Re: [PATCH v2 2/3] ARM: dts: berlin: add PPI cpu mask to twd timer interrupts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 26.12.2014 09:58, Jisheng Zhang wrote:
According to the gic binding document, "bits[15:8] PPI interrupt cpu
mask.  Each bit corresponds to each of the 8 possible cpus attached to
the GIC.  A bit set to '1' indicated the interrupt is wired to that
CPU." This patch wants to add the PPI cpu mask for completeness.

Signed-off-by: Jisheng Zhang <jszhang@xxxxxxxxxxx>

Applied to berlin/dt.

Thanks!

---
  arch/arm/boot/dts/berlin2.dtsi   | 2 +-
  arch/arm/boot/dts/berlin2cd.dtsi | 2 +-
  arch/arm/boot/dts/berlin2q.dtsi  | 2 +-
  3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
index 015a06c..63d00a6 100644
--- a/arch/arm/boot/dts/berlin2.dtsi
+++ b/arch/arm/boot/dts/berlin2.dtsi
@@ -104,7 +104,7 @@
  		local-timer@ad0600 {
  			compatible = "arm,cortex-a9-twd-timer";
  			reg = <0xad0600 0x20>;
-			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
  			clocks = <&chip CLKID_TWD>;
  		};

diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi
index a318bc3..81b670a 100644
--- a/arch/arm/boot/dts/berlin2cd.dtsi
+++ b/arch/arm/boot/dts/berlin2cd.dtsi
@@ -76,7 +76,7 @@
  		local-timer@ad0600 {
  			compatible = "arm,cortex-a9-twd-timer";
  			reg = <0xad0600 0x20>;
-			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
  			clocks = <&chip CLKID_TWD>;
  		};

diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index 933dcbb..41a683f 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -112,7 +112,7 @@
  			compatible = "arm,cortex-a9-twd-timer";
  			reg = <0xad0600 0x20>;
  			clocks = <&chip CLKID_TWD>;
-			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
  		};

  		gic: interrupt-controller@ad1000 {


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux