The BeaglePlay board by BeagleBoard.org has a CC1352P7 co-processor
connected to the main AM62 (running Linux) over UART. In the BeagleConnect
Technology, CC1352 is responsible for handling 6LoWPAN communication with
beagleconnect freedom nodes as well as their discovery.
This mcu is used by gb-beagleplay, a Greybus driver for BeaglePlay.
Signed-off-by: Ayush Singh <ayushdevel1325@xxxxxxxxx>
---
arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
index 7cfdf562b53b..d2e0b11242b6 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
@@ -870,6 +870,12 @@ &main_uart6 {
pinctrl-names = "default";
pinctrl-0 = <&wifi_debug_uart_pins_default>;
status = "okay";
+
+ mcu {
+ compatible = "ti,cc1352p7";
+ reset-gpios = <&main_gpio0 72 GPIO_ACTIVE_LOW>;
+ vdds-supply = <&vdd_3v3>;
+ };
};
&dss {
--
2.41.0
