[PATCH v2 3/4] ata: libahci: Allow using multiple regulators

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




The current implementation of the libahci allows using multiple PHYs
but not multiple regulators. This patch adds the support of multiple
regulators. Due to some design choice of the regulator framework it is
not possible to declare the regulator under each port sub-node. They
need to be associated to each port as the host node level using the
property target-port<n>-supply, where <n> is the port number. But it
is however mandatory to have one port sub-node for each port associated
to a regulator.

There was only one driver which used directly the regulator field of
the ahci_host_priv structure. To preserve the bisectability the change
in the ahci_imx driver was done in the same patch.

Signed-off-by: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
---
 drivers/ata/ahci.h             |   2 +-
 drivers/ata/ahci_imx.c         |  14 +--
 drivers/ata/libahci_platform.c | 218 +++++++++++++++++++++++++++++------------
 include/linux/ahci_platform.h  |   2 +
 4 files changed, 162 insertions(+), 74 deletions(-)

diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 40f0e34f17af..275358ae0b3f 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -333,7 +333,7 @@ struct ahci_host_priv {
 	u32			em_msg_type;	/* EM message type */
 	bool			got_runtime_pm; /* Did we do pm_runtime_get? */
 	struct clk		*clks[AHCI_MAX_CLKS]; /* Optional */
-	struct regulator	*target_pwr;	/* Optional */
+	struct regulator	**target_pwrs;	/* Optional */
 	/*
 	 * If platform uses PHYs. There is a 1:1 relation between the port number and
 	 * the PHY position in this array.
diff --git a/drivers/ata/ahci_imx.c b/drivers/ata/ahci_imx.c
index 35d51c59a370..41632e57d46f 100644
--- a/drivers/ata/ahci_imx.c
+++ b/drivers/ata/ahci_imx.c
@@ -221,11 +221,9 @@ static int imx_sata_enable(struct ahci_host_priv *hpriv)
 	if (imxpriv->no_device)
 		return 0;
 
-	if (hpriv->target_pwr) {
-		ret = regulator_enable(hpriv->target_pwr);
-		if (ret)
-			return ret;
-	}
+	ret = ahci_platform_enable_regulators(hpriv);
+	if (ret)
+		return ret;
 
 	ret = clk_prepare_enable(imxpriv->sata_ref_clk);
 	if (ret < 0)
@@ -270,8 +268,7 @@ static int imx_sata_enable(struct ahci_host_priv *hpriv)
 disable_clk:
 	clk_disable_unprepare(imxpriv->sata_ref_clk);
 disable_regulator:
-	if (hpriv->target_pwr)
-		regulator_disable(hpriv->target_pwr);
+	ahci_platform_disable_regulators(hpriv);
 
 	return ret;
 }
@@ -291,8 +288,7 @@ static void imx_sata_disable(struct ahci_host_priv *hpriv)
 
 	clk_disable_unprepare(imxpriv->sata_ref_clk);
 
-	if (hpriv->target_pwr)
-		regulator_disable(hpriv->target_pwr);
+	ahci_platform_disable_regulators(hpriv);
 }
 
 static void ahci_imx_error_handler(struct ata_port *ap)
diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c
index a147aaadca85..a42fd62cbdfa 100644
--- a/drivers/ata/libahci_platform.c
+++ b/drivers/ata/libahci_platform.c
@@ -138,6 +138,59 @@ void ahci_platform_disable_clks(struct ahci_host_priv *hpriv)
 EXPORT_SYMBOL_GPL(ahci_platform_disable_clks);
 
 /**
+ * ahci_platform_enable_regulators - Enable regulators
+ * @hpriv: host private area to store config values
+ *
+ * This function enables all the regulators found in
+ * hpriv->target_pwrs, if any.  If a regulator fails to be enabled, it
+ * disables all the regulators already enabled in reverse order and
+ * returns an error.
+ *
+ * RETURNS:
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_enable_regulators(struct ahci_host_priv *hpriv)
+{
+	int rc, i;
+
+	for (i = 0; i < hpriv->nports; i++) {
+		if (!hpriv->target_pwrs[i])
+			continue;
+
+		rc = regulator_enable(hpriv->target_pwrs[i]);
+		if (rc)
+			goto disable_target_pwrs;
+	}
+
+	return 0;
+
+disable_target_pwrs:
+	while (--i >= 0)
+		if (hpriv->target_pwrs[i])
+			regulator_disable(hpriv->target_pwrs[i]);
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(ahci_platform_enable_regulators);
+
+/**
+ * ahci_platform_disable_regulators - Disable regulators
+ * @hpriv: host private area to store config values
+ *
+ * This function disables all regulators found in hpriv->target_pwrs.
+ */
+void ahci_platform_disable_regulators(struct ahci_host_priv *hpriv)
+{
+	int i;
+
+	for (i = 0; i < hpriv->nports; i++) {
+		if (!hpriv->target_pwrs[i])
+			continue;
+		regulator_disable(hpriv->target_pwrs[i]);
+	}
+}
+EXPORT_SYMBOL_GPL(ahci_platform_disable_regulators);
+/**
  * ahci_platform_enable_resources - Enable platform resources
  * @hpriv: host private area to store config values
  *
@@ -157,11 +210,9 @@ int ahci_platform_enable_resources(struct ahci_host_priv *hpriv)
 {
 	int rc;
 
-	if (hpriv->target_pwr) {
-		rc = regulator_enable(hpriv->target_pwr);
-		if (rc)
-			return rc;
-	}
+	rc = ahci_platform_enable_regulators(hpriv);
+	if (rc)
+		return rc;
 
 	rc = ahci_platform_enable_clks(hpriv);
 	if (rc)
@@ -177,8 +228,8 @@ disable_clks:
 	ahci_platform_disable_clks(hpriv);
 
 disable_regulator:
-	if (hpriv->target_pwr)
-		regulator_disable(hpriv->target_pwr);
+	ahci_platform_disable_regulators(hpriv);
+
 	return rc;
 }
 EXPORT_SYMBOL_GPL(ahci_platform_enable_resources);
@@ -199,8 +250,7 @@ void ahci_platform_disable_resources(struct ahci_host_priv *hpriv)
 
 	ahci_platform_disable_clks(hpriv);
 
-	if (hpriv->target_pwr)
-		regulator_disable(hpriv->target_pwr);
+	ahci_platform_disable_regulators(hpriv);
 }
 EXPORT_SYMBOL_GPL(ahci_platform_disable_resources);
 
@@ -218,6 +268,65 @@ static void ahci_platform_put_resources(struct device *dev, void *res)
 		clk_put(hpriv->clks[c]);
 }
 
+static int ahci_platform_get_phy(struct ahci_host_priv *hpriv, u32 port,
+				struct device *dev, struct device_node *node)
+{
+	int rc;
+
+	hpriv->phys[port] = devm_of_phy_get(dev, node, NULL);
+
+	if (!IS_ERR(hpriv->phys[port]))
+		return 0;
+
+	rc = PTR_ERR(hpriv->phys[port]);
+	switch (rc) {
+	case -ENOSYS:
+		/* No PHY support. Check if PHY is required. */
+		if (of_find_property(node, "phys", NULL)) {
+			dev_err(dev,
+				"couldn't get PHY in node %s: ENOSYS\n",
+				node->name);
+			break;
+		}
+	case -ENODEV:
+		/* continue normally */
+		hpriv->phys[port] = NULL;
+		rc = 0;
+		break;
+
+	default:
+		dev_err(dev,
+			"couldn't get PHY in node %s: %d\n",
+			node->name, rc);
+
+		break;
+	}
+
+	return rc;
+}
+
+static int ahci_platform_get_regulator(struct ahci_host_priv *hpriv, u32 port,
+				struct device *dev, struct device_node *node)
+{
+	struct regulator *target_pwr;
+	int rc = 0;
+	/*
+	 * No more than 32 ports (AHCI_MAX_PORTS), so we need 13
+	 * characters for target-portXX plus the null terminated one
+	 */
+	char name[14];
+
+	sprintf(name, "target-port%d", port);
+	target_pwr = devm_regulator_get_optional(dev, name);
+
+	if (!IS_ERR(target_pwr))
+		hpriv->target_pwrs[port] = target_pwr;
+	else
+		rc = PTR_ERR(target_pwr);
+
+	return rc;
+}
+
 /**
  * ahci_platform_get_resources - Get platform resources
  * @pdev: platform device to get resources for
@@ -240,7 +349,7 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev)
 	struct ahci_host_priv *hpriv;
 	struct clk *clk;
 	struct device_node *child;
-	int i, enabled_ports = 0, rc = -ENOMEM;
+	int i, sz, enabled_ports = 0, rc = -ENOMEM, child_nodes;
 	u32 mask_port_map = 0;
 
 	if (!devres_open_group(dev, NULL, GFP_KERNEL))
@@ -261,14 +370,6 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev)
 		goto err_out;
 	}
 
-	hpriv->target_pwr = devm_regulator_get_optional(dev, "target");
-	if (IS_ERR(hpriv->target_pwr)) {
-		rc = PTR_ERR(hpriv->target_pwr);
-		if (rc == -EPROBE_DEFER)
-			goto err_out;
-		hpriv->target_pwr = NULL;
-	}
-
 	for (i = 0; i < AHCI_MAX_CLKS; i++) {
 		/*
 		 * For now we must use clk_get(dev, NULL) for the first clock,
@@ -290,17 +391,30 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev)
 		hpriv->clks[i] = clk;
 	}
 
