On 10/17/23 18:04, Konrad Dybcio wrote:
On 10/16/23 14:47, Nia Espera wrote:
Device tree files for OnePlus 9 and 9 Pro. Details of supported features
mentioned in the cover letter for this patch series, but for
accessibility also repeated here:
- USB OTG
- UFS
- Framebuffer display
- Touchscreen (for lemonade)
- Power & volume down keys
- Battery reading
- Modem, IPA, and remoteproc bringup
Steps to get booting:
- Wipe dtbo partition
- Flash vbmeta with disabled verity bit
- Flash kernel and initfs to boot partition with CLI args
pd_ignore_unused
and clk_ignore_unused
- Flash rootfs to some other partition (probably super or userdata)
Signed-off-by: Nia Espera <nespera@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/Makefile | 2 +
.../arm64/boot/dts/qcom/sm8350-oneplus-common.dtsi | 1247 ++++++++++
++++++++++
.../boot/dts/qcom/sm8350-oneplus-lemonade.dts | 82 ++
.../boot/dts/qcom/sm8350-oneplus-lemonadep.dts | 37 +
4 files changed, 1368 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/
qcom/Makefile
index 2cca20563a1d..369ad4721b29 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -211,6 +211,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8250-xiaomi-elish-
csot.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8350-hdk.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8350-microsoft-surface-duo2.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8350-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm8350-oneplus-lemonade.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm8350-oneplus-lemonadep.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8350-sony-xperia-sagami-pdx214.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8350-sony-xperia-sagami-pdx215.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8450-hdk.dtb
diff --git a/arch/arm64/boot/dts/qcom/sm8350-oneplus-common.dtsi b/
arch/arm64/boot/dts/qcom/sm8350-oneplus-common.dtsi
new file mode 100644
index 000000000000..2f6768f35259
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8350-oneplus-common.dtsi
@@ -0,0 +1,1247 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Caleb Connolly <caleb.connolly@xxxxxxxxxx>
+ *
+ * Copyright (c) 2023 Igalia S.L.
+ * Authors:
+ * Nia Espera <nespera@xxxxxxxxxx>
+ */
+
+#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pm8350b.h>
+#define SMB139x_1_SID 0x0b
+#define SMB139x_2_SID 0x0c
+#include <dt-bindings/iio/qcom,spmi-adc7-smb139x.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8350.dtsi"
+#include "pm8350.dtsi"
+#include "pm8350b.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
+#include "pmr735a.dtsi"
+#include "pmr735b.dtsi"
+
+/ {
+ /* As with the Sony devices, msm-id and board-id aren't needed
here */
This became "common knowledge" since then, we can omit the comment now.
+ chassis-type = "handset";
+ interrupt-parent = <&intc>;
+
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ framebuffer: framebuffer@e4d00000 {
+ compatible = "simple-framebuffer";
+ reg = <0 0xe4d00000 0 0x2400000>;
+ width = <1080>;
+ height = <2412>;
+ stride = <(1080 * 4)>;
+ format = "a8r8g8b8";
+ /*
+ * That's (going to be) a lot of clocks, but it's
+ * necessary due to unused clk cleanup & no panel
+ * driver yet.
+ */
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&vol_down_n>;
+
+ key-vol-up {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ gpios = <&pmk8350_gpios 6 GPIO_ACTIVE_LOW>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ wakeup-source;
+ };
+ };
+
+ bat: battery {
+ compatible = "simple-battery";
+ device-chemistry = "lithium-ion";
+ voltage-min-design-microvolt = <3200000>;
+ energy-full-design-microwatt-hours = <15840000>;
+ charge-full-design-microamp-hours = <2225000>;
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ display_panel_avdd: display_regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "display_panel_avdd";
+ regulator-min-microvolt = <5500000>;
+ regulator-max-microvolt = <5500000>;
+ regulator-enable-ramp-delay = <233>;
+
+ enable-active-high;
+ regulator-boot-on;
+ };
+
+ /*
+ * Hack; OP9 bootloader specifically checks that the timer node has
+ * this label.
