Re: [PATCH v1 2/2] iio: light: Add support for APDS9306 Light Sensor

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Subhajit,

It's nice to see the GTS helpers are used (and hopefully helpful). I didn't have the time to go through everything with full focus - so please just tell me if some of my questions are silly :) The comments I marked as 'nit' aren't really important - feel free to use your judgement on them :)

On 10/26/23 17:35, Subhajit Ghosh wrote:
Driver support for Avago (Broadcom) APDS9306 Ambient Light Sensor with als
and clear channels with i2c interface. Hardware interrupt configuration is
optional. It is a low power device with 20 bit resolution and has
configurable adaptive interrupt mode and interrupt persistence mode.
The device also features inbuilt hardware gain, multiple integration time
selection options and sampling frequency selection options.

v0 -> v1
- Fixed errors as per previous review
- Longer commit messages and descriptions
- Updated scale calculations as per iio gts scheme to export proper scale
   values and tables to userspace
- Removed processed attribute for the same channel for which raw is
   provided, instead, exporting proper scale and scale table to userspace so
   that userspace can do "(raw + offset) * scale" and derive Lux values
- Fixed IIO attribute range syntax
- Keeping the regmap lock enabled as the driver uses unlocked regfield
   accesses from interrupt handler
- Several levels of cleanups by placing guard mutexes in proper places and
   returning immediately in case of an error
- Using iio_device_claim_direct_mode() during raw reads so that
   configurations could not be changed during an adc conversion period
- In case of a powerdown error, returning immediately
- Removing the definition of direction of the hardware interrupt and
   leaving it on to device tree
- Adding the powerdown callback after doing device initialization
- Removed the regcache_cache_only() implementation

Signed-off-by: Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
---
  drivers/iio/light/Kconfig    |   12 +
  drivers/iio/light/Makefile   |    1 +
  drivers/iio/light/apds9306.c | 1334 ++++++++++++++++++++++++++++++++++
  3 files changed, 1347 insertions(+)
  create mode 100644 drivers/iio/light/apds9306.c

diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index 45edba797e4c..04e7d10f1470 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -73,6 +73,18 @@ config APDS9300
  	  To compile this driver as a module, choose M here: the
  	  module will be called apds9300.
+config APDS9306
+	tristate "Avago APDS9306 Ambient Light Sensor"
+	depends on I2C
+	select REGMAP_I2C
+	select IIO_GTS_HELPER
+	help
+	  If you say Y or M here, you get support for Avago APDS9306
+	  Ambient Light Sensor.
+
+	  If built as a dynamically linked module, it will be called
+	  apds9306.
+
  config APDS9960
  	tristate "Avago APDS9960 gesture/RGB/ALS/proximity sensor"
  	select REGMAP_I2C
diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
index c0db4c4c36ec..ab94eac04db0 100644
--- a/drivers/iio/light/Makefile
+++ b/drivers/iio/light/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_ADUX1020)		+= adux1020.o
  obj-$(CONFIG_AL3010)		+= al3010.o
  obj-$(CONFIG_AL3320A)		+= al3320a.o
  obj-$(CONFIG_APDS9300)		+= apds9300.o
+obj-$(CONFIG_APDS9306)		+= apds9306.o
  obj-$(CONFIG_APDS9960)		+= apds9960.o
  obj-$(CONFIG_AS73211)		+= as73211.o
  obj-$(CONFIG_BH1750)		+= bh1750.o
diff --git a/drivers/iio/light/apds9306.c b/drivers/iio/light/apds9306.c
new file mode 100644
index 000000000000..352893913a29
--- /dev/null
+++ b/drivers/iio/light/apds9306.c
@@ -0,0 +1,1334 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * APDS-9306/APDS-9306-065 Ambient Light Sensor
+ * I2C Address: 0x52
+ * Datasheet: https://docs.broadcom.com/doc/AV02-4755EN
+ *
+ * Copyright (C) 2023 Subhajit Ghosh <subhajit.ghosh@xxxxxxxxxxxxxx>
+ */
+

...

+
+/**
+ * struct part_id_gts_multiplier - Part no. & corresponding gts multiplier
+ * @part_id: Part ID of the device
+ * @max_scale_int: Multiplier for iio_init_iio_gts()
+ * @max_scale_nano: Multiplier for iio_init_iio_gts()
+ */
+struct part_id_gts_multiplier {
+	int part_id;
+	int max_scale_int;
+	int max_scale_nano;
+};
+
+/*
+ * As per the datasheet, at HW Gain = 3x, Integration time 100mS (32x),
+ * typical 2000 ADC counts are observed for 49.8 uW per sq cm (340.134 lux)
+ * for apds9306 and 43 uW per sq cm (293.69 lux) for apds9306-065.
+ * Assuming lux per count is linear across all integration time ranges.

I love this comment. Still, even with this I managed to get confused :) It might be beneficial to mention that the minimum gain is 1x from both the integration time and gain. (Not mandatory, I was just trying to figure out why this was so difficult for me to follow).

