Microchip KSZ8863/KSZ8873 have the ability to select between internal and external RMII reference clock. By default, reference clock needs to be provided via REFCLKI_3 pin. If required, device can be setup to provide RMII clock internally so that REFCLKI_3 pin can be left unconnected. Add a new "microchip,rmii-clk-internal" property which will set RMII clock reference to internal. If property is not set, reference clock needs to be provided externally. While at it, move the ksz8795_cpu_interface_select() to ksz8_config_cpu_port() to get a cleaner call path for cpu port. Signed-off-by: Ante Knezic <ante.knezic@xxxxxxxxxxx> --- drivers/net/dsa/microchip/ksz8795.c | 28 ++++++++++++++++++++++------ drivers/net/dsa/microchip/ksz8795_reg.h | 3 +++ 2 files changed, 25 insertions(+), 6 deletions(-) diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c index 4bf4d67557dc..b0a305b7c37e 100644 --- a/drivers/net/dsa/microchip/ksz8795.c +++ b/drivers/net/dsa/microchip/ksz8795.c @@ -1358,6 +1358,9 @@ static void ksz8795_cpu_interface_select(struct ksz_device *dev, int port) { struct ksz_port *p = &dev->ports[port]; + if (!ksz_is_ksz87xx(dev)) + return; + if (!p->interface && dev->compat_interface) { dev_warn(dev->dev, "Using legacy switch \"phy-mode\" property, because it is missing on port %d node. " @@ -1391,18 +1394,28 @@ void ksz8_port_setup(struct ksz_device *dev, int port, bool cpu_port) /* enable 802.1p priority */ ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_ENABLE, true); - if (cpu_port) { - if (!ksz_is_ksz88x3(dev)) - ksz8795_cpu_interface_select(dev, port); - + if (cpu_port) member = dsa_user_ports(ds); - } else { + else member = BIT(dsa_upstream_port(ds, port)); - } ksz8_cfg_port_member(dev, port, member); } +static void ksz88x3_config_rmii_clk(struct ksz_device *dev) +{ + bool rmii_clk_internal; + + if (!ksz_is_ksz88x3(dev)) + return; + + rmii_clk_internal = of_property_read_bool(dev->dev->of_node, + "microchip,rmii-clk-internal"); + + ksz_cfg(dev, KSZ88X3_REG_FVID_AND_HOST_MODE, + KSZ88X3_PORT3_RMII_CLK_INTERNAL, rmii_clk_internal); +} + void ksz8_config_cpu_port(struct dsa_switch *ds) { struct ksz_device *dev = ds->priv; @@ -1419,6 +1432,9 @@ void ksz8_config_cpu_port(struct dsa_switch *ds) ksz8_port_setup(dev, dev->cpu_port, true); + ksz8795_cpu_interface_select(dev, dev->cpu_port); + ksz88x3_config_rmii_clk(dev); + for (i = 0; i < dev->phy_port_cnt; i++) { ksz_port_stp_state_set(ds, i, BR_STATE_DISABLED); } diff --git a/drivers/net/dsa/microchip/ksz8795_reg.h b/drivers/net/dsa/microchip/ksz8795_reg.h index 3c9dae53e4d8..beca974e0171 100644 --- a/drivers/net/dsa/microchip/ksz8795_reg.h +++ b/drivers/net/dsa/microchip/ksz8795_reg.h @@ -22,6 +22,9 @@ #define KSZ8863_GLOBAL_SOFTWARE_RESET BIT(4) #define KSZ8863_PCS_RESET BIT(0) +#define KSZ88X3_REG_FVID_AND_HOST_MODE 0xC6 +#define KSZ88X3_PORT3_RMII_CLK_INTERNAL BIT(3) + #define REG_SW_CTRL_0 0x02 #define SW_NEW_BACKOFF BIT(7) -- 2.11.0