Device tree files for OnePlus 9 and 9 Pro. Details of supported features
mentioned in the cover letter for this patch series, but for
accessibility also repeated here:
- USB OTG
- UFS
- Framebuffer display
- Touchscreen (for lemonade)
- Power & volume down keys
- Battery reading
- Modem, IPA, and remoteproc bringup
Steps to get booting:
- Wipe dtbo partition
- Flash vbmeta with disabled verity bit
- Flash kernel and initfs to boot partition with CLI args pd_ignore_unused
and clk_ignore_unused
- Flash rootfs to some other partition (probably super or userdata)
Signed-off-by: Nia Espera <nespera@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/Makefile | 2 +
.../arm64/boot/dts/qcom/sm8350-oneplus-common.dtsi | 1247 ++++++++++++++++++++
.../boot/dts/qcom/sm8350-oneplus-lemonade.dts | 82 ++
.../boot/dts/qcom/sm8350-oneplus-lemonadep.dts | 37 +
4 files changed, 1368 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 2cca20563a1d..369ad4721b29 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -211,6 +211,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8250-xiaomi-elish-csot.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8350-hdk.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8350-microsoft-surface-duo2.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8350-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm8350-oneplus-lemonade.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm8350-oneplus-lemonadep.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8350-sony-xperia-sagami-pdx214.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8350-sony-xperia-sagami-pdx215.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8450-hdk.dtb
diff --git a/arch/arm64/boot/dts/qcom/sm8350-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sm8350-oneplus-common.dtsi
new file mode 100644
index 000000000000..2f6768f35259
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8350-oneplus-common.dtsi
@@ -0,0 +1,1247 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Caleb Connolly <caleb.connolly@xxxxxxxxxx>
+ *
+ * Copyright (c) 2023 Igalia S.L.
+ * Authors:
+ * Nia Espera <nespera@xxxxxxxxxx>
+ */
+
+#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pm8350b.h>
+#define SMB139x_1_SID 0x0b
+#define SMB139x_2_SID 0x0c
+#include <dt-bindings/iio/qcom,spmi-adc7-smb139x.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8350.dtsi"
+#include "pm8350.dtsi"
+#include "pm8350b.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
+#include "pmr735a.dtsi"
+#include "pmr735b.dtsi"
+
+/ {
+ /* As with the Sony devices, msm-id and board-id aren't needed here */
+ chassis-type = "handset";
+ interrupt-parent = <&intc>;
+
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ framebuffer: framebuffer@e4d00000 {
+ compatible = "simple-framebuffer";
+ reg = <0 0xe4d00000 0 0x2400000>;
+ width = <1080>;
+ height = <2412>;
+ stride = <(1080 * 4)>;
+ format = "a8r8g8b8";
+ /*
+ * That's (going to be) a lot of clocks, but it's
+ * necessary due to unused clk cleanup & no panel
+ * driver yet.
+ */
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&vol_down_n>;
+
+ key-vol-up {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ gpios = <&pmk8350_gpios 6 GPIO_ACTIVE_LOW>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ wakeup-source;
+ };
+ };
+
+ bat: battery {
+ compatible = "simple-battery";
+ device-chemistry = "lithium-ion";
+ voltage-min-design-microvolt = <3200000>;
+ energy-full-design-microwatt-hours = <15840000>;
+ charge-full-design-microamp-hours = <2225000>;
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ display_panel_avdd: display_regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "display_panel_avdd";
+ regulator-min-microvolt = <5500000>;
+ regulator-max-microvolt = <5500000>;
+ regulator-enable-ramp-delay = <233>;
+
+ enable-active-high;
+ regulator-boot-on;
+ };
+
+ /*
+ * Hack; OP9 bootloader specifically checks that the timer node has
+ * this label.
+ */
+ arch_timer: timer {};
+};
+
+&reserved_memory {
+ /* EFI splash screen */
+ memory@e1000000 {
+ reg = <0 0xe4d00000 0 0x02400000>;
+ no-map;
+ label = "cont_splash_region";
+ };
+
+ ramoops: ramoops@E9700000 {
+ compatible = "ramoops";
+ reg = <0 0xe9700000 0 0x05b8000>;
+ record-size = <0x40000>;
+ console-size = <0x40000>;
+ ftrace-size = <0x200000>;
+ pmsg-size = <0x200000>;
+ devinfo-size = <0x08000>;
+ dumpinfo-size = <0x08000>;
+ rsv01info-size= <0x08000>;
+ rsv02info-size= <0x08000>;
+ rsv03info-size= <0x08000>;
+ rsv04info-size= <0x08000>;
+ rsv05info-size= <0x08000>;
+ ecc-size= <0x0>;
+ };
+
+ /* bootloader log buffer */
+ memory@9fff7000 {
+ reg = <0x00 0x9fff7000 0x00 0x8000>;
+ };
+
+ /* unknown; "param_mem" downstream */
+ memory@ea700000 {
+ reg = <0x00 0xea700000 0x00 0x800000>;
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm8350-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-s9-supply = <&vph_pwr>;
+ vdd-s10-supply = <&vph_pwr>;
+ vdd-s11-supply = <&vph_pwr>;
+ vdd-s12-supply = <&vph_pwr>;
+
+ vdd-l1-l4-supply = <&pm8350_s11>;
+ vdd-l2-l7-supply = <&vreg_bob>;
+ vdd-l3-l5-supply = <&vreg_bob>;
+ vdd-l6-l9-l10-supply = <&pm8350_s11>;
+ vdd-l8-supply = <&pmr735a_s2>;
+
+ /*
+ * ARC regulators:
+ * S5 - mx.lvl
+ * S6 - gfx.lvl
+ * S9 - mxc.lvl
+ */
+
+ pm8350_s10: smps10 {
+ regulator-name = "pm8350_s10";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350_s11: smps11 {
+ regulator-name = "pm8350_s11";
+ regulator-min-microvolt = <752000>;
+ regulator-max-microvolt = <1012000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350_s12: smps12 {
+ regulator-name = "pm8350_s12";
+ regulator-min-microvolt = <1224000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350_l1: ldo1 {
+ regulator-name = "pm8350_l1";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350_l2: ldo2 {
+ regulator-name = "pm8350_l2";
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350_l3: ldo3 {
+ regulator-name = "pm8350_l3";
+ regulator-min-microvolt = <904000>;
+ regulator-max-microvolt = <904000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ /* L4 - lmx.lvl (ARC) */
+
+ pm8350_l5: ldo5 {
+ regulator-name = "pm8350_l5";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <888000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350_l6: ldo6 {
+ regulator-name = "pm8350_l6";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1208000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350_l7: ldo7 {
+ regulator-name = "pm8350_l7";
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ /* L8 - lcx.lvl (ARC) */
+
+ pm8350_l9: ldo9 {
+ regulator-name = "pm8350_l9";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8350c-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-s9-supply = <&vph_pwr>;
+ vdd-s10-supply = <&vph_pwr>;
+
+ vdd-l1-l12-supply = <&pm8350c_s1>;
+ vdd-l2-l8-supply = <&pm8350c_s1>;
+ vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+ vdd-l6-l9-l11-supply = <&vreg_bob>;
+ vdd-l10-supply = <&pm8350_s12>;
+
+ vdd-bob-supply = <&vph_pwr>;
+
+ pm8350c_s1: smps1 {
+ regulator-name = "pm8350c_s1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1952000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ /* S2 - ebi.lvl (ARC) */
+
+ pm8350c_s3: smps3 {
+ regulator-name = "pm8350c_s3";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <704000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ /*
+ * ARC regulators:
+ * S4 - mss.lvl
+ * S6 - cx.lvl
+ * S8 - mmcx.lvl
+ */
+
+ pm8350c_s10: smps10 {
+ regulator-name = "pm8350c_s10";
+ regulator-min-microvolt = <1048000>;
+ regulator-max-microvolt = <1128000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350c_l1: ldo1 {
+ regulator-name = "pm8350c_l1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350c_l2: ldo2 {
+ regulator-name = "pm8350c_l2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350c_l3: ldo3 {
+ regulator-name = "pm8350c_l3";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350c_l4: ldo4 {
+ regulator-name = "pm8350c_l4";
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350c_l5: ldo5 {
+ regulator-name = "pm8350c_l5";
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350c_l6: ldo6 {
+ regulator-name = "pm8350c_l6";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350c_l7: ldo7 {
+ regulator-name = "pm8350c_l7";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350c_l8: ldo8 {
+ regulator-name = "pm8350c_l8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350c_l9: ldo9 {
+ regulator-name = "pm8350c_l9";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350c_l10: ldo10 {
+ regulator-name = "pm8350c_l10";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350c_l11: ldo11 {
+ regulator-name = "pm8350c_l11";
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350c_l12: ldo12 {
+ regulator-name = "pm8350c_l12";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pm8350c_l13: ldo13 {
+ regulator-name = "pm8350c_l13";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_bob: bob {
+ regulator-name = "vreg_bob";
+ regulator-min-microvolt = <3400000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+ };
+ };
+
+ /* regulators-2 unused for now */
+
+ regulators-3 {
+ compatible = "qcom,pmr735a-rpmh-regulators";
+ qcom,pmic-id = "e";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+
+ vdd-l1-l2-supply = <&pmr735a_s2>;
+ vdd-l3-supply = <&pmr735a_s1>;
+ vdd-l4-supply = <&pm8350c_s1>;
+ vdd-l5-l6-supply = <&pm8350c_s1>;
+ vdd-l7-bob-supply = <&vreg_bob>;
+
+ pmr735a_s1: smps1 {
+ regulator-name = "pmr735a_s1";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1280000>;
+ };
+
+ pmr735a_s2: smps2 {
+ regulator-name = "pmr735a_s2";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <976000>;
+ };
+
+ pmr735a_s3: smps3 {
+ regulator-name = "pmr735a_s3";
+ regulator-min-microvolt = <2208000>;
+ regulator-max-microvolt = <2352000>;
+ };
+
+ pmr735a_l1: ldo1 {
+ regulator-name = "pmr735a_l1";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ };
+
+ pmr735a_l2: ldo2 {
+ regulator-name = "pmr735a_l2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pmr735a_l3: ldo3 {
+ regulator-name = "pmr735a_l3";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pmr735a_l4: ldo4 {
+ regulator-name = "pmr735a_l4";
+ regulator-min-microvolt = <1776000>;
+ regulator-max-microvolt = <1872000>;
+ };
+
+ pmr735a_l5: ldo5 {
+ regulator-name = "pmr735a_l5";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ };
+
+ pmr735a_l6: ldo6 {
+ regulator-name = "pmr735a_l6";
+ regulator-min-microvolt = <480000>;
+ regulator-max-microvolt = <904000>;
+ };
+
+ pmr735a_l7: ldo7 {
+ regulator-name = "pmr735a_l7";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+ };
+};
+
+&adsp {
+ firmware-name = "qcom/OnePlus/lemonade/adsp.mbn";
+ status = "okay";
+};
+
+&cdsp {
+ firmware-name = "qcom/OnePlus/lemonade/cdsp.mbn";
+ status = "okay";
+};
+
+&slpi {
+ firmware-name = "qcom/OnePlus/lemonade/slpi.mbn";
+ status = "okay";
+};
+
+&ipa {
+ qcom,gsi-loader = "self";
+ memory-region = <&pil_ipa_fw_mem>;
+ firmware-name = "qcom/OnePlus/lemonade/ipa_fws.mbn";
+ status = "okay";
+};
+
+&mpss {
+ firmware-name = "qcom/OnePlus/lemonade/modem.mbn",
+ "qcom/OnePlus/lemonade/mcfg_hw.mbn";
+
+ status = "okay";
+};
+
+&i2c4 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ /* Touchscreens: Syna TCM oncell or Samsung s6sy761 */
+};
+
+&i2c13 {
+ clock-frequency = <100000>;
+ status = "okay";
+
+ fsa4480@42 {
+ compatible = "fcs,fsa4480";
+ reg = <0x42>;
+ mode-switch;
+ orientation-switch;
+ };
+
+ /* Qualcomm PM8008i/PM8008j (?) @ 8, 9, c, d */
+};
+
+&i2c15 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ /* sn-nci NFC controller @ 28 */
+};
+
+&pm8350_gpios {
+ usb2_vbus_boost_default: usb2_vbus_boost_default {
+ pins = "gpio8";
+ function = "normal";
+ output-low;
+ power-source = <0x00>;
+ phandle = <0x5e1>;
+ };
+
+ usb2_vbus_det_default: usb2_vbus_det_default {
+ pins = "gpio9";
+ function = "normal";
+ input-enable;
+ bias-disable;
+ power-source = <0x00>;
+ phandle = <0x5e0>;
+ };
+
+ gpio1_adc_default: gpio1-adc-default {
+ pins = "gpio1";
+ function = "normal";
+ bias-high-impedance;
+ bias-disable;
+ phandle = <0x566>;
+ };
+
+ gpio3_adc_default: gpio3-adc-default {
+ pins = "gpio3";
+ function = "normal";
+ bias-high-impedance;
+ bias-disable;
+ phandle = <0x567>;
+ };
+};
+
+&pm8350b_gpios {
+ vol_down_n: vol-down-n-state {
+ pins = "gpio6";
+ function = "normal";
+ power-source = <1>;
+ bias-pull-up;
+ input-enable;
+ };
+};
+
+&pmk8350_rtc {
+ status = "okay";
+};
+
+&pmk8350_vadc {
+ pinctrl-0 = <&gpio1_adc_default &gpio1_adc_default>;
+ pinctrl-names = "default";
+
+ pmk8350_ref_gnd {
+ reg = <0x00>;
+ label = "pmk8350_ref_gnd";
+ qcom,pre-scaling = <0x01 0x01>;
+ };
+
+ pmk8350_vref_1p25 {
+ reg = <0x01>;
+ label = "pmk8350_vref_1p25";
+ qcom,pre-scaling = <0x01 0x01>;
+ };
+
+ pmk8350_die_temp {
+ reg = <0x03>;
+ label = "pmk8350_die_temp";
+ qcom,pre-scaling = <0x01 0x01>;
+ };
+
+ pmk8350_xo_therm {
+ reg = <0x44>;
+ label = "pmk8350_xo_therm";
+ qcom,ratiometric;
+ qcom,hw-settle-time = <0xc8>;
+ qcom,pre-scaling = <0x01 0x01>;
+ };
+
+ pm8350_ref_gnd {
+ reg = <0x100>;
+ label = "pm8350_ref_gnd";
+ qcom,pre-scaling = <0x01 0x01>;
+ };
+
+ pm8350_vref_1p25 {
+ reg = <0x101>;
+ label = "pm8350_vref_1p25";
+ qcom,pre-scaling = <0x01 0x01>;
+ };
+
+ pm8350_die_temp {
+ reg = <0x103>;
+ label = "pm8350_die_temp";
+ qcom,pre-scaling = <0x01 0x01>;
+ };
+
+ pm8350_vph_pwr {
+ reg = <0x18e>;
+ label = "pm8350_vph_pwr";
+ qcom,pre-scaling = <0x01 0x03>;
+ };
+
+ pm8350b_ref_gnd {
+ reg = <0x300>;
+ label = "pm8350b_ref_gnd";
+ qcom,pre-scaling = <0x01 0x01>;
+ };
+
+ pm8350b_vref_1p25 {
+ reg = <0x301>;
+ label = "pm8350b_vref_1p25";
+ qcom,pre-scaling = <0x01 0x01>;
+ };
+
+ pm8350b_die_temp {
+ reg = <0x303>;
+ label = "pm8350b_die_temp";
+ qcom,pre-scaling = <0x01 0x01>;
+ };
+
+ pm8350b_vph_pwr {
+ reg = <0x38e>;
+ label = "pm8350b_vph_pwr";
+ qcom,pre-scaling = <0x01 0x03>;
+ };
+
+ pm8350b_vbat_sns {
+ reg = <0x38f>;
+ label = "pm8350b_vbat_sns";
+ qcom,pre-scaling = <0x01 0x03>;
+ };
+
+ pm8350_msm_therm {
+ reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
+ label = "pm8350_msm_therm";
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ };
+
+ pm8350_cam_flash_therm {
+ reg = <PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
+ label = "pm8350_cam_flash_therm";
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ };
+
+ pm8350_hot_pocket_therm {
+ reg = <PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
+ label = "pm8350_hot_pocket_therm";
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ };
+
+ pm8350_wide_rfc_therm {
+ reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
+ label = "pm8350_wide_rfc_therm";
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ };
+
+ pm8350_rear_tof_therm {
+ reg = <PM8350_ADC7_AMUX_THM5_100K_PU(1)>;
+ label = "pm8350_rear_tof_therm";
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ };
+
+ pm8350b_usb_conn_therm {
+ reg = <PM8350B_ADC7_AMUX_THM4_100K_PU>;
+ label = "pm8350b_usb_conn_therm";
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ };
+
+ pm8350b_wl_chg_therm {
+ reg = <PM8350B_ADC7_GPIO2_100K_PU>;
+ label = "pm8350b_wl_chg_therm";
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ };
+
+ pm8350b_chg_temp {
+ reg = <PM8350B_ADC7_CHG_TEMP>;
+ label = "pm8350b_chg_temp";
+ qcom,pre-scaling = <1 1>;
+ };
+
+ pmr735a_ref_gnd {
+ reg = <0x400>;
+ label = "pmr735a_ref_gnd";
+ qcom,pre-scaling = <0x01 0x01>;
+ };
+
+ pmr735a_vref_1p25 {
+ reg = <0x401>;
+ label = "pmr735a_vref_1p25";
+ qcom,pre-scaling = <0x01 0x01>;
+ };
+
+ pmr735a_die_temp {
+ reg = <0x403>;
+ label = "pmr735a_die_temp";
+ qcom,pre-scaling = <0x01 0x01>;
+ };
+
+ pmr735b_ref_gnd {
+ reg = <0x500>;
+ label = "pmr735b_ref_gnd";
+ qcom,pre-scaling = <0x01 0x01>;
+ };
+
+ pmr735b_vref_1p25 {
+ reg = <0x501>;
+ label = "pmr735b_vref_1p25";
+ qcom,pre-scaling = <0x01 0x01>;
+ };
+
+ pmr735b_die_temp {
+ reg = <0x503>;
+ label = "pmr735b_die_temp";
+ qcom,pre-scaling = <0x01 0x01>;
+ };
+
+ smb139x_1_smb_temp {
+ reg = <SMB139x_1_ADC7_SMB_TEMP>;
+ label = "smb139x_1_smb_temp";
+ qcom,pre-scaling = <1 1>;
+ };
+
+ smb139x_2_smb_temp {
+ reg = <SMB139x_2_ADC7_SMB_TEMP>;
+ label = "smb139x_2_smb_temp";
+ qcom,pre-scaling = <1 1>;
+ };
+
+ gpio1_v {
+ reg = <0x128>;
+ label = "gpio1_v";
+ qcom,ratiometric;
+ qcom,hw-settle-time = <0x2bc>;
+ qcom,pre-scaling = <0x01 0x01>;
+ };
+
+ gpio3_v {
+ reg = <0x12b>;
+ label = "gpio3_v";
+ qcom,ratiometric;
+ qcom,hw-settle-time = <0x2bc>;
+ qcom,pre-scaling = <0x01 0x01>;
+ };
+};
+
+&pmk8350_adc_tm {
+ status = "okay";
+
+ pm8350_msm_therm {
+ reg = <0x144>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <0xc8>;
+ };
+
+ pm8350_cam_flash_therm {
+ reg = <0x145>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <0xc8>;
+ };
+
+ pm8350_hot_pocket_therm {
+ reg = <0x146>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <0xc8>;
+ };
+
+ pm8350_wide_rfc_therm {
+ reg = <0x147>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <0xc8>;
+ };
+
+ pm8350_rear_tof_therm {
+ reg = <0x148>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <0xc8>;
+ };
+
+ pm8350b_usb_conn_therm {
+ reg = <0x347>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <0xc8>;
+ };
+
+ pm8350b_wl_chg_therm {
+ reg = <0x34b>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <0xc8>;
+ };
+
+ pmk8350_xo_therm {
+ reg = <0x44>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <0xc8>;
+ };
+};
+
+&pon_pwrkey {
+ status = "okay";
+};
+
+&pon_resin {
+ linux,code = <KEY_VOLUMEUP>;
+ status = "okay";
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&qupv3_id_2 {
+ status = "okay";
+};
+
+&gpi_dma0 {
+ status = "okay";
+};
+
+&gpi_dma1 {
+ status = "okay";
+};
+
+&gpi_dma2 {
+ status = "okay";
+};
+
+&removed_mem {
+ reg = <0x0 0xd8800000 0x0 0x8e00000>;
+};
+
+&tlmm {
+ gpio-reserved-ranges = <52 8>;
+
+ pcie0_default_state: pcie0-default-state {
+ perst-pins {
+ pins = "gpio94";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ clkreq-pins {
+ pins = "gpio95";
+ function = "pcie0_clkreqn";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ wake-pins {
+ pins = "gpio96";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ sleep-pins {
+ pins = "gpio95";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ pcie1_default_state: pcie1-default-state {
+ perst-pins {
+ pins = "gpio97";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ clkreq-pins {
+ pins = "gpio98";
+ function = "pcie1_clkreqn";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ wake-pins {
+ pins = "gpio99";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ /* wil6210_refclk_en_pin lives here also */
+ };
+ };
+
+ tp_rst_active: tp_rst_active {
+ pins = "gpio22";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ /* tp_rst_suspend pin is different per device, don't specify here */
+
+ tp_irq_active: tp_irq_active {
+ pins = "gpio23";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ input-enable;
+ };
+
+ tp_irq_suspend: tp_irq_suspend {
+ pins = "gpio23";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ sde_dsi_active: sde-dsi-active {
+ pins = "gpio24";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable = <0>;
+ };
+
+ sde_dsi_suspend: sde-dsi-suspend {
+ pins = "gpio24";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ sde_te_active: sde-te-active {
+ pins = "gpio82";
+ function = "mdp_vsync";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ sde_te_suspend: sde-te-suspend {
+ pins = "gpio82";
+ function = "mdp_vsync";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ aw_irq: aw_irq {
+ pins = "gpio14";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ aw_reset: aw_reset {
+ pins = "gpio75";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ display_panel_avdd_default: display_panel_avdd_default {
+ pins = "gpio12";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable = <0>;
+ output-high;
+ };
+
+ /* Modem-related pin common on both devices */
+ rf_cable_ant0_active: rf_cable_ant0_active {
+ pins = "gpio165";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ usb_int_default: usb_int_default {
+ pins = "gpio198";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ input-enable;
+ };
+
+ qupv3_se18_default_cts: qupv3_se18_default_cts {
+ pins = "gpio68";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ qupv3_se18_default_rtsrx: qupv3_se18_default_rtsrx {
+ pins = "gpio69", "gpio71";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ qupv3_se18_default_tx: qupv3_se18_default_tx {
+ pins = "gpio70";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qupv3_se18_ctsrx: qupv3_se18_ctsrx {
+ pins = "gpio68", "gpio71";
+ function = "qup18";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ qupv3_se18_rts: qupv3_se18_rts {
+ pins = "gpio69";
+ function = "qup18";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ qupv3_se18_tx: qupv3_se18_tx {
+ pins = "gpio70";
+ function = "qup18";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ usb3phy_portselect_default: usb3phy_portselect_default {
+ pins = "gpio81";
+ function = "usb_phy";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ usb3phy_portselect_gpio: usb3phy_portselect_gpio {
+ pins = "gpio81";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ ext1_otg_default: ext1_otg_default {
+ pins = "gpio8";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-pull-down;
+ input-enable;
+ };
+
+ cnss_wlan_en_active: cnss_wlan_en_active {
+ pins = "gpio64";
+ function = "gpio";
+ drive-strength = <16>;
+ output-high;
+ bias-pull-up;
+ };
+
+ cnss_wlan_en_sleep: cnss_wlan_en_sleep {
+ pins = "gpio64";
+ function = "gpio";
+ drive-strength = <2>;
+ output-low;
+ bias-pull-down;
+ };
+
+ bt_en_sleep: bt_en_sleep {
+ pins = "gpio65";
+ function = "gpio";
+ drive-strength = <2>;
+ output-low;
+ bias-pull-down;
+ };
+};
+
+&ufs_mem_hc {
+ reset-gpios = <&tlmm 203 GPIO_ACTIVE_LOW>;
+
+ vcc-supply = <&pm8350_l7>;
+ vcc-voltage-level = <2504000 2950000>;
+ vcc-max-microamp = <800000>;
+ vccq-supply = <&pm8350_l9>;
+ vccq-max-microamp = <900000>;
+
+ qcom,vddp-ref-clk-supply = <&pm8350_l9>;
+ qcom,vddp-ref-clk-max-microamp = <100>;
+
+ qcom,vddp-ref-clk-supply = <&pm8350_s12>;
+ qcom,vccq-parent-max-microamp = <210000>;
+
+ status = "okay";
+};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&pm8350_l5>;
+ vdda-phy-always-on;
+ vdda-max-microamp = <91600>;
+ vdda-pll-supply = <&pm8350_l6>;
+ vdda-pll-max-microamp = <19000>;
+
+ status = "okay";
+};
+
+&usb_1 {
+ /* Bug in interconnect driver breaks USB */
+ /delete-property/ interconnects;
+ /delete-property/ interconnect-names;
+
+ /*
+ * USB3 is not tested (though it is enabled downstream) so limit to
+ * high-speed for now.
+ */
+ qcom,select-utmi-as-pipe-clk;
+
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ /* Mode switching is untested */
+ dr_mode = "peripheral";
+ maximum-speed = "high-speed";
+ phys = <&usb_1_hsphy>;
+ phy-names = "usb2-phy";
+};
+
+&usb_1_hsphy {
+ vdda-pll-supply = <&pm8350_l5>;
+ vdda18-supply = <&pm8350c_l1>;
+ vdda33-supply = <&pm8350_l2>;
+
+ status = "okay";
+};
+
+/* Enabling this is necessary only for displayport */
+&usb_1_qmpphy {
+ vdda-phy-supply = <&pm8350_l6>;
+ vdda-pll-supply = <&pm8350_l1>;
+
+ status = "okay";
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ status = "okay";
+
+ bq27541: fuel-gauge@55 {
+ compatible = "ti,bq27541";
+ reg = <0x55>;
+ monitored-battery = <&bat>;
+ };
+};
+/* Crypto drivers currently fail & cause an XPU violation */
+&cryptobam {
+ status = "disabled";
+};
+
+&crypto {
+ status = "disabled";
+};
+
+&pcie0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie0_default_state>;
+
+ perst-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
+ wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+
+ status = "okay";
+};
+
+&pcie0_phy {
+ vdda-phy-supply = <&pm8350_l5>;
+ vdda-pll-supply = <&pm8350_l6>;
+
+ status = "okay";
+};
+
+&pcie1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie1_default_state>;
+
+ perst-gpios = <&tlmm 97 GPIO_ACTIVE_HIGH>;
+ wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+
+ status = "okay";
+};
+
+&pcie1_phy {
+ vdda-phy-supply = <&pm8350_l5>;
+ vdda-pll-supply = <&pm8350_l6>;
+
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8350-oneplus-lemonade.dts b/arch/arm64/boot/dts/qcom/sm8350-oneplus-lemonade.dts
new file mode 100644
index 000000000000..f2c27894f3c4
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8350-oneplus-lemonade.dts
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Igalia S.L.
+ * Authors:
+ * Nia Espera <nespera@xxxxxxxxxx>
+ */
+
+/dts-v1/;
+
+#include "sm8350-oneplus-common.dtsi"
+
+/ {
+ model = "OnePlus 9";
+ compatible = "oneplus,lemonade", "qcom,sm8350";
+};
+
+&i2c4 {
+ touchscreen@48 {
+ compatible = "samsung,s6sy761";
+ reg = <0x48>;
+ interrupts-extended = <&tlmm 23 0x2008>;
+
+ vdd-supply = <&pm8350c_l8>;
+ avdd-supply = <&pm8350c_l13>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&tp_rst_active &tp_irq_active>;
+ pinctrl-1 = <&tp_rst_suspend &tp_irq_suspend>;
+ };
+};
+
+&tlmm {
+ tp_rst_suspend: tp_rst_suspend {
+ pins = "gpio22";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ tp_enable_2v8: tp_enable_2v8 {
+ pins = "gpio74";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ output-high;
+ };
+
+ /* Modem antenna pins exclusive to lemonade */
+ rf_cable_ant1_active: rf_cable_ant1_active {
+ pins = "gpio27";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ rf_cable_ant2_active: rf_cable_ant2_active {
+ pins = "gpio92";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ rf_cable_ant3_active: rf_cable_ant3_active {
+ pins = "gpio44";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ rf_cable_ant7_active: rf_cable_ant7_active {
+ pins = "gpio155";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+};
+
+&mpss {
+ pinctrl-names = "default";
+ pinctrl-1 = <&rf_cable_ant0_active
+ &rf_cable_ant1_active
+ &rf_cable_ant2_active
+ &rf_cable_ant3_active
+ &rf_cable_ant7_active>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8350-oneplus-lemonadep.dts b/arch/arm64/boot/dts/qcom/sm8350-oneplus-lemonadep.dts
new file mode 100644
index 000000000000..de8597d26091
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8350-oneplus-lemonadep.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Igalia S.L.
+ * Authors:
+ * Nia Espera <nespera@xxxxxxxxxx>
+ */
+
+/dts-v1/;
+
+#include "sm8350-oneplus-common.dtsi"
+
+/ {
+ model = "OnePlus 9 Pro";
+ compatible = "oneplus,lemonadep", "qcom,sm8350";
+};
+
+&tlmm {
+ tp_rst_suspend: tp_rst_suspend {
+ pins = "gpio22";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-down;
+ };
+
+ tp_enable_2v8: tp_enable_2v8 {
+ pins = "gpio31";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ output-high;
+ };
+};
+
+&mpss {
+ pinctrl-names = "default";
+ pinctrl-1 = <&rf_cable_ant0_active>;
+};
--
2.42.0
