If there is a DT node available for the root bridge's parent device, use the dma configuration from that device node. For example, keystone PCI devices would require dma_pfn_offset to be set correctly in the device structure of the pci device in order to have the correct dma mask. The DT node will have dma-ranges defined for this. Also support using the DT property dma-coherent to allow coherent DMA operation by the PCI device. This patch use the new helper function of_pci_dma_configure() to update the device dma configuration. Signed-off-by: Murali Karicheri <m-karicheri2@xxxxxx> --- drivers/pci/probe.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 23212f8..d7dcd6c 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -6,6 +6,7 @@ #include <linux/delay.h> #include <linux/init.h> #include <linux/pci.h> +#include <linux/of_pci.h> #include <linux/pci_hotplug.h> #include <linux/slab.h> #include <linux/module.h> @@ -1520,6 +1521,7 @@ void pci_device_add(struct pci_dev *dev, struct pci_bus *bus) dev->dev.dma_mask = &dev->dma_mask; dev->dev.dma_parms = &dev->dma_parms; dev->dev.coherent_dma_mask = 0xffffffffull; + of_pci_dma_configure(dev); pci_set_dma_max_seg_size(dev, 65536); pci_set_dma_seg_boundary(dev, 0xffffffff); -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
