On Wed, Jan 07, 2015 at 10:08:41AM +0100, Olliver Schinagl wrote:
> From: Olliver Schinagl <oliver@xxxxxxxxxxx>
>
> In the gpio bindings documents it is requested to use the marco's in
> include/dt-bindings/gpio/gpio.h whenever possible. The gpios in the led
> drivers don't seem to form an exception, so update the example in the
> document bindings.
>
> Signed-off-by: Olliver Schinagl <oliver@xxxxxxxxxxx>
> ---
> Documentation/devicetree/bindings/leds/leds-gpio.txt | 12 +++++++-----
> 1 file changed, 7 insertions(+), 5 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/leds/leds-gpio.txt b/Documentation/devicetree/bindings/leds/leds-gpio.txt
> index f77148f..d544cf1 100644
> --- a/Documentation/devicetree/bindings/leds/leds-gpio.txt
> +++ b/Documentation/devicetree/bindings/leds/leds-gpio.txt
> @@ -26,16 +26,18 @@ LED sub-node properties:
>
> Examples:
>
> +#include <dt-bindings/gpio/gpio.h>
> +
> leds {
> compatible = "gpio-leds";
> hdd {
> label = "IDE Activity";
> - gpios = <&mcu_pio 0 1>; /* Active low */
> + gpios = <&mcu_pio 0 GPIO_ACTIVE_LOW>;
> linux,default-trigger = "ide-disk";
> };
>
> fault {
> - gpios = <&mcu_pio 1 0>;
> + gpios = <&mcu_pio 1 GPIO_ACTIVE_HIGH>;
> /* Keep LED on if BIOS detected hardware fault */
> default-state = "keep";
> };
> @@ -44,11 +46,11 @@ leds {
> run-control {
> compatible = "gpio-leds";
> red {
> - gpios = <&mpc8572 6 0>;
> + gpios = <&mpc8572 6 GPIO_ACTIVE_HIHG>;
Typo, s/HIHG/HIGH/
> default-state = "off";
> };
> green {
> - gpios = <&mpc8572 7 0>;
> + gpios = <&mpc8572 7 GPIO_ACTIVE_HIGH>;
> default-state = "on";
> };
> };
> @@ -57,7 +59,7 @@ leds {
> compatible = "gpio-leds";
>
> charger-led {
> - gpios = <&gpio1 2 0>;
> + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
> linux,default-trigger = "max8903-charger-charging";
> retain-state-suspended;
> };
> --
> 2.1.4
>
--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
