Realtek switches can now be reset using a reset controller.
The 'reset-gpios' were never mandatory for the driver, although they
are required for some devices if the switch reset was left asserted by
a previous driver, such as the bootloader.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@xxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
---
Documentation/devicetree/bindings/net/dsa/realtek.yaml | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/net/dsa/realtek.yaml b/Documentation/devicetree/bindings/net/dsa/realtek.yaml
index cce692f57b08..070821eae2a7 100644
--- a/Documentation/devicetree/bindings/net/dsa/realtek.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/realtek.yaml
@@ -59,6 +59,12 @@ properties:
description: GPIO to be used to reset the whole device
maxItems: 1
+ resets:
+ maxItems: 1
+
+ reset-names:
+ const: switch
+
realtek,disable-leds:
type: boolean
description: |
@@ -127,7 +133,6 @@ else:
- mdc-gpios
- mdio-gpios
- mdio
- - reset-gpios
required:
- compatible
--
2.42.0
