Re: [PATCH v1 4/4] leds: no longer use unnamed gpios

[Olliver Schinagl <oliver@xxxxxxxxxxx>]

Hey Dmitry,

On 08-01-15 00:55, Dmitry Torokhov wrote:
> On Wed, Jan 07, 2015 at 10:08:42AM +0100, Olliver Schinagl wrote:
> > From: Olliver Schinagl <oliver@xxxxxxxxxxx>
> >
> > The gpio document says we should not use unnamed bindings for gpios.
> > This patch uses the 'led-' prefix to the gpios and updates code and
> > documents. Because the devm_get_gpiod_from_child() falls back to using
> > old-style unnamed gpios, we can update the code first, and update
> > dts files as time allows.
> >
> > Signed-off-by: Olliver Schinagl <oliver@xxxxxxxxxxx>
> > ---
> >   Documentation/devicetree/bindings/leds/leds-gpio.txt | 12 ++++++------
> >   drivers/leds/leds-gpio.c                             |  2 +-
> >   2 files changed, 7 insertions(+), 7 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/leds/leds-gpio.txt b/Documentation/devicetree/bindings/leds/leds-gpio.txt
> > index d544cf1..2c138cc 100644
> > --- a/Documentation/devicetree/bindings/leds/leds-gpio.txt
> > +++ b/Documentation/devicetree/bindings/leds/leds-gpio.txt
> > @@ -7,7 +7,7 @@ Each LED is represented as a sub-node of the gpio-leds device.  Each
> >   node's name represents the name of the corresponding LED.
> >   
> >   LED sub-node properties:
> > -- gpios :  Should specify the LED's GPIO, see "gpios property" in
> > +- led-gpios :  Should specify the LED's GPIO, see "gpios property" in
> >     Documentation/devicetree/bindings/gpio/gpio.txt.  Active low LEDs should be
> >     indicated using flags in the GPIO specifier.
> >   - label :  (optional)
> > @@ -32,12 +32,12 @@ leds {
> >   	compatible = "gpio-leds";
> >   	hdd {
> >   		label = "IDE Activity";
> > -		gpios = <&mcu_pio 0 GPIO_ACTIVE_LOW>;
> > +		led-gpios = <&mcu_pio 0 GPIO_ACTIVE_LOW>;
> >   		linux,default-trigger = "ide-disk";
> >   	};
> >   
> >   	fault {
> > -		gpios = <&mcu_pio 1 GPIO_ACTIVE_HIGH>;
> > +		led-gpios = <&mcu_pio 1 GPIO_ACTIVE_HIGH>;
> >   		/* Keep LED on if BIOS detected hardware fault */
> >   		default-state = "keep";
> >   	};
> > @@ -46,11 +46,11 @@ leds {
> >   run-control {
> >   	compatible = "gpio-leds";
> >   	red {
> > -		gpios = <&mpc8572 6 GPIO_ACTIVE_HIHG>;
> > +		led-gpios = <&mpc8572 6 GPIO_ACTIVE_HIHG>;
> >   		default-state = "off";
> >   	};
> >   	green {
> > -		gpios = <&mpc8572 7 GPIO_ACTIVE_HIGH>;
> > +		led-gpios = <&mpc8572 7 GPIO_ACTIVE_HIGH>;
> >   		default-state = "on";
> >   	};
> >   };
> > @@ -59,7 +59,7 @@ leds {
> >   	compatible = "gpio-leds";
> >   
> >   	charger-led {
> > -		gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
> > +		led-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
> >   		linux,default-trigger = "max8903-charger-charging";
> >   		retain-state-suspended;
> >   	};
> > diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c
> > index 8e5af69..5b7bc84 100644
> > --- a/drivers/leds/leds-gpio.c
> > +++ b/drivers/leds/leds-gpio.c
> > @@ -184,7 +184,7 @@ static struct gpio_leds_priv *gpio_leds_create(struct platform_device *pdev)
> >   		struct gpio_led led = {};
> >   		const char *state = NULL;
> >   
> > -		led.gpiod = devm_get_gpiod_from_child(dev, NULL, child);
> > +		led.gpiod = devm_get_gpiod_from_child(dev, "led", child);
> Would not this break existing boards using old bindings? You need to
> handle both cases: if you can't located "led-gpios" then you will have to
> try just "gpios".
Very true. I was rather even hoping we could update all bindings, I 
don't mind going through the available dts files to fix them ... But 
need to know that that's the proper way to go before doing the work ;)

Olliver
> Thanks.

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html