Changelog: - Add gpio and eeprom behind i2c-mux - Remove redundant idle-state setting for i2c-mux - Enable adc 15, wdt2,spi gpio for yosemite4 use - Revise quad mode to dual mode to avoid WP pin influnece the SPI - Revise power sensor adm1281 for yosemite4 schematic change - Add gpio pca9506 I/O expander for yosemite4 use - remove space for adm1272 compatible - enable interrupt setting for pca9555 - add eeprom for yosemite4 medusa board/BSM use - remove temperature sensor for yosemite4 schematic change - add power sensor for power module reading - Revise adc128d818 adc mode for yosemite4 schematic change - Revise ina233 for yosemite4 schematic change - Remove idle state setting for yosemite4 NIC connection - Initialize bmc gpio state Delphine CC Chiu (10): ARM: dts: aspeed: yosemite4: Revise i2c-mux devices ARM: dts: aspeed: yosemite4: Enable adc15 ARM: dts: aspeed: yosemite4: Enable spi-gpio setting ARM: dts: aspeed: yosemite4: Enable watchdog2 ARM: dts: aspeed: yosemite4: Revise quad mode to dual mode ARM: dts: aspeed: yosemite4: Revise power sensor adm1281 for schematic change ARM: dts: aspeed: yosemite4: Add gpio pca9506 ARM: dts: aspeed: yosemite4: Revise i2c11 and i2c12 schematic change ARM: dts: aspeed: yosemite4: Revise i2c14 and i2c15 schematic change ARM: dts: aspeed: yosemite4: Initialize bmc gpio state .../aspeed/aspeed-bmc-facebook-yosemite4.dts | 1026 +++++++++++++++-- 1 file changed, 949 insertions(+), 77 deletions(-) -- 2.25.1