- enable usb 2.0
- enable debug uart (uart9)
- enable touchscreen
- enable ipa so that we can bring up mobile data
Signed-off-by: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
Cc: Andy Gross <agross@xxxxxxxxxx>
Cc: Bjorn Andersson <andersson@xxxxxxxxxx>
Cc: Conor Dooley <conor+dt@xxxxxxxxxx>
Cc: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@xxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: linux-arm-msm@xxxxxxxxxxxxxxx
---
Changes in v2:
- hex to decimal in regulator values
- fix dtb_check warnings
.../dts/qcom/sdm845-samsung-starqltechn.dts | 173 +++++++++++++++++-
1 file changed, 171 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
index 6fc30fd1262b..f2bc3c412a2f 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
@@ -11,11 +11,17 @@
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "sdm845.dtsi"
+/delete-node/ &rmtfs_mem;
+
/ {
chassis-type = "handset";
model = "Samsung Galaxy S9 SM-G9600";
compatible = "samsung,starqltechn", "qcom,sdm845";
+ aliases {
+ serial0 = &uart9;
+ };
+
chosen {
#address-cells = <2>;
#size-cells = <2>;
@@ -68,6 +74,93 @@ memory@a1300000 {
ftrace-size = <0x40000>;
pmsg-size = <0x40000>;
};
+
+ /* The rmtfs_mem needs to be guarded due to "XPU limitations"
+ * it is otherwise possible for an allocation adjacent to the
+ * rmtfs_mem region to trigger an XPU violation, causing a crash.
+ */
+ rmtfs_lower_guard: memory@fde00000 {
+ no-map;
+ reg = <0 0xfde00000 0 0x1000>;
+ };
+
+ rmtfs_mem: rmtfs-mem@fde01000 {
+ compatible = "qcom,rmtfs-mem";
+ reg = <0 0xfde01000 0 0x200000>;
+ no-map;
+
+ qcom,client-id = <1>;
+ qcom,vmid = <15>;
+ };
+
+ rmtfs_upper_guard: rmtfs-upper-guard@fe001000 {
+ no-map;
+ reg = <0 0xfe001000 0 0x1000>;
+ };
+
+ /*
+ * It seems like reserving the old rmtfs_mem region is also needed to prevent
+ * random crashes which are most likely modem related, more testing needed.
+ */
+ removed_region: removed-region@88f00000 {
+ no-map;
+ reg = <0 0x88f00000 0 0x1c00000>;
+ };
+ };
+
+ i2c@21 {
+ compatible = "i2c-gpio";
+ sda-gpios = <&tlmm 127 0x0>;
+ scl-gpios = <&tlmm 128 0x0>;
+ i2c-gpio,delay-us = <0x2>;
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c21_sda_state &i2c21_scl_state>;
+
+ regulator@60 {
+ compatible = "samsung,s2dos05";
+ reg = <0x60>;
+
+ regulators {
+ s2dos05_ldo1: s2dos05-ldo1 {
+ regulator-name = "s2dos05-ldo1";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-active-discharge = <0x1>;
+ };
+
+ s2dos05_ldo2: s2dos05-ldo2 {
+ regulator-name = "s2dos05-ldo2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-active-discharge = <0x1>;
+ regulator-boot-on;
+ };
+
+ s2dos05_ldo3: s2dos05-ldo3 {
+ regulator-name = "s2dos05-ldo3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-active-discharge = <0x1>;
+ regulator-boot-on;
+ };
+
+ s2dos05_ldo4: s2dos05-ldo4 {
+ regulator-name = "s2dos05-ldo4";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3775000>;
+ regulator-active-discharge = <0x1>;
+ };
+
+ s2dos05_buck1: s2dos05-buck1 {
+ regulator-name = "s2dos05-buck1";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <2100000>;
+ regulator-active-discharge = <0x1>;
+ };
+ };
+ };
};
};
@@ -135,8 +228,6 @@ vdda_pll_cc_ebi23:
vdda_sp_sensor:
vdda_ufs1_core:
vdda_ufs2_core:
- vdda_usb1_ss_core:
- vdda_usb2_ss_core:
vreg_l1a_0p875: ldo1 {
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <880000>;
@@ -157,6 +248,7 @@ vreg_l3a_1p0: ldo3 {
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
+ vdda_usb1_ss_core:
vdd_wcss_cx:
vdd_wcss_mx:
vdda_wcss_pll:
@@ -365,6 +457,10 @@ &qupv3_id_1 {
status = "okay";
};
+&gpi_dma1 {
+ status = "okay";
+};
+
&uart9 {
status = "okay";
};
@@ -391,13 +487,50 @@ &sdhc_2 {
status = "okay";
};
+&i2c11 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ touchscreen@48 {
+ compatible = "samsung,s6sy761";
+ reg = <0x48>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <120 0x0>;
+ vdd-supply = <&s2dos05_ldo2>;
+ avdd-supply = <&s2dos05_ldo3>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&touch_irq_state>;
+ };
+};
+
+/* Modem/wifi*/
+&mss_pil {
+ status = "okay";
+ firmware-name = "qcom/sdm845/starqltechn/mba.mbn", "qcom/sdm845/starqltechn/modem.mbn";
+};
+
+&ipa {
+ qcom,gsi-loader = "self";
+ memory-region = <&ipa_fw_mem>;
+ firmware-name = "qcom/sdm845/starqltechn/ipa_fws.mbn";
+ status = "okay";
+};
+
&usb_1 {
status = "okay";
+ /*
+ * disable USB3 clock requirement as the device only supports
+ * USB2.
+ */
+ qcom,select-utmi-as-pipe-clk;
};
&usb_1_dwc3 {
/* Until we have Type C hooked up we'll force this as peripheral. */
dr_mode = "peripheral";
+
+ maximum-speed = "high-speed";
};
&usb_1_hsphy {
@@ -449,4 +582,40 @@ sd_card_det_n_state: sd-card-det-n-state {
function = "gpio";
bias-pull-up;
};
+
+ i2c21_sda_state: i2c-sda-state {
+ pins = "gpio127";
+ function = "gpio";
+ drive-strength = <0x2>;
+ bias-disable;
+ };
+
+ i2c21_scl_state: i2c-scl-state {
+ pins = "gpio128";
+ function = "gpio";
+ drive-strength = <0x2>;
+ bias-disable;
+ };
+
+ touch_irq_state: touch-irq-state {
+ pins = "gpio120";
+ function = "gpio";
+ bias-disable;
+ output-disable;
+ };
+};
+
+&qup_uart9_tx {
+ drive-strength = <0x2>;
+ bias-pull-up;
+};
+
+&qup_uart9_rx {
+ drive-strength = <0x2>;
+ bias-pull-up;
+};
+
+&qup_i2c11_default {
+ drive-strength = <2>;
+ bias-disable;
};
--
2.30.2