-	hpriv->nports = of_get_child_count(dev->of_node);
+	hpriv->nports = child_nodes = of_get_child_count(dev->of_node);
 
-	if (hpriv->nports) {
-		hpriv->phys = devm_kzalloc(dev,
-					   hpriv->nports * sizeof(*hpriv->phys),
-					   GFP_KERNEL);
-		if (!hpriv->phys) {
-			rc = -ENOMEM;
-			goto err_out;
-		}
+	/*
+	 * If no sub-node was found, we still need to set nports to
+	 * one in order to be able to use the
+	 * ahci_platform_[en|dis]able_[phys|regulators] functions.
+	 */
+	if (!child_nodes)
+		hpriv->nports = 1;
 
+	sz = hpriv->nports * sizeof(*hpriv->phys);
+	hpriv->phys = devm_kzalloc(dev, sz, GFP_KERNEL);
+	if (!hpriv->phys) {
+		rc = -ENOMEM;
+		goto err_out;
+	}
+	sz = hpriv->nports * sizeof(*hpriv->target_pwrs);
+	hpriv->target_pwrs = devm_kzalloc(dev, sz, GFP_KERNEL);
+	if (!hpriv->target_pwrs) {
+		rc = -ENOMEM;
+		goto err_out;
+	}
+
+	if (child_nodes) {
 		for_each_child_of_node(dev->of_node, child) {
 			u32 port;
 
@@ -319,14 +433,14 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev)
 
 			mask_port_map |= BIT(port);
 
-			hpriv->phys[port] = devm_of_phy_get(dev, child, NULL);
-			if (IS_ERR(hpriv->phys[port])) {
-				rc = PTR_ERR(hpriv->phys[port]);
-				dev_err(dev,
-					"couldn't get PHY in node %s: %d\n",
-					child->name, rc);
+			rc = ahci_platform_get_regulator(hpriv, port,
+							 dev, child);
+			if (rc == -EPROBE_DEFER)
+				goto err_out;
+
+			rc = ahci_platform_get_phy(hpriv, port, dev, child);
+			if (rc)
 				goto err_out;
-			}
 
 			enabled_ports++;
 		}
@@ -343,38 +457,14 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev)
 		 * If no sub-node was found, keep this for device tree
 		 * compatibility
 		 */
-		struct phy *phy = devm_phy_get(dev, "sata-phy");
-		if (!IS_ERR(phy)) {
-			hpriv->phys = devm_kzalloc(dev, sizeof(*hpriv->phys),
-						   GFP_KERNEL);
-			if (!hpriv->phys) {
-				rc = -ENOMEM;
-				goto err_out;
-			}
-
-			hpriv->phys[0] = phy;
-			hpriv->nports = 1;
-		} else {
-			rc = PTR_ERR(phy);
-			switch (rc) {
-				case -ENOSYS:
-					/* No PHY support. Check if PHY is required. */
-					if (of_find_property(dev->of_node, "phys", NULL)) {
-						dev_err(dev, "couldn't get sata-phy: ENOSYS\n");
-						goto err_out;
-					}
-				case -ENODEV:
-					/* continue normally */
-					hpriv->phys = NULL;
-					break;
-
-				default:
-					goto err_out;
+		rc = ahci_platform_get_phy(hpriv, 0, dev, dev->of_node);
+		if (rc)
+			goto err_out;
 
-			}
-		}
+		rc = ahci_platform_get_regulator(hpriv, 0, dev, dev->of_node);
+		if (rc == -EPROBE_DEFER)
+			goto err_out;
 	}
-
 	pm_runtime_enable(dev);
 	pm_runtime_get_sync(dev);
 	hpriv->got_runtime_pm = true;
diff --git a/include/linux/ahci_platform.h b/include/linux/ahci_platform.h
index 642d6ae4030c..f65b33809170 100644
--- a/include/linux/ahci_platform.h
+++ b/include/linux/ahci_platform.h
@@ -24,6 +24,8 @@ struct platform_device;
 
 int ahci_platform_enable_clks(struct ahci_host_priv *hpriv);
 void ahci_platform_disable_clks(struct ahci_host_priv *hpriv);
+int ahci_platform_enable_regulators(struct ahci_host_priv *hpriv);
+void ahci_platform_disable_regulators(struct ahci_host_priv *hpriv);
 int ahci_platform_enable_resources(struct ahci_host_priv *hpriv);
 void ahci_platform_disable_resources(struct ahci_host_priv *hpriv);
 struct ahci_host_priv *ahci_platform_get_resources(
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux