On Tue, Sep 26, 2023 at 08:24:40PM +0200, Konrad Dybcio wrote:
>
> GPU_SMMU SID 1 is meant for Adreno LPAC (Low Priority Async Compute).
> On platforms that support it (in firmware), it is necessary to
> describe that link, or Adreno register access will hang the board.
>
> Add that and fix up the SMR mask of SID 0, which seems to have been
> copypasted from another SoC.
>
> Fixes: 96c471970b7b ("arm64: dts: qcom: sc7280: Add gpu support")
> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sc7280.dtsi | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index c38ddf267ef5..0d96d1454c49 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -2603,7 +2603,8 @@ gpu: gpu@3d00000 {
> "cx_mem",
> "cx_dbgc";
> interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
> - iommus = <&adreno_smmu 0 0x401>;
> + iommus = <&adreno_smmu 0 0x400>,
> + <&adreno_smmu 1 0x400>;
Aren't both functionally same? 401 works fine on sc7280. You might be
having issue due to Qcom TZ policies on your platform. I am okay with the change, but can
you please reword the commit text?
-Akhil.
> operating-points-v2 = <&gpu_opp_table>;
> qcom,gmu = <&gmu>;
> interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
>
> --
> 2.42.0
>
