Hi Chris, On Wed, Oct 25, 2023 at 11:30:31AM +1300, Chris Packham wrote: > Add reset-gpios and reset-duration-us properties to the > marvell,mv64xxx-i2c binding. These can be used to describe hardware > where a common reset GPIO is connected to all downstream devices on and > I2C bus. This reset will be asserted then released before the downstream > devices on the bus are probed. > > Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> Acked-by: Andi Shyti <andi.shyti@xxxxxxxxxx> Thanks, Andi