[PATCH v1] ARM: dts: imx: tqma7: add lm75a sensor (rev. 01xxx)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: João Rodrigues <jrodrigues@xxxxxxxxxx>

TQMa7x (revision 01xxx) uses a LM75A temperature sensor.
The two sensors use different I2C addresses, so we can set both sensors
simultaneously.

Signed-off-by: João Rodrigues <jrodrigues@xxxxxxxxxx>
---
 arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
index fe42b0a4683..3fc3130f9de 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
@@ -128,11 +128,16 @@ vgen6_reg: vldo4 {
 		};
 	};
 
-	/* NXP SE97BTP with temperature sensor + eeprom */
+	/* LM75A temperature sensor, TQMa7x 01xx */
+	lm75a: temperature-sensor@48 {
+		compatible = "national,lm75a";
+		reg = <0x48>;
+	};
+
+	/* NXP SE97BTP with temperature sensor + eeprom, TQMa7x 02xx */
 	se97b: temperature-sensor-eeprom@1e {
 		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1e>;
-		status = "okay";
 	};
 
 	/* ST M24C64 */
-- 
2.25.1






[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux