Document the LDB bridge subnode and add the subnode into the example. For the subnode to work, the block control must scan its subnodes and bind drivers to them, do not misuse either simple-bus or simple-mfd here. Signed-off-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx> --- .../soc/imx/fsl,imx93-media-blk-ctrl.yaml | 44 +++++++++++++++++++ 1 file changed, 44 insertions(+) diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml index b3554e7f9e76..5ba66dfb0e05 100644 --- a/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml @@ -24,6 +24,12 @@ properties: reg: maxItems: 1 + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + '#power-domain-cells': const: 1 @@ -46,9 +52,16 @@ properties: - const: csi - const: dsi + bridge@20: + type: object + $ref: /schemas/display/bridge/fsl,ldb.yaml# + unevaluatedProperties: false + required: - compatible - reg + - '#address-cells' + - '#size-cells' - power-domains - clocks - clock-names @@ -77,4 +90,35 @@ examples: clock-names = "apb", "axi", "nic", "disp", "cam", "pxp", "lcdif", "isi", "csi", "dsi"; #power-domain-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + + bridge@20 { + compatible = "fsl,imx93-ldb"; + reg = <0x20 0x4>, <0x24 0x4>; + reg-names = "ldb", "lvds"; + clocks = <&clk IMX93_CLK_LVDS_GATE>; + clock-names = "ldb"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ldb_from_lcdif2: endpoint { + remote-endpoint = <&lcdif2_to_ldb>; + }; + }; + + port@1 { + reg = <1>; + + ldb_lvds: endpoint { + remote-endpoint = <&ldb_to_panel>; + }; + }; + }; + }; }; -- 2.34.1