+ * Lux = (raw + offset) * scale; offset can be any value by userspace.
+ * HG = Hardware Gain; ITG = Gain by changing integration time.
+ * Scale table by IIO GTS Helpers = (1 / HG) * (1 / ITG) * Multiplier.
+ *
+ * The Lux values provided in the datasheet are at ITG=32x and HG=3x,
+ * at typical 2000 count.
+ *
+ * Lux per ADC count at 3x and 32x for apds9306 = 340.134 / 2000
+ * Lux per ADC count at 3x and 32x for apds9306-065 = 293.69 / 2000
+ *
+ * The Multiplier for the scale table provided to userspace:
+ * IIO GTS scale Multiplier for apds9306 = (340.134 / 2000) * 32 * 3

'nit'
Could you please show also the result of the computation (16.326432)...

+ * IIO GTS scale Multiplier for apds9306-065 = (293.69 / 2000) * 32 * 3
+ */
+static struct part_id_gts_multiplier apds9306_gts_mul[] = {
+	{
+		.part_id = 0xB1,
+		.max_scale_int = 16,
+		.max_scale_nano = 3264320,

'nit'
... to make it easier to see what we have here corresponds to the values in comment above.

+	}, {
+		.part_id = 0xB3,
+		.max_scale_int = 14,
+		.max_scale_nano = 9712000,
+	},
+};
+
+/**
+ * apds9306_repeat_rate_freq - Sampling Frequency in uHz
+ */
+static const int apds9306_repeat_rate_freq[][2] = {
+	{40, 0},
+	{20, 0},
+	{10, 0},
+	{5,  0},
+	{2,  0},
+	{1,  0},
+	{0, 500000},
+};
+
+/**
+ * apds9306_repeat_rate_period - Sampling period in uSec
+ */
+static const int apds9306_repeat_rate_period[] = {
+	25000, 50000, 100000, 200000, 500000, 1000000, 2000000
+};
+static_assert(ARRAY_SIZE(apds9306_repeat_rate_freq) ==
+	      ARRAY_SIZE(apds9306_repeat_rate_period));
+
+/**
+ * struct apds9306_data - apds9306 private data and registers definitions
+ *
+ * All regfield definitions are named exactly according to datasheet for easy
+ * search
+ *
+ * @dev:	Pointer to the device structure
+ * @gts:	IIO Gain Time Scale structure
+ * @mutex:	Lock for protecting register access, adc reads and power
+ * @regmap:	Regmap structure pointer
+ * @regfield_sw_reset:	Reg: MAIN_CTRL, Field: SW_Reset
+ * @regfield_en:	Reg: MAIN_CTRL, Field: ALS_EN
+ * @regfield_intg_time:	Reg: ALS_MEAS_RATE, Field: ALS Resolution/Bit Width
+ * @regfield_repeat_rate:	Reg: ALS_MEAS_RATE, Field: ALS Measurement Rate
+ * @regfield_scale:	Reg: ALS_GAIN, Field: ALS Gain Range
+ * @regfield_int_src:	Reg: INT_CFG, Field: ALS Interrupt Source
+ * @regfield_int_thresh_var_en:	Reg: INT_CFG, Field: ALS Var Interrupt Mode
+ * @regfield_int_en:	Reg: INT_CFG, Field: ALS Interrupt Enable
+ * @regfield_int_persist_val:	Reg: INT_PERSISTENCE, Field: ALS_PERSIST
+ * @regfield_int_thresh_var_val:	Reg: ALS_THRSH_VAR, Field: ALS_THRES_VAR
+ * @nlux_per_count:	nano lux per ADC count for a particular model
+ * @read_data_available:	Flag set by IRQ handler for ADC data available
+ * @intg_time_idx:	Array index for integration times
+ * @repeat_rate_idx:	Array index for sampling frequency
+ * @gain_idx:	Array index for gain
+ * @int_ch:	Currently selected Interrupt channel
+ */
+struct apds9306_data {
+	struct device *dev;
+	struct iio_gts gts;
+	/*
+	 * Protects device settings changes where some calculations are required
+	 * before or after setting or getting the raw settings values from regmap
+	 * writes or reads respectively.
+	 */
+	struct mutex mutex;
+
+	struct regmap *regmap;
+	struct regmap_field *regfield_sw_reset;
+	struct regmap_field *regfield_en;
+	struct regmap_field *regfield_intg_time;
+	struct regmap_field *regfield_repeat_rate;
+	struct regmap_field *regfield_scale;
+	struct regmap_field *regfield_int_src;
+	struct regmap_field *regfield_int_thresh_var_en;
+	struct regmap_field *regfield_int_en;
+	struct regmap_field *regfield_int_persist_val;
+	struct regmap_field *regfield_int_thresh_var_val;
+
+	int nlux_per_count;
+	int read_data_available;
+	u8 intg_time_idx;
+	u8 repeat_rate_idx;
+	u8 gain_idx;

'nit'
I'm not sure caching the time and gain idx in the driver data is that beneficial? I assume you use regmap cache amyways. For me caching these add a bit of complexity when trying to ensure they are not used 'uninitialized' for not that obvious benefit.

