Re: [PATCH v2 2/3] arm64: dts: qcom: pm8916: Add BMS and charger

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Konrad Dybcio писал(а) 24.10.2023 13:34:
> On 10/23/23 08:20, Nikita Travkin wrote:
>> pm8916 contains some hardware blocks for battery powered devices:
>>
>> - VM-BMS: Battery voltage monitoring block.
>> - LBC: Linear battery charger.
>>
>> Add them to the pmic dtsi so the devices that make use of those blocks
>> can enable them.
>>
>> Signed-off-by: Nikita Travkin <nikita@xxxxxxx>
>> ---
>>   arch/arm64/boot/dts/qcom/pm8916.dtsi | 48 ++++++++++++++++++++++++++++++++++++
>>   1 file changed, 48 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi
>> index f4de86787743..4b2e8fb47d2d 100644
>> --- a/arch/arm64/boot/dts/qcom/pm8916.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi
>> @@ -41,6 +41,35 @@ watchdog {
>>   			};
>>   		};
>>   +		pm8916_charger: charger@1000 {
>> +			compatible = "qcom,pm8916-lbc";
>> +			reg = <0x1000>, <0x1200>, <0x1300>, <0x1600>;
>> +			reg-names = "chgr", "bat_if", "usb", "misc";
>> +
>> +			interrupts = <0x0 0x10 0 IRQ_TYPE_EDGE_BOTH>,
>> +				     <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
>> +				     <0x0 0x10 6 IRQ_TYPE_EDGE_BOTH>,
>> +				     <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
>> +				     <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
>> +				     <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
>> +				     <0x0 0x13 0 IRQ_TYPE_EDGE_BOTH>,
>> +				     <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
>> +				     <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
>> +				     <0x0 0x13 4 IRQ_TYPE_EDGE_BOTH>;
>> +			interrupt-names = "vbat_det",
>> +					  "fast_chg",
>> +					  "chg_fail",
>> +					  "chg_done",
>> +					  "bat_pres",
>> +					  "temp_ok",
>> +					  "coarse_det",
>> +					  "usb_vbus",
> So, both the charger and the USBIN driver use the same irq? :/
> 

AFAIU the usbin extcon driver pretty much just tracks the state
of the IRQ to report extcon. It happens to assume the same part
of the pmic though, yes, which also means there will be no user
that would enable both charger and vbus extcon, since charger
driver provides this functionality as well.

Nikita

> Konrad




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux