On Mon, 23 Oct 2023 21:16:44 +0530, Parthiban Veerasooran wrote: > Add DT bindings OPEN Alliance 10BASE-T1x MACPHY Serial Interface > parameters. These are generic properties that can apply to any 10BASE-T1x > MAC-PHY which uses OPEN Alliance TC6 specification. > > Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@xxxxxxxxxxxxx> > --- > .../devicetree/bindings/net/oa-tc6.yaml | 72 +++++++++++++++++++ > MAINTAINERS | 1 + > 2 files changed, 73 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/oa-tc6.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: ./Documentation/devicetree/bindings/net/oa-tc6.yaml:16:68: [error] syntax error: mapping values are not allowed here (syntax) dtschema/dtc warnings/errors: make[2]: *** Deleting file 'Documentation/devicetree/bindings/net/oa-tc6.example.dts' Documentation/devicetree/bindings/net/oa-tc6.yaml:16:68: mapping values are not allowed in this context make[2]: *** [Documentation/devicetree/bindings/Makefile:26: Documentation/devicetree/bindings/net/oa-tc6.example.dts] Error 1 make[2]: *** Waiting for unfinished jobs.... ./Documentation/devicetree/bindings/net/oa-tc6.yaml:16:68: mapping values are not allowed in this context /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/oa-tc6.yaml: ignoring, error parsing file make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1427: dt_binding_check] Error 2 make: *** [Makefile:234: __sub-make] Error 2 doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20231023154649.45931-5-Parthiban.Veerasooran@xxxxxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
