On Mon, Oct 30, 2023 at 02:33:33PM -0400, Frank Li wrote:
> On Fri, Oct 20, 2023 at 11:56:43PM +0530, Manivannan Sadhasivam wrote:
> > On Fri, Oct 20, 2023 at 02:07:02PM -0400, Frank Li wrote:
> > > On Fri, Oct 20, 2023 at 11:31:39PM +0530, Manivannan Sadhasivam wrote:
> > > > On Fri, Oct 20, 2023 at 11:23:04PM +0530, Manivannan Sadhasivam wrote:
> > > > > On Mon, Sep 11, 2023 at 06:09:19PM -0400, Frank Li wrote:
> > > > > > Using bit 0..7 of magic as version number in pci_endpoint_test struct to
> > > > > > support older driver versions. Save to 'version' field of struct
> > > > > > pci_endpoint_test to prevent reading non-existent address.
> > > > > >
> > > > >
> > > > > Since both drivers are in the kernel, I don't see a necessity to maintain
> > > > > compatibility. Does it make sense to load drivers of previous kernel revision
> > > > > with a new kernel?
> > > > >
> > > >
> > > > Shoot... Sorry, I completely forgot that one is EP and another is host. Yes, we
> > > > do need to maintain compatibility.
> > > >
> > > > But can't we use the doorbell register contents to determine that?
> > >
> > > Doorbell register is not exist at old EP driver. If old EP driver register
> > > size is 64Byte, doorbell register is 64 - 68.
> > >
> >
> > Yes, I know!
> >
> > > Read unexisted, or unmapped space will cause kernel dump or other side
> > > effects.
> > >
> >
> > For sure it won't be unmapped as the BAR0 size is 512B. I thought we could infer
> > something from the uninitialized registers. I need to think about other options.
> > But changing the semantics of MAGIC register is a no-go.
>
> @Mani:
>
> Any other options? I plan respin these patches soon
>
Nothing looks feasible to me. Kishon, any suggestion from your side?
In the worst case, I'd suggest to show a disclaimer that it is not compatible
with endpoints supporting older kernel revision and proceed. But let's wait for
Kishon.
- Mani
> Frank
>
> >
> > - Mani
> >
> > > Frank
> > >
> > > >
> > > > - Mani
> > > >
> > > > > > Add three registers: PCIE_ENDPOINT_TEST_DB_BAR, PCIE_ENDPOINT_TEST_DB_ADDR,
> > > > > > PCIE_ENDPOINT_TEST_DB_DATA.
> > > > > >
> > > > >
> > > > > This patch is not adding these registers and not this driver also. So this
> > > > > statement is wrong.
> > > > >
> > > > > > Write data from PCI_ENDPOINT_TEST_DB_DATA to address from
> > > > > > PCI_ENDPOINT_TEST_DB_ADDR to trigger doorbell and wait for endpoint
> > > > > > feedback.
> > > > > >
> > > > >
> > > > > You can reuse a part of the commit description I suggested for previous patch.
> > > > >
> > > > > Rest looks good to me.
> > > > >
> > > > > - Mani
> > > > >
> > > > > > Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
> > > > > > ---
> > > > > > drivers/misc/pci_endpoint_test.c | 48 ++++++++++++++++++++++++++++++++
> > > > > > include/uapi/linux/pcitest.h | 1 +
> > > > > > 2 files changed, 49 insertions(+)
> > > > > >
> > > > > > diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c
> > > > > > index ed4d0ef5e5c31..ed0b025132d17 100644
> > > > > > --- a/drivers/misc/pci_endpoint_test.c
> > > > > > +++ b/drivers/misc/pci_endpoint_test.c
> > > > > > @@ -33,6 +33,8 @@
> > > > > > #define IRQ_TYPE_MSIX 2
> > > > > >
> > > > > > #define PCI_ENDPOINT_TEST_MAGIC 0x0
> > > > > > +#define PCI_MAGIC_VERSION_MASK GENMASK(7, 0)
> > > > > > +#define PCI_ENDPOINT_TEST_V1 0x1
> > > > > >
> > > > > > #define PCI_ENDPOINT_TEST_COMMAND 0x4
> > > > > > #define COMMAND_RAISE_LEGACY_IRQ BIT(0)
> > > > > > @@ -52,6 +54,7 @@
> > > > > > #define STATUS_IRQ_RAISED BIT(6)
> > > > > > #define STATUS_SRC_ADDR_INVALID BIT(7)
> > > > > > #define STATUS_DST_ADDR_INVALID BIT(8)
> > > > > > +#define STATUS_DOORBELL_SUCCESS BIT(9)
> > > > > >
> > > > > > #define PCI_ENDPOINT_TEST_LOWER_SRC_ADDR 0x0c
> > > > > > #define PCI_ENDPOINT_TEST_UPPER_SRC_ADDR 0x10
> > > > > > @@ -66,7 +69,12 @@
> > > > > > #define PCI_ENDPOINT_TEST_IRQ_NUMBER 0x28
> > > > > >
> > > > > > #define PCI_ENDPOINT_TEST_FLAGS 0x2c
> > > > > > +#define PCI_ENDPOINT_TEST_DB_BAR 0x30
> > > > > > +#define PCI_ENDPOINT_TEST_DB_ADDR 0x34
