BeagleConnect is both a technology concept and a line of board designs that implement the technology. Born from Greybus, a mechanism for dynamically extending a Linux system with embedded peripherals, BeagleConnect adds two key elements: a 6LoWPAN transport and mikroBUS manifests. The 6LoWPAN transport provides for arbitrary connections, including the IEEE802.15.4g long-range wireless transport supported between BeaglePlay and BeagleConnect Freedom (the first BeagleConnect board design). The mikroBUS manifests provide for rapid prototyping and low-node-count production with sensor boards following the mikroBUS freely-licensable embedded bus standard such that existing Linux drivers can be loaded upon Greybus discovery of the nodes. This patch set provides the Linux-side hooks required for the 6LoWPAN transport for BeagleConnect on BeaglePlay. Also adds required devicetree additions. Tested over `next-20230825`. Link: https://programmershideaway.xyz/tags/gsoc23/ GSoC23 Blog Link: https://git.beagleboard.org/gsoc/greybus/cc1352-firmware Zephyr App Link: https://github.com/Ayush1325/linux/tree/gb-beagleplay GitHub Branch Link: https://docs.beagleboard.org/latest/boards/beagleconnect/index.html BeagleConnect Link: https://docs.beagleboard.org/latest/boards/beagleplay/index.html BeaglePlay Link: https://github.com/Ayush1325/linux/tree/gb-beagleplay Github Repo Link: https://lists.linaro.org/archives/list/greybus-dev@xxxxxxxxxxxxxxxx/thread/5RQV7OG5KI4BQWRN5ZCGZIFRMM6ERKPP/ Patch v8 Changes in Patch v9 v8 -> v9: - Some capitalization in dt-bindings - add reset-gpios and vdds-supply to beagleplay device tree v7 -> v8: - fix clocks - fix reset-gpios - depend on serdev v6 -> v7: - Drop speed variable - Fix commit message - add clock-names and descriptions - fix power lines v5 -> v6: - Rename compatible to `ti,cc1352p7` - Fix formatting - Use kerneldoc - Add clocks, power-gpios, reset-gpios to dt bindings v4 -> v5: - Move DT Bindings to net - Rename compatible to `beagle,play-cc1352` - Expose CC1352 as MCU - Remove redundant tracing messages - Fix memory leaks v3 -> v4: - Add DT Bindings - Reorder commits - Improve commit messages v2 -> v3: - Move gb-beagleplay out of staging v1 -> v2: - Combine the driver into a single file - Remove redundant code - Fix Checkpatch complaints - Other suggested changes Ayush Singh (3): dt-bindings: net: Add ti,cc1352p7 greybus: Add BeaglePlay Linux Driver dts: ti: k3-am625-beagleplay: Add beaglecc1352 .../devicetree/bindings/net/ti,cc1352p7.yaml | 51 ++ MAINTAINERS | 7 + .../arm64/boot/dts/ti/k3-am625-beagleplay.dts | 6 + drivers/greybus/Kconfig | 10 + drivers/greybus/Makefile | 2 + drivers/greybus/gb-beagleplay.c | 501 ++++++++++++++++++ 6 files changed, 577 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/ti,cc1352p7.yaml create mode 100644 drivers/greybus/gb-beagleplay.c base-commit: 6269320850097903b30be8f07a5c61d9f7592393 -- 2.41.0
