not being
propagated to the host and as host doesn't know the clkreq signal host is
not sending refclk. Due to this endpoint is seeing linkdown and going
to bad state.
To avoid those ref clk should be provided always to the endpoint. The
issue is coming only when ep intiates the L1.1 or L1.2 exit and clkreq
is not being propagated properly to the host.
Signed-off-by: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
---
Krishna chaitanya chundru (2):
dt-bindings: phy: qcom,qmp: Add PCIe qcom,refclk-always-on property
phy: qcom-qmp-pcie: Add support for keeping refclk always on
.../bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml | 5 +++++
drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 21 +++++++++++++++++----
2 files changed, 22 insertions(+), 4 deletions(-)
---
base-commit: 71e68e182e382e951d6248bccc3c960dcec5a718
change-id: 20231106-refclk_always_on-9beae8297cb8
Best regards,
--
Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