> > > > > > +#define PCI_ENDPOINT_TEST_DB_DATA 0x38
> > > > > > +
> > > > > > #define FLAG_USE_DMA BIT(0)
> > > > > > +#define FLAG_SUPPORT_DOORBELL BIT(1)
> > > > > >
> > > > > > #define PCI_DEVICE_ID_TI_AM654 0xb00c
> > > > > > #define PCI_DEVICE_ID_TI_J7200 0xb00f
> > > > > > @@ -102,6 +110,7 @@ enum pci_barno {
> > > > > > BAR_3,
> > > > > > BAR_4,
> > > > > > BAR_5,
> > > > > > + NO_BAR = -1,
> > > > > > };
> > > > > >
> > > > > > struct pci_endpoint_test {
> > > > > > @@ -118,6 +127,7 @@ struct pci_endpoint_test {
> > > > > > enum pci_barno test_reg_bar;
> > > > > > size_t alignment;
> > > > > > const char *name;
> > > > > > + u8 version;
> > > > > > };
> > > > > >
> > > > > > struct pci_endpoint_test_data {
> > > > > > @@ -713,6 +723,38 @@ static bool pci_endpoint_test_set_irq(struct pci_endpoint_test *test,
> > > > > > return false;
> > > > > > }
> > > > > >
> > > > > > +static bool pci_endpoint_test_doorbell(struct pci_endpoint_test *test)
> > > > > > +{
> > > > > > + enum pci_barno bar;
> > > > > > + u32 data, status;
> > > > > > + u32 addr;
> > > > > > +
> > > > > > + if (test->version < PCI_ENDPOINT_TEST_V1)
> > > > > > + return false;
> > > > > > +
> > > > > > + bar = pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_DB_BAR);
> > > > > > + if (bar == NO_BAR)
> > > > > > + return false;
> > > > > > +
> > > > > > + data = pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_DB_DATA);
> > > > > > + addr = pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_DB_ADDR);
> > > > > > + bar = pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_DB_BAR);
> > > > > > +
> > > > > > + pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE, irq_type);
> > > > > > + pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_NUMBER, 1);
> > > > > > +
> > > > > > + pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_STATUS, 0);
> > > > > > + pci_endpoint_test_bar_writel(test, bar, addr, data);
> > > > > > +
> > > > > > + wait_for_completion_timeout(&test->irq_raised, msecs_to_jiffies(1000));
> > > > > > +
> > > > > > + status = pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_STATUS);
> > > > > > + if (status & STATUS_DOORBELL_SUCCESS)
> > > > > > + return true;
> > > > > > +
> > > > > > + return false;
> > > > > > +}
> > > > > > +
> > > > > > static long pci_endpoint_test_ioctl(struct file *file, unsigned int cmd,
> > > > > > unsigned long arg)
> > > > > > {
> > > > > > @@ -760,6 +802,9 @@ static long pci_endpoint_test_ioctl(struct file *file, unsigned int cmd,
> > > > > > case PCITEST_CLEAR_IRQ:
> > > > > > ret = pci_endpoint_test_clear_irq(test);
> > > > > > break;
> > > > > > + case PCITEST_DOORBELL:
> > > > > > + ret = pci_endpoint_test_doorbell(test);
> > > > > > + break;
> > > > > > }
> > > > > >
> > > > > > ret:
> > > > > > @@ -887,6 +932,9 @@ static int pci_endpoint_test_probe(struct pci_dev *pdev,
> > > > > > misc_device->parent = &pdev->dev;
> > > > > > misc_device->fops = &pci_endpoint_test_fops;
> > > > > >
> > > > > > + test->version = FIELD_GET(PCI_MAGIC_VERSION_MASK,
> > > > > > + pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_MAGIC));
> > > > > > +
> > > > > > err = misc_register(misc_device);
> > > > > > if (err) {
> > > > > > dev_err(dev, "Failed to register device\n");
> > > > > > diff --git a/include/uapi/linux/pcitest.h b/include/uapi/linux/pcitest.h
> > > > > > index f9c1af8d141b4..479ca1aa3ae0b 100644
> > > > > > --- a/include/uapi/linux/pcitest.h
> > > > > > +++ b/include/uapi/linux/pcitest.h
> > > > > > @@ -20,6 +20,7 @@
> > > > > > #define PCITEST_SET_IRQTYPE _IOW('P', 0x8, int)
> > > > > > #define PCITEST_GET_IRQTYPE _IO('P', 0x9)
> > > > > > #define PCITEST_CLEAR_IRQ _IO('P', 0x10)
> > > > > > +#define PCITEST_DOORBELL _IO('P', 0x11)
> > > > > >
> > > > > > #define PCITEST_FLAGS_USE_DMA 0x00000001
> > > > > >
> > > > > > --
> > > > > > 2.34.1
> > > > > >
> > > > >
> > > > > --
> > > > > மணிவண்ணன் சதாசிவம்
> > > >
> > > > --
> > > > மணிவண்ணன் சதாசிவம்
> >
> > --
> > மணிவண்ணன் சதாசிவம்
--
மணிவண்ணன் சதாசிவம்