+ */
+ arch_timer: timer {};
+};
+
+&reserved_memory {
+ /* EFI splash screen */
+ memory@e1000000 {
framebuffer@e10...
+ reg = <0 0xe4d00000 0 0x02400000>;
+ no-map;
+ label = "cont_splash_region";
This label is unnecessary (perhaps even unused?)
+ };
+
+ ramoops: ramoops@E9700000 {
+ compatible = "ramoops";
+ reg = <0 0xe9700000 0 0x05b8000>;
+ record-size = <0x40000>;
+ console-size = <0x40000>;
+ ftrace-size = <0x200000>;
+ pmsg-size = <0x200000>;
+ devinfo-size = <0x08000>;
+ dumpinfo-size = <0x08000>;
+ rsv01info-size= <0x08000>;
+ rsv02info-size= <0x08000>;
+ rsv03info-size= <0x08000>;
+ rsv04info-size= <0x08000>;
+ rsv05info-size= <0x08000>;
+ ecc-size= <0x0>;
Please use a single space before and after the '=' sign.
Please drop the unused-and-undocumented properties (make CHECK_DTBS=1
qcom/sm8350-oneplus-lemonade.dtb)
+ };
+
+ /* bootloader log buffer */
+ memory@9fff7000 {
bootloader-log@, drop comment
+ reg = <0x00 0x9fff7000 0x00 0x8000>;
please be consistent with the usage of "different zeroes"
+ };
+
+ /* unknown; "param_mem" downstream */
+ memory@ea700000 {
reserved@, drop comment, probably it's for the kernel command line
parameters in some hacky setup, but if so, it would be freed the moment
Linux is jumped to.
[...]
+
+ /* regulators-2 unused for now */
Any good reason?
To put everything "in order", pm8350b-rpmh-regulators sits here (with
pmic-id "d"). However it only has one regulator (pm8350b_ldo1) which is
entirely unused on the oneplus 9(p) and there's no driver for it
upstream. If this common tree is also good for the oneplus 9t, then that
regulator would be useful to have enabled.
+
+ regulators-3 {
+ compatible = "qcom,pmr735a-rpmh-regulators";
+ qcom,pmic-id = "e";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+
+ vdd-l1-l2-supply = <&pmr735a_s2>;
+ vdd-l3-supply = <&pmr735a_s1>;
+ vdd-l4-supply = <&pm8350c_s1>;
+ vdd-l5-l6-supply = <&pm8350c_s1>;
+ vdd-l7-bob-supply = <&vreg_bob>;
+
+ pmr735a_s1: smps1 {
+ regulator-name = "pmr735a_s1";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1280000>;
+ };
+
+ pmr735a_s2: smps2 {
+ regulator-name = "pmr735a_s2";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <976000>;
+ };
+
+ pmr735a_s3: smps3 {
+ regulator-name = "pmr735a_s3";
+ regulator-min-microvolt = <2208000>;
+ regulator-max-microvolt = <2352000>;
+ };
+
+ pmr735a_l1: ldo1 {
+ regulator-name = "pmr735a_l1";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ };
+
+ pmr735a_l2: ldo2 {
+ regulator-name = "pmr735a_l2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pmr735a_l3: ldo3 {
+ regulator-name = "pmr735a_l3";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pmr735a_l4: ldo4 {
+ regulator-name = "pmr735a_l4";
+ regulator-min-microvolt = <1776000>;
+ regulator-max-microvolt = <1872000>;
+ };
+
+ pmr735a_l5: ldo5 {
+ regulator-name = "pmr735a_l5";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ };
+
+ pmr735a_l6: ldo6 {
+ regulator-name = "pmr735a_l6";
+ regulator-min-microvolt = <480000>;
+ regulator-max-microvolt = <904000>;
+ };
+
