[PATCH v3] ARM: dts: Add dts file for odroid XU3 board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Add DTS for the Hardkernel Odroid XU3. The name of the DTS file is kept the
same as the vendors naming, which means it's prefixed with exynos5422
instead of exynos5800 as the SoC name even though it includes the
exyno5800 dtsi.

Signed-off-by: Sjoerd Simons <sjoerd.simons@xxxxxxxxxxxxxxx>
---
Changes since v1:
 * Add chosen/linux,stdout-path to point the serial console device
 * Change memory start offset to 0x40000000 to match the vendors DTS (pointed
   out by Heesub Shin)
  * Declare base address & size for the memory banks to be used by the MFC

Changes since v2:
  * Correct hdmi supplies (spotted by Joonyoung Shim). This currently doesn't
    have a practical impact as all supplies are always-on, but makes the dts
    match the schematics.

 arch/arm/boot/dts/Makefile                 |   1 +
 arch/arm/boot/dts/exynos5422-odroidxu3.dts | 332 +++++++++++++++++++++++++++++
 2 files changed, 333 insertions(+)
 create mode 100644 arch/arm/boot/dts/exynos5422-odroidxu3.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 91bd5bd..df397c2 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -98,6 +98,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos3250-monk.dtb \
 	exynos5420-arndale-octa.dtb \
 	exynos5420-peach-pit.dtb \
 	exynos5420-smdk5420.dtb \
+	exynos5422-odroidxu3.dtb \
 	exynos5440-sd5v1.dtb \
 	exynos5440-ssdk5440.dtb \
 	exynos5800-peach-pi.dtb
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
new file mode 100644
index 0000000..c29123c
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
@@ -0,0 +1,332 @@
+/*
+ * Hardkernel Odroid XU3 board device tree source
+ *
+ * Copyright (c) 2014 Collabora Ltd.
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos5800.dtsi"
+
+/ {
+	model = "Hardkernel Odroid XU3";
+	compatible = "hardkernel,odroid-xu3", "samsung,exynos5800", "samsung,exynos5";
+
+	memory {
+		reg = <0x40000000 0x80000000>;
+	};
+
+	chosen {
+		linux,stdout-path = &serial_2;
+	};
+
+	fimd@14400000 {
+		status = "okay";
+	};
+
+	firmware@02073000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x02073000 0x1000>;
+	};
+
+	fixed-rate-clocks {
+		oscclk {
+			compatible = "samsung,exynos5420-oscclk";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	hsi2c_4: i2c@12CA0000 {
+		status = "okay";
+
+		s2mps11_pmic@66 {
+			compatible = "samsung,s2mps11-pmic";
+			reg = <0x66>;
+			s2mps11,buck2-ramp-delay = <12>;
+			s2mps11,buck34-ramp-delay = <12>;
+			s2mps11,buck16-ramp-delay = <12>;
+			s2mps11,buck6-ramp-enable = <1>;
+			s2mps11,buck2-ramp-enable = <1>;
+			s2mps11,buck3-ramp-enable = <1>;
+			s2mps11,buck4-ramp-enable = <1>;
+
+			s2mps11_osc: clocks {
+				#clock-cells = <1>;
+				clock-output-names = "s2mps11_ap",
+						"s2mps11_cp", "s2mps11_bt";
+			};
+
+			regulators {
+				ldo1_reg: LDO1 {
+					regulator-name = "vdd_ldo1";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo3_reg: LDO3 {
+					regulator-name = "vdd_ldo3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo5_reg: LDO5 {
+					regulator-name = "vdd_ldo5";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo6_reg: LDO6 {
+					regulator-name = "vdd_ldo6";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo7_reg: LDO7 {
+					regulator-name = "vdd_ldo7";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo8_reg: LDO8 {
+					regulator-name = "vdd_ldo8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo9_reg: LDO9 {
+					regulator-name = "vdd_ldo9";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-always-on;
+				};
+
+				ldo10_reg: LDO10 {
+					regulator-name = "vdd_ldo10";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo11_reg: LDO11 {
+					regulator-name = "vdd_ldo11";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo12_reg: LDO12 {
+					regulator-name = "vdd_ldo12";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo13_reg: LDO13 {
+					regulator-name = "vdd_ldo13";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				ldo15_reg: LDO15 {
+					regulator-name = "vdd_ldo15";
+					regulator-min-microvolt = <3100000>;
+					regulator-max-microvolt = <3100000>;
+					regulator-always-on;
+				};
+
+				ldo16_reg: LDO16 {
+					regulator-name = "vdd_ldo16";
+					regulator-min-microvolt = <2200000>;
+					regulator-max-microvolt = <2200000>;
+					regulator-always-on;
+				};
+
+				ldo17_reg: LDO17 {
+					regulator-name = "tsp_avdd";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo19_reg: LDO19 {
+					regulator-name = "vdd_sd";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				ldo24_reg: LDO24 {
+					regulator-name = "tsp_io";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				buck1_reg: BUCK1 {
+					regulator-name = "vdd_mif";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck2_reg: BUCK2 {
+					regulator-name = "vdd_arm";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck3_reg: BUCK3 {
+					regulator-name = "vdd_int";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck4_reg: BUCK4 {
+					regulator-name = "vdd_g3d";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck5_reg: BUCK5 {
+					regulator-name = "vdd_mem";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1400000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck6_reg: BUCK6 {
+					regulator-name = "vdd_kfc";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck7_reg: BUCK7 {
+					regulator-name = "vdd_1.0v_ldo";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck8_reg: BUCK8 {
+					regulator-name = "vdd_1.8v_ldo";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck9_reg: BUCK9 {
+					regulator-name = "vdd_2.8v_ldo";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3750000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck10_reg: BUCK10 {
+					regulator-name = "vdd_vmem";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+
+	i2c_2: i2c@12C80000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <66000>;
+		status = "okay";
+
+		hdmiddc@50 {
+			compatible = "samsung,exynos4210-hdmiddc";
+			reg = <0x50>;
+		};
+	};
+
+	rtc@101E0000 {
+		status = "okay";
+	};
+};
+
+&hdmi {
+	status = "okay";
+	hpd-gpio = <&gpx3 7 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_hpd_irq>;
+
+	vdd_osc-supply = <&ldo7_reg>;
+	vdd_pll-supply = <&ldo6_reg>;
+	vdd-supply = <&ldo6_reg>;
+};
+
+&mfc {
+	samsung,mfc-r = <0x43000000 0x800000>;
+	samsung,mfc-l = <0x51000000 0x800000>;
+};
+
+&mmc_0 {
+	status = "okay";
+	broken-cd;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+};
+
+&mmc_2 {
+	status = "okay";
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+	bus-width = <4>;
+	cap-sd-highspeed;
+};
+
+&pinctrl_0 {
+	hdmi_hpd_irq: hdmi-hpd-irq {
+		samsung,pins = "gpx3-7";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "host";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "otg";
+};
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux