On Thu, Jan 8, 2015 at 4:26 PM, Andrew Lunn <andrew@xxxxxxx> wrote:
> Document the binding for the TLC59116 LED driver.
>
> Signed-off-by: Andrew Lunn <andrew@xxxxxxx>
> Cc: Matthew.Fatheree@xxxxxxxxxx
> ---
> .../devicetree/bindings/leds/leds-tlc59116.txt | 41 ++++++++++++++++++++++
> 1 file changed, 41 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/leds/leds-tlc59116.txt
>
> diff --git a/Documentation/devicetree/bindings/leds/leds-tlc59116.txt b/Documentation/devicetree/bindings/leds/leds-tlc59116.txt
> new file mode 100644
> index 000000000000..9526731eda95
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/leds-tlc59116.txt
> @@ -0,0 +1,41 @@
> +LEDs connected to tcl59116
> +
> +Required properties
> +- compatible: should be "ti,tlc59116"
> +- #address-cells: must be 1
> +- #size-cells: must be 0
> +- reg: typically 0x68
> +
> +Each led is represented as a sub-node of the ti,,tlc59116.
> +See Documentation/devicetree/bindings/leds/common.txt
> +
> +LED sub-node properties:
> +- reg: number of LED line, 0 to 15
> +- label: (optional) name of LED
> +- linux,default-trigger : (optional)
> +
> +Examples:
> +
> +tlc59116@68 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #gpio-cells = <2>;
What's gpio-cells for? Or missing document?
> + compatible = "ti,tlc59116";
> + reg = <0x68>;
> +
> + wan@0 {
> + label = "wrt1900ac:amber:wan";
> + reg = <0x0>;
> + };
> +
> + 2g@2 {
> + label = "wrt1900ac:white:2g";
> + reg = <0x2>;
> + };
> +
> + alive@9 {
> + label = "wrt1900ac:green:alive";
> + reg = <0x9>;
> + linux,default_trigger = "heartbeat";
> + };
> +};
> --
> 2.1.3
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