+	u8 int_ch;
+};
+
+/*
+ * Available scales with gain 1x - 18x, timings 3.125, 25, 50, 100, 200,
+ * 400 mS
+ * Time impacts to gain: 1x, 8x, 16x, 32x, 64x, 128x > + */
+
+#define APDS9306_GSEL_1X	0x00
+#define APDS9306_GSEL_3X	0x01
+#define APDS9306_GSEL_6X	0x02
+#define APDS9306_GSEL_9X	0x03
+#define APDS9306_GSEL_18X	0x04
+
+static const struct iio_gain_sel_pair apds9306_gains[] = {
+	GAIN_SCALE_GAIN(1, APDS9306_GSEL_1X),
+	GAIN_SCALE_GAIN(3, APDS9306_GSEL_3X),
+	GAIN_SCALE_GAIN(6, APDS9306_GSEL_6X),
+	GAIN_SCALE_GAIN(9, APDS9306_GSEL_9X),
+	GAIN_SCALE_GAIN(18, APDS9306_GSEL_18X),
+};
+
+#define APDS9306_MEAS_MODE_400MS	0x00
+#define APDS9306_MEAS_MODE_200MS	0x01
+#define APDS9306_MEAS_MODE_100MS	0x02
+#define APDS9306_MEAS_MODE_50MS		0x03
+#define APDS9306_MEAS_MODE_25MS		0x04
+#define APDS9306_MEAS_MODE_3125US	0x05
+
+static const struct iio_itime_sel_mul apds9306_itimes[] = {
+	GAIN_SCALE_ITIME_US(400000, APDS9306_MEAS_MODE_400MS, 128),
+	GAIN_SCALE_ITIME_US(200000, APDS9306_MEAS_MODE_200MS, 64),
+	GAIN_SCALE_ITIME_US(100000, APDS9306_MEAS_MODE_100MS, 32),
+	GAIN_SCALE_ITIME_US(50000, APDS9306_MEAS_MODE_50MS, 16),
+	GAIN_SCALE_ITIME_US(25000, APDS9306_MEAS_MODE_25MS, 8),
+	GAIN_SCALE_ITIME_US(3125, APDS9306_MEAS_MODE_3125US, 1),
+};
+

...

+
+static const struct regmap_config apds9306_regmap = {
+	.name = "apds9306_regmap",
+	.reg_bits = 8,
+	.val_bits = 8,
+	.rd_table = &apds9306_readable_table,
+	.wr_table = &apds9306_writable_table,
+	.volatile_table = &apds9306_volatile_table,
+	.precious_table = &apds9306_precious_table,
+	.max_register = APDS9306_ALS_THRES_VAR,
+	.cache_type = REGCACHE_RBTREE,
+	/*
+	 * Leaving the regmap lock enabled as regfield accesses are everywhere
+	 * which are read modify writes and data mutex is not used in the
+	 * interrupt handler.
+	 */

To my eye this comment looks a bit misplaced without the
	.disable_locking = false,
- which is a no-op here. I think what you wrote in the comment is true (default assumption) for many drivers - maybe the comment is not needed?

+};

...

+static int apds9306_read_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan, int *val,
+			     int *val2, long mask)
+{
+	struct apds9306_data *data = iio_priv(indio_dev);
+	int ret, reg;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		if (chan->channel2 == IIO_MOD_LIGHT_CLEAR)
+			reg = APDS9306_CLEAR_DATA_0;
+		else
+			reg = APDS9306_ALS_DATA_0;
+		/*
+		 * Changing device parameters during adc operation, resets
+		 * the ADC which has to avoided.
+		 */

Would you need to grab the mutex here? I think you want also prevent changing gain/time during the computations.

+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+		ret = apds9306_read_data(data, val, reg);
+		iio_device_release_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_INT_TIME:
+		ret = apds9306_intg_time_get(data, val2);
+		if (ret)
+			return ret;
+		*val = 0;
+		return IIO_VAL_INT_PLUS_MICRO;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		ret = apds9306_sampling_freq_get(data, val, val2);
+		if (ret)
+			return ret;
+		return IIO_VAL_INT_PLUS_MICRO;
+	case IIO_CHAN_INFO_SCALE:
+		ret = apds9306_scale_get(data, val, val2);
+		if (ret)
+			return ret;
+		return IIO_VAL_INT_PLUS_NANO;
+	default:
+		return -EINVAL;
+	}
+};
+

Thanks for the nice driver!

Yours,
	-- Matti


--
Matti Vaittinen
Linux kernel developer at ROHM Semiconductors
Oulu Finland

~~ When things go utterly wrong vim users can always type :help! ~~






[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux