Hi Alain, On Wed, Oct 11, 2023 at 07:57:29PM +0200, Alain Volmat wrote: > Introduction of the Galaxy Core GC2145 XVGA CMOS camera sensor. > > Signed-off-by: Alain Volmat <alain.volmat@xxxxxxxxxxx> > --- > .../bindings/media/i2c/galaxycore,gc2145.yaml | 104 ++++++++++++++++++ > 1 file changed, 104 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/i2c/galaxycore,gc2145.yaml > > diff --git a/Documentation/devicetree/bindings/media/i2c/galaxycore,gc2145.yaml b/Documentation/devicetree/bindings/media/i2c/galaxycore,gc2145.yaml > new file mode 100644 > index 000000000000..94d194cf5452 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/i2c/galaxycore,gc2145.yaml > @@ -0,0 +1,104 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/media/i2c/galaxycore,gc2145.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Galaxy Core 1/5'' UXGA CMOS Image Sensor > + > +maintainers: > + - Alain Volmat <alain.volmat@xxxxxxxxxxx> > + > +description: > + The Galaxy Core GC2145 is a high quality 2 Mega CMOS image sensor, for mobile > + phone camera applications and digital camera products. GC2145 incorporates a > + 1616V x 1232H active pixel array, on-chip 10-bit ADC, and image signal > + processor. It is programmable through an I2C interface. Image data is sent > + either through a parallel interface or through MIPI CSI-2. > + > +allOf: > + - $ref: ../video-interface-devices.yaml# > + > +properties: > + compatible: > + const: galaxycore,gc2145 > + > + reg: > + const: 0x3c > + > + clocks: > + maxItems: 1 > + > + powerdown-gpios: > + maxItems: 1 > + > + reset-gpios: > + maxItems: 1 > + > + iovdd-supply: > + description: Power Supply for I/O circuits (1.7 - 3V). > + > + avdd-supply: > + description: Power for analog circuit/sensor array (2.7 - 3V). > + > + dvdd-supply: > + description: Power for digital core (1.7 - 1.9V). > + > + orientation: true > + > + rotation: true > + > + port: > + $ref: /schemas/graph.yaml#/$defs/port-base > + > + properties: > + endpoint: > + $ref: /schemas/media/video-interfaces.yaml# > + unevaluatedProperties: false > + > + required: > + - endpoint Could you add link-frequencies here, too? > + > + additionalProperties: false > + > +required: > + - compatible > + - reg > + - clocks > + - powerdown-gpios > + - reset-gpios > + - iovdd-supply > + - avdd-supply > + - dvdd-supply > + - port > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + camera@3c { > + compatible = "galaxycore,gc2145"; > + reg = <0x3c>; > + clocks = <&clk_ext_camera>; > + iovdd-supply = <&scmi_v3v3_sw>; > + avdd-supply = <&scmi_v3v3_sw>; > + dvdd-supply = <&scmi_v3v3_sw>; > + powerdown-gpios = <&mcp23017 3 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>; > + reset-gpios = <&mcp23017 4 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>; > + > + port { > + endpoint { > + remote-endpoint = <&mipid02_0>; > + data-lanes = <1 2>; > + }; > + }; > + }; > + }; > + > +... -- Kind regards, Sakari Ailus