+ pmr735a_l7: ldo7 {
+ regulator-name = "pmr735a_l7";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+ };
+};
+
+&adsp {
+ firmware-name = "qcom/OnePlus/lemonade/adsp.mbn";
+ status = "okay";
+};
+
+&cdsp {
+ firmware-name = "qcom/OnePlus/lemonade/cdsp.mbn";
+ status = "okay";
+};
+
+&slpi {
+ firmware-name = "qcom/OnePlus/lemonade/slpi.mbn";
+ status = "okay";
+};
+
+&ipa {
+ qcom,gsi-loader = "self";
+ memory-region = <&pil_ipa_fw_mem>;
+ firmware-name = "qcom/OnePlus/lemonade/ipa_fws.mbn";
+ status = "okay";
+};
+
+&mpss {
+ firmware-name = "qcom/OnePlus/lemonade/modem.mbn",
+ "qcom/OnePlus/lemonade/mcfg_hw.mbn";
+
+ status = "okay";
+};
+
+&i2c4 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ /* Touchscreens: Syna TCM oncell or Samsung s6sy761 */
Synaptics with a samsung panel? Are you sure it's not a reference device
dt leftover?
Seems like it; either samsung panel + samsung TS or samsung panel + syna
TS. Specifically, the 9p has a "mdss_dsi_samsung_amb670yf01_dsc_cmd"
specified in downstream; checking dmesg in Android confirms this is the
one that gets loaded.
[...]
+&pm8350_gpios {
+ usb2_vbus_boost_default: usb2_vbus_boost_default {
No underscores in node names, use '-', all throughout the file.
+ pins = "gpio8";
+ function = "normal";
+ output-low;
+ power-source = <0x00>; > + phandle = <0x5e1>;
Please drop the decompiler-generated phandle= properties
[...]
+ sde_dsi_active: sde-dsi-active {
+ pins = "gpio24";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable = <0>;
This is a boolean property, should be "bias-disable;"
[...]
+&usb_1 {
+ /* Bug in interconnect driver breaks USB */
+ /delete-property/ interconnects;
+ /delete-property/ interconnect-names;
Can you elaborate?
+
+ /*
+ * USB3 is not tested (though it is enabled downstream) so limit to
+ * high-speed for now.
+ */
+ qcom,select-utmi-as-pipe-clk;
+
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ /* Mode switching is untested */
+ dr_mode = "peripheral";
+ maximum-speed = "high-speed";
+ phys = <&usb_1_hsphy>;
+ phy-names = "usb2-phy";
+};
+
+&usb_1_hsphy {
+ vdda-pll-supply = <&pm8350_l5>;
+ vdda18-supply = <&pm8350c_l1>;
+ vdda33-supply = <&pm8350_l2>;
+
+ status = "okay";
+};
+
+/* Enabling this is necessary only for displayport */
If DP is wired up, I would strongly guess that USB3 is too.
+&usb_1_qmpphy {
+ vdda-phy-supply = <&pm8350_l6>;
+ vdda-pll-supply = <&pm8350_l1>;
+
+ status = "okay";
+};
+
+&i2c2 {
Please sort the node references alphabetically
+ clock-frequency = <100000>;
+ status = "okay";
+
+ bq27541: fuel-gauge@55 {
+ compatible = "ti,bq27541";
+ reg = <0x55>;
+ monitored-battery = <&bat>;
+ };
+};
+/* Crypto drivers currently fail & cause an XPU violation */
No need, see commit 4d29db2043610dd70be00a61f26fd64256a2a6c5
[...]
+ /* Modem antenna pins exclusive to lemonade */
+ rf_cable_ant1_active: rf_cable_ant1_active {
+ pins = "gpio27";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ rf_cable_ant2_active: rf_cable_ant2_active {
Please add a newline between subnodes
Konrad
Thanks!
