The DFI unit can be used to measure DRAM utilization using perf. Add the
node to the device tree. The DFI needs a rockchip,pmu phandle to the pmu
containing registers for SDRAM configuration details. This is added in
this patch as well.
Reviewed-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
---
Notes:
Changes since v4:
- new patch
arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
index 5544f66c6ff41..e693a341f6f27 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
@@ -443,6 +443,11 @@ usb_host1_ohci: usb@fc8c0000 {
status = "disabled";
};
+ pmu1grf: syscon@fd58a000 {
+ compatible = "rockchip,rk3588-pmugrf", "syscon", "simple-mfd";
+ reg = <0x0 0xfd58a000 0x0 0x10000>;
+ };
+
sys_grf: syscon@fd58c000 {
compatible = "rockchip,rk3588-sys-grf", "syscon";
reg = <0x0 0xfd58c000 0x0 0x1000>;
@@ -1329,6 +1334,17 @@ pcie2x1l2_intc: legacy-interrupt-controller {
};
};
+ dfi: dfi@fe060000 {
+ reg = <0x00 0xfe060000 0x00 0x10000>;
+ compatible = "rockchip,rk3588-dfi";
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "ch0", "ch1", "ch2", "ch3";
+ rockchip,pmu = <&pmu1grf>;
+ };
+
gmac1: ethernet@fe1c0000 {
compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a";
reg = <0x0 0xfe1c0000 0x0 0x10000>;
--
2.39.2
