Re: [RFC 1/8] dt-bindings: usb: qcom,dwc3: Add bindings to enable runtime

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 17/10/2023 15:18, Krishna Kurapati wrote:
> Add enable-rt binding to let the device register vendor hooks to
> core and facilitate runtime suspend and resume.
> 
> Signed-off-by: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/usb/qcom,dwc3.yaml | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
> index cb50261c6a36..788d9c510abc 100644
> --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
> +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
> @@ -151,6 +151,11 @@ properties:
>        HS/FS/LS modes are supported.
>      type: boolean
>  
> +  qcom,enable-rt:
> +    description:
> +      If present, register vendor hooks to facilitate runtime suspend/resume

You described the desired Linux feature or behavior, not the actual
hardware. The bindings are about the latter, so instead you need to
rephrase the property and its description to match actual hardware
capabilities/features/configuration etc.

Best regards,
Krzysztof





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux