From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx> Some mvebu boards have the UART1 more easily accessible than the other UARTs found on the system. Add a debug_ll option for this case. Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx> Acked-by: Jason Cooper <jason@xxxxxxxxxxxxxx> Acked-by: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx> Signed-off-by: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx> --- arch/arm/Kconfig.debug | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index eb3991cf63ab..7bd1bbccc43c 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -489,6 +489,21 @@ choice when u-boot hands over to the kernel, the system silently crashes, with no serial output at all. + config DEBUG_MVEBU_UART1_ALTERNATE + bool "Kernel low-level debugging messages via MVEBU UART1 (new bootloaders)" + depends on ARCH_MVEBU + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on MVEBU based platforms on UART1. + + This option should be used with the new bootloaders + that remap the internal registers at 0xf1000000. + + If the wrong DEBUG_MVEBU_UART* option is selected, + when u-boot hands over to the kernel, the system + silently crashes, with no serial output at all. + config DEBUG_VF_UART bool "Vybrid UART" depends on SOC_VF610 @@ -1297,6 +1312,7 @@ config DEBUG_UART_PHYS default 0xf0000be0 if ARCH_EBSA110 default 0xf040ab00 if DEBUG_BRCMSTB_UART default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE + default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE default 0xf1012000 if ARCH_DOVE || ARCH_MV78XX0 || \ ARCH_ORION5X default 0xf7fc9000 if DEBUG_BERLIN_UART @@ -1378,6 +1394,7 @@ config DEBUG_UART_VIRT default 0xfeb31000 if DEBUG_KEYSTONE_UART1 default 0xfec02000 if DEBUG_SOCFPGA_UART default 0xfec12000 if DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE + default 0xfec12100 if DEBUG_MVEBU_UART1_ALTERNATE default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0 default 0xfec90000 if DEBUG_RK32_UART2 default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1 -